Introduction
Thank you for choosing the VIVIJASON Large 61-inch Round Patio Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor dining table. Please read these instructions thoroughly before beginning assembly and retain them for future reference.
Safety Information
- Always secure any patio umbrella inserted into the table's umbrella hole to prevent tipping, especially in windy conditions. An unsecured umbrella can cause injury or damage.
- Ensure the table is stable and level on a flat surface before use. Uneven surfaces can lead to instability.
- Do not exceed the maximum weight capacity of 165 lbs on the tabletop.
- Keep small children and pets away from the assembly area. Small parts can be a choking hazard.
- Use appropriate tools as specified in the assembly guide.
- Periodically check all bolts and connections to ensure they remain tight.
Package Contents
Before assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop sections (4 pieces)
- Table legs (4 pieces)
- Center support frame
- Hardware pack (bolts, washers, nuts, Allen wrench)
- Assembly Guide (this document)
Image: Diagram illustrating the table's dimensions (61" diameter, 29.5" height) and indicating that the desktop consists of four panels. It also shows seating capacities for 4, 6, and 8 persons, and a 2-inch umbrella hole.
Assembly Instructions
Assembly typically requires two people. Follow these general steps. Refer to the included detailed assembly guide for specific diagrams and hardware identification.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
- Assemble Tabletop: Connect the four tabletop sections using the provided hardware. Ensure the umbrella hole aligns correctly in the center. Do not fully tighten bolts at this stage.
- Attach Legs to Center Support: Secure the table legs to the central support frame using the designated bolts and washers.
- Connect Tabletop to Legs: Carefully align the assembled tabletop with the leg and support structure. Attach the tabletop to the legs using the remaining hardware.
- Final Tightening: Once all components are loosely assembled and aligned, gradually tighten all bolts evenly. Do not overtighten.
- Adjust Leveling Feet: Turn the table upright. Adjust the foot pads on each leg to ensure the table is stable and level on your patio surface.
Image: The fully assembled VIVIJASON 61-inch round patio dining table, showcasing its dark bronze cast aluminum finish and intricate lattice pattern.
Operating Instructions
The VIVIJASON patio dining table is designed for outdoor dining and leisure. Its robust cast aluminum construction ensures durability.
- Umbrella Use: The table features a 2-inch umbrella hole. Insert a compatible patio umbrella and ensure it is properly secured with a base (not included) to prevent tipping.
- Seating Capacity: This 61-inch round table comfortably accommodates 6-8 persons.
- Placement: Position the table on a flat, stable surface. Avoid placing it on uneven ground where it might wobble.
Image: A detailed view of the 2-inch umbrella hole in the center of the table, with a patio umbrella inserted, demonstrating its functionality.
Maintenance and Care
Proper care will extend the life and appearance of your VIVIJASON patio dining table.
- Cleaning: The cast aluminum frame is easy to clean. Simply hose down the table with water. For stubborn dirt, use a mild soap solution and a soft cloth, then rinse thoroughly. Avoid harsh chemicals or abrasive cleaners.
- Rust Resistance: The powder-coated finish provides excellent rust resistance. However, regular cleaning helps maintain this protective layer.
- Winter Storage: In colder climates, it is recommended to cover the table or store it indoors during winter months to protect it from extreme weather conditions.
- Inspection: Periodically inspect all bolts and connections for tightness. Tighten as necessary to ensure structural integrity.
Image: A hand wiping the cast aluminum tabletop with a damp cloth, illustrating the ease of cleaning and highlighting its waterproof and rust-resistant properties.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Uneven surface; Loose bolts; Uneven leg pads | Move table to a flat surface. Tighten all assembly bolts. Adjust the leveling foot pads on each leg. |
| Difficulty assembling parts | Incorrect alignment; Overtightened bolts prematurely | Ensure parts are aligned correctly according to the assembly guide. Loosen all bolts, align parts, then gradually tighten. |
| Umbrella does not fit or is unstable | Incorrect umbrella size; No umbrella base | Ensure your umbrella pole diameter is 2 inches or less. Always use a heavy-duty umbrella base to secure the umbrella. |
Specifications
- Brand: VIVIJASON
- Model Name: Charles
- Product Dimensions: 61" Diameter x 29.5" Height (61"D x 61"W x 29.5"H)
- Color: Antique Bronze
- Shape: Round
- Material: Cast Aluminum
- Frame Durability: Weather Resistant, UV Resistant, Rust Resistant
- Umbrella Hole Diameter: 2 Inches
- Weight Capacity: 165 lbs
- Seating Capacity: 6-8 persons
- Indoor/Outdoor Usage: Outdoor
- Recommended Number of People for Assembly: 2
Image: A graphic summarizing key specifications including dimensions (29.5 in. H x 61 in. Dia.), umbrella hole size (2.0"), material (cast aluminum), and frame durability (weather, UV, rust resistant).
Customer Support
For any questions, missing parts, or assistance with your VIVIJASON patio dining table, please contact our customer support team. Refer to your purchase documentation for specific contact details or visit the VIVIJASON brand store online.
Online Store: VIVIJASON Store
