Introduction
Thank you for choosing the Rolosar Wireless Earbuds Q76. These earbuds are designed to provide a high-quality audio experience with advanced features for active lifestyles. This manual will guide you through the setup, operation, and maintenance of your new earbuds.
Image: Rolosar Wireless Earbuds Q76 in their charging case, showcasing the dual LED display for battery levels.
Setup
1. Charging the Earbuds and Case
Before first use, ensure both the earbuds and the charging case are fully charged. Connect the charging case to a USB power source using the provided cable. The LED display on the case will indicate the charging status.
- Earbuds charging time: Approximately 1.5 hours.
- Charging case time: Approximately 2 hours.
Image: Visual representation of the earbuds' playtime (10 hours per charge, 50 hours with case) and charging durations.
2. Pairing with Your Device
The Rolosar Q76 earbuds feature one-step auto-pairing for convenience.
- Open the lid of the charging case. The earbuds will automatically power on and enter pairing mode.
- On your smartphone or Bluetooth-enabled device, open the Bluetooth settings.
- Search for and select "Q76" from the list of available devices to connect.
- Once connected, you will hear a confirmation tone, and the earbuds will be ready for use.
Image: Step-by-step guide for Bluetooth pairing, showing the earbuds and a smartphone with the 'Q76' device listed.
Video: Demonstrates the process of connecting the wireless earbuds to a cell phone.
Operating Instructions
1. Wearing the Earbuds
The Rolosar Q76 earbuds feature an earhook design for a secure and comfortable fit, especially during sports activities.
- Choose the right size ear caps (S, M, L) for optimal comfort and sound quality.
- Place the earbud into your ear canal.
- Rotate and adjust the earhook over your ear until it feels comfortable and secure.
Image: Instructions on how to wear the earbuds, including selecting ear cap size, placing the earbud, and adjusting the earhook.
2. Smart Touch Controls
The earbuds are equipped with high-sensitivity smart touch controls for easy management of audio and calls.
| Action | Control |
|---|---|
| Power ON/OFF | Touch and hold |
| Play/Pause | Single tap |
| Answer a call | Single tap |
| Reject a call | Touch and hold |
| Hang up | Single tap during call |
| Volume +/- | Specific tap patterns (refer to diagram) |
| Previous/Next Song | Specific tap patterns (refer to diagram) |
| Voice Assistant | Triple tap |
Image: Detailed illustration of the touch control functions for the earbuds, including power, playback, call management, and voice assistant.
3. Audio Features
Experience high-fidelity stereo sound and deep bass with the Rolosar Q76 earbuds. They are equipped with ENC (Environmental Noise Canceling) microphones for clear calls.
- Hi-Fi Stereo & Deep Bass: Enjoy rich and immersive audio.
- ENC Noise Canceling Mic: Reduces ambient noise for clearer voice calls.
- 14.2mm Dynamic Drivers: Deliver powerful sound performance.
Image: Exploded view diagram highlighting the internal components responsible for Hi-Fi stereo sound, deep bass, call noise reduction, dual channel transmission, and AAC audio coding.
Video: Overview of the Rolosar Wireless Earbuds, highlighting their Bluetooth 5.3 connectivity, sport design, and ENC microphone.
Maintenance
1. Cleaning
- Regularly clean the earbuds, especially the ear tips and charging contacts, with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical sprays.
2. Storage
- Store the earbuds in their charging case when not in use to protect them and keep them charged.
- Avoid storing in extreme temperatures or high humidity.
3. Waterproof Rating
The earbuds are IP7 waterproof, meaning they are protected against immersion in water up to 1 meter for up to 30 minutes. This makes them suitable for workouts and running, protecting against rain, sweat, and splashes.
Image: Visual representation of the IP7 waterproof capabilities, indicating protection against rain, sweat, and splashes.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Earbuds not pairing | Ensure earbuds are charged. Turn off and on Bluetooth on your device. Forget "Q76" from your device's Bluetooth list and re-pair. |
| No sound from one earbud | Place both earbuds back in the case, close the lid, then open again. Check device's audio balance settings. |
| Low volume | Adjust volume on both earbuds and connected device. Ensure ear tips are properly sealed in your ear canal. |
| Charging issues | Clean charging contacts on earbuds and case. Try a different charging cable or power adapter. |
| Call quality issues | Ensure microphone is not obstructed. Move closer to your connected device. Reduce environmental noise if possible. |
Specifications
| Feature | Detail |
|---|---|
| Model | Q76 |
| Bluetooth Version | 5.4 |
| Play Time (Earbuds) | 8-10 Hours |
| Total Play Time (with Charging Case) | Over 50 Hours |
| Earbuds Charging Time | 1.5 Hours |
| Case Charging Time | 2 Hours |
| Impedance | 32 Ω |
| Frequency Range | 2.402-2.480GHz |
| Bluetooth Range | 10 Meters |
| Battery Capacity (Headset) | 50mAh |
| Battery Capacity (Charging Case) | 500mAh |
| Waterproof Rating | IP7 |
| Dimensions | 3.15 x 1.97 x 1.18 inches |
| Item Weight | 5 ounces |
Image: Detailed parameters of the Rolosar Q76 earbuds, including model, play time, charging time, impedance, frequency range, wireless transmit power, and battery specifications.
Warranty and Support
Rolosar provides a 2-year warranty for the Wireless Earbuds Q76. We are committed to providing excellent customer service with a 24-hour response time.
Important Safety Information
WARNING!!! Do not disassemble, hit, or burn the device.
Contact Information for Support
| Region | Representative | Contact Details |
|---|---|---|
| UK REP | CYRUS-Consulting Ltd | Address: 40 Sheepcote Drive, Rugby, England, CV 239 FG E-mail: manager@cyrus-consultingltd.co.uk Tel: +44 7763 280 902 |
| EC REP | eVatmaster Consulting GmbH | Address: Bettinastr.30, 60325 Frankfurt am Main, Germany Email: contact@evatmaster.com |
Image: Contact details for UK and EC representatives, along with a warning against disassembling, hitting, or burning the device.
Compliance Information
This device complies with relevant FCC, UKCA, CE, and RoHS standards. Made in China.
Image: Regulatory compliance markings such as the WEEE symbol, recycle symbol, UKCA, CE, RoHS, and FCC ID, indicating manufacturing origin.