FOUR UNCLES 6L Manual Oil Extractor Pump Instruction Manual

Introduction

The FOUR UNCLES 6L Manual Oil Extractor Pump is designed for efficient and clean fluid extraction from various vehicles and equipment. This portable hand pump simplifies tasks such as automotive oil changes, transmission fluid removal, and brake fluid bleeding, eliminating the need to access the underside of a vehicle. Its robust design and multiple accessories ensure versatility and ease of use for both professional and DIY applications.

Image: The FOUR UNCLES 6L Fluid Extractor Pump in action, demonstrating its ease of use for fluid changes.

Safety Information

Always prioritize safety when handling automotive fluids. Wear appropriate personal protective equipment, including gloves and eye protection. Ensure proper ventilation in your work area.

• Forbidden Fluids: Do NOT use the extractor with gasoline or fluids exhibiting high volatility, high corrosion, high alkalinity, or high temperatures.
• Fluid Disposal: Always dispose of used fluids responsibly according to local environmental regulations.
• Secure Placement: Ensure the extractor is placed on a stable, level surface during operation to prevent spills.

Package Contents

Verify that all items are present in your package:

• 1 x 6L Oil Container
• 1 x Hand Pump
• 5 x Hoses (including 59" main hose and three 41" extension tubes)
• 1 x Waste Oil Nozzle (Pour Spout)
• 2 x Replacement Parts (pressure release plug, rubber pad)
• 1 x Connection Adapter
• 1 x Brake Bleeding Hose (19")
• 1 x Anti-Dust Sealing Cap

Image: Detailed diagram showing all components included with the FOUR UNCLES 6L Manual Oil Extractor Pump.

Product Overview

The FOUR UNCLES 6L Manual Oil Extractor features a durable 6-liter container with clear capacity markings for easy monitoring. It includes a robust hand pump for creating vacuum, an upgraded aluminum pressure release plug for durability, and a wide base for stability. A variety of tubes are provided to accommodate different vehicle types and fluid extraction needs.

Image: The FOUR UNCLES 6L Manual Oil Extractor Pump displayed with its main components and accessories.

Key Features:

• Portable Design: Lightweight 6-liter hand pump for easy transport and use.
• Quick Extraction: Generates strong vacuum with manual pumping for rapid fluid removal.
• Multiple Tubes: Includes a 59" transparent main hose and three 41" extension tubes of varying diameters for diverse applications.
• Brake Bleeding Hose: Additional 19" hose specifically for brake fluid changes.
• User-Friendly Design: Features clear volume markings, a pour spout for easy disposal, and an extra-wide stable base.

Image: Close-up view of the upgraded aluminum pressure release plug, highlighting its durable construction.

Image: Illustration detailing the different sizes and lengths of the main and extension tubes provided.

Setup

1. Install the Main Tube: Connect the main transparent hose to the oil extractor tank. Rotate it counter-clockwise to securely lock it in place.
2. Connect Extension Tube: Select an appropriate extension tube that fits your vehicle's dipstick hole. Connect it firmly to the main tube.

Operating Instructions

Engine Oil Extraction (Manual Mode)

1. Warm Up Oil: For optimal extraction, warm up the engine oil by running the engine for a few minutes. This makes the oil less viscous.
2. Remove Dipstick: Locate and remove the engine oil dipstick.
3. Insert Tube: Carefully insert the connected main and extension tubes into the dipstick pipe until it reaches the bottom of the oil pan.
4. Pump Handle: Close the air control valve (if applicable) and continuously pump the handle 10-20 times to create a strong vacuum. The fluid will begin to extract automatically once a siphon is established. Continue pumping as needed to maintain vacuum.
5. Monitor Extraction: Observe the transparent main hose to monitor the oil flow and quality. The markings on the side of the tank help track the amount of oil removed.

Image: Step-by-step visual guide for engine oil extraction using the manual pump.

Brake Fluid Change

The extractor can also be used for brake fluid bleeding:

1. Connect Bleeding Hose: Attach the dedicated 19" brake bleeding hose to the main unit.
2. Connect to Caliper: Connect the other end of the bleeding hose to the brake caliper's bleed screw.
3. Bleed Brakes: Follow standard brake bleeding procedures, using the hand pump to create vacuum and draw out old brake fluid. Ensure the brake fluid reservoir does not run dry.

Image: The FOUR UNCLES extractor connected to a brake caliper for fluid bleeding.

Fluid Disposal

Once extraction is complete, remove the main hose. Attach the waste oil nozzle (pour spout) to the designated opening on the tank. Carefully pour the used fluid into a suitable container for recycling or proper disposal. Do not exceed the limited line on the tank.

Image: The extractor's pour spout facilitating clean transfer of used fluid.

Maintenance

• Cleaning: After each use, clean the tubes and the main container thoroughly to prevent contamination and prolong the life of the unit.
• Storage: Store the extractor in a clean, dry place away from direct sunlight and extreme temperatures.
• Check Seals: Periodically inspect all hoses, connections, and seals for any signs of wear or damage. Replace worn parts using the provided replacement components.

Troubleshooting

• Loss of Vacuum: Check all connections for tightness. Ensure the main tube and extension tubes are securely fitted. Inspect rubber seals and the pressure release plug for damage.
• Slow Extraction: Ensure the fluid is adequately warm. Verify that the tube is inserted correctly to the bottom of the fluid reservoir. Check for any kinks or blockages in the hoses.

Specifications

Warranty and Support

FOUR UNCLES is committed to providing superior products and services. For any questions, concerns, or support needs regarding your 6L Manual Oil Extractor Pump, please refer to the official FOUR UNCLES store or contact customer service.

Visit the official FOUR UNCLES Store: FOUR UNCLES Store