User Manual: Modern Concealed Thermostatic Shower Diverter Valve

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your GETSHOWERSET Modern Concealed Thermostatic Shower Diverter Valve. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Safety Information

• Ensure all water supply lines are turned off before beginning installation or maintenance.
• Installation should be performed by a qualified professional if you are unsure about any steps.
• Verify all connections are secure and watertight to prevent leaks.
• The thermostatic cartridge is designed to prevent scalding, especially important for children, pregnant women, and the elderly. Do not tamper with the factory temperature settings without understanding the implications.
• Protect the product from freezing temperatures.

Product Features

The GETSHOWERSET Thermostatic Shower Diverter Valve is designed for durability, precision, and ease of use. Key features include:

• Solid Brass Construction: Made from high-quality solid brass for long-lasting durability and reliability.
• LED Digital Display: An intelligent LED display shows real-time water temperature without requiring batteries, powered by water flow.
• Thermostatic Control: Features a cUPC-certified thermostatic and pressure-balanced cartridge to maintain a consistent water temperature and prevent sudden changes, ensuring anti-scald protection.
• Multi-functional Operation: Each function (e.g., showerhead, body jets, handheld) is individually controlled by a single push-button. All functions can operate simultaneously or separately.
• Adjustable Flow Control: Independent handwheel rotation allows for precise adjustment of water flow.
• Integrated Check Valves: Inlets include built-in check valves to prevent backflow.

Figure 1: Overview of the Push-Button Thermostatic Valve with labeled controls.

Figure 2: Detail of the LED Digital Display, powered by water flow.

Installation Guide

This concealed shower valve is designed for easy installation with G1/2" standard threads. An embedded box design simplifies maintenance.

Pre-installation Checklist:

• Ensure you have all necessary tools and plumbing materials (e.g., copper, PVC, or PEX pipes).
• Confirm water supply lines (hot and cold) are accessible and correctly identified.
• Prepare the wall cavity for the embedded box.

Installation Steps:

1. Mount the Embedded Box: Securely mount the valve's embedded box within the wall cavity according to local plumbing codes and desired height.
2. Connect Water Inlets: Connect the hot and cold water supply lines to the designated G1/2" inlets on the valve. Hot water inlet is typically on the left, cold on the right.
3. Connect Outlets: Connect the G1/2" outlet lines to your shower components (showerhead, body jets, handheld shower). This valve supports up to three outlets.
4. Connect LED Display Wires: Carefully connect the two wires for the LED digital display in the correct position. Failure to do so will prevent the display from working.
5. Test for Leaks: Before closing the wall, turn on the water supply and thoroughly check all connections for leaks.
6. Install Trim and Knobs: Once the wall is sealed and no leaks are detected, install the trim plate, push-buttons, and control knobs.

Figure 3: Easy Installation Diagram with G1/2" Standard Connections.

Figure 4: Detail of wire connections and thermostatic control knob.

Operating Instructions

Your GETSHOWERSET valve offers intuitive control over water temperature and flow for a personalized shower experience.

1. Push-Button On/Off for Outlets:

• To activate a shower outlet (e.g., showerhead, body jets, handheld), push the corresponding button in.
• To deactivate an outlet, pull the corresponding button out.
• Multiple outlets can be active simultaneously.

2. Temperature Control:

• The large knob on the right controls the water temperature.
• Rotate the knob to adjust the temperature. The LED digital display will show the real-time temperature.
• The thermostatic cartridge is set to a default safe temperature (e.g., 38°C) to prevent scalding. You can adjust it to your preference.

3. Flow Regulation:

• The smaller knobs (handwheels) below the push-buttons allow you to adjust the water flow rate for each active outlet.
• Rotate the handwheel clockwise to increase water flow.
• Rotate the handwheel counter-clockwise to reduce water flow.

Figure 5: Water Flow Adjustment using Independent Handwheel Rotation.

Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your shower valve.

• Cleaning: Clean the surface of the valve and trim with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Thermostatic Cartridge: If you experience inconsistent temperature, the thermostatic cartridge may need cleaning or replacement. This should ideally be done by a qualified plumber.
• Check for Leaks: Periodically inspect visible connections for any signs of leaks. Address any leaks promptly to prevent water damage.

Troubleshooting

Specifications

Warranty and Support

GETSHOWERSET is committed to providing high-quality products and customer service.

• Warranty: We offer a 3-year warranty, which includes free replacement of valve cartridges and fittings.
• Customer Support: If you encounter any issues or require assistance, please contact us via email. Our professional after-sales team is ready to assist you.
• Returns/Replacements: If the product you receive is defective, we will offer free replacement or return services.