Eagle Torch PT 116B

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Eagle Torch Mini Angle Torch PT 116B User Manual

Model: PT 116B

1. Safety Information

Read all instructions and warnings before using this torch. Failure to follow these instructions may result in fire, injury, or property damage.

  • Keep out of reach of children. This product is not a toy.
  • Use only high-quality butane gas for refilling. Do not use gasoline or other flammable liquids.
  • Operate in a well-ventilated area.
  • Do not expose to temperatures exceeding 50°C (122°F) or to prolonged sunlight.
  • Do not puncture or incinerate the torch.
  • Keep away from face and clothing during ignition and operation.
  • Ensure the flame is extinguished before storing.
  • Do not attempt to disassemble or repair the torch. Contact customer support for assistance.

2. Product Overview

The Eagle Torch Mini Angle Torch PT 116B is a compact and versatile butane-powered torch designed for various applications, including kitchen use, DIY projects, and outdoor activities. Its angled design provides ergonomic handling and precise flame control.

Eagle Torch Mini Angle Torch PT 116B

Image 1: Eagle Torch Mini Angle Torch PT 116B. This image displays the compact design of the torch, highlighting its angled head and general appearance.

Components:

  • Flame Nozzle: Where the butane flame exits.
  • Ignition Button: Activates the piezoelectric ignition system.
  • Flame Adjustment Lever/Dial: Controls the flame size and intensity.
  • Gas Refill Valve: Located at the bottom of the torch for butane refilling.
  • Fuel Window (if applicable): Allows viewing of butane fuel level.

3. Setup: Refilling with Butane Gas

The torch is shipped without fuel and must be filled with butane gas before first use. Use only high-quality butane gas for optimal performance and safety.

  1. Ensure the torch is off: Verify that the flame adjustment is set to the lowest setting and the ignition is not engaged.
  2. Invert the torch: Hold the torch upside down to expose the refill valve at the base.
  3. Insert butane nozzle: Firmly press the nozzle of the butane gas canister vertically into the refill valve.
  4. Refill: Hold for approximately 5-10 seconds. You may hear a hissing sound as the gas transfers. Repeat if necessary until the torch is full (do not overfill).
  5. Allow to stabilize: After refilling, wait 2-3 minutes for the gas to stabilize and reach room temperature before attempting to ignite. This helps prevent an unstable flame.

Note: If the torch does not ignite immediately after refilling, it may be due to air trapped in the fuel tank. Purge the air by gently pressing the refill valve with a small tool until a small amount of gas escapes, then try refilling again.

4. Operation

4.1. Igniting the Torch

  1. Adjust flame: Set the flame adjustment lever/dial to a medium setting.
  2. Ignite: Point the torch away from your face and body. Press and hold the ignition button. A flame should appear from the nozzle.
  3. Continuous flame (if applicable): Some models may have a flame lock feature. If present, engage the lock after ignition to maintain a continuous flame without holding the button.

4.2. Adjusting the Flame

Use the flame adjustment lever or dial to control the size and intensity of the flame. Turn towards '+' for a larger flame and towards '-' for a smaller flame. Always adjust carefully.

4.3. Extinguishing the Flame

Release the ignition button. If a flame lock is engaged, disengage it to turn off the flame. Ensure the flame is completely extinguished before setting the torch down or storing it.

5. Maintenance

5.1. Cleaning

  • Ensure the torch is cool and empty of fuel before cleaning.
  • Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Keep the flame nozzle clear of debris. Use a small brush or compressed air if necessary.

5.2. Storage

  • Store the torch in a cool, dry place, away from direct sunlight and heat sources.
  • Ensure the torch is completely extinguished and cooled before storage.
  • Store out of reach of children.

6. Troubleshooting

ProblemPossible CauseSolution
No flame or weak flame after ignition.
  • Low or no butane fuel.
  • Air trapped in the fuel tank.
  • Flame adjustment set too low.
  • Clogged nozzle.
  • Refill with butane gas (see Section 3).
  • Purge air from the tank and refill.
  • Adjust the flame lever/dial to a higher setting.
  • Gently clean the nozzle.
Inconsistent or sputtering flame.
  • Low fuel level.
  • Improper butane quality.
  • Air in the fuel tank.
  • Refill with butane.
  • Use high-quality triple-refined or higher butane.
  • Purge air and refill.
Gas leakage from refill valve.
  • Valve not sealed properly.
  • Damage to the valve.
  • Ensure butane canister nozzle is pressed firmly and straight during refilling.
  • If leakage persists, discontinue use and contact customer support.

7. Specifications

  • Brand: Eagle Torch
  • Model: PT 116B
  • Material: Plastic
  • Fuel Type: Butane Gas (Note: Product data incorrectly listed "Gasoline". This product uses Butane.)
  • Ignition: Piezoelectric
  • Dimensions: (Approximate, as specific dimensions are not provided) Compact mini size.

8. Warranty & Support

For warranty information or technical support, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.

For further assistance, please refer to the contact information provided with your purchase or visit the official Eagle Torch website.

© 2023 Eagle Torch. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.