Livarno Insect Catcher User Manual

Introduction

The Livarno Insect Catcher is designed for the humane and safe removal of insects from your home. Its simple slide mechanism allows for easy capture and release of various insects without direct contact, ensuring they can be relocated alive.

Product Overview

Setup

The Livarno Insect Catcher requires minimal setup. It is ready for use directly out of the packaging.

1. Carefully remove the insect catcher from its packaging.
2. Inspect the device for any visible damage or missing parts.
3. Ensure the slide button moves freely and the collection chamber opens and closes smoothly.

Operating Instructions

Follow these steps to effectively capture and release insects:

1. Positioning: Locate the insect you wish to capture. Hold the Livarno Insect Catcher by its handle, ensuring a secure grip on the soft-grip area.
2. Capture: Gently slide the collection chamber open using the green slide button. Carefully approach the insect, positioning the open end of the collection chamber directly over it. For small insects, ensure the collection sheet runs as close to the surface (floor, wall, etc.) as possible to scoop them up effectively.
3. Secure: Once the insect is inside the chamber, slowly release the slide button to close the chamber, trapping the insect safely inside.
4. Relocation: Carry the insect catcher to an outdoor area, away from your living space.
5. Release: Once outdoors, slide the button again to open the chamber and allow the insect to fly or crawl away freely.

Maintenance

Regular cleaning will ensure the longevity and hygienic use of your insect catcher.

• After each use, especially if the chamber has come into contact with an insect, clean the transparent collection chamber.
• Use a soft, damp cloth to wipe down the inside and outside of the chamber.
• Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the plastic.
• Ensure the device is completely dry before storing.
• Store the insect catcher in a cool, dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

• Product Dimensions: 28 x 4.5 x 5 cm
• Weight: 125 grams
• Material: Plastic
• Model Number: 373347
• Manufacturer: Owim GmbH & Co. KG
• Drive Type: Hand-powered

Warranty and Support

For detailed warranty information, terms, and conditions, please refer to the documentation provided at the time of purchase. If you require technical support or have questions regarding your Livarno Insect Catcher, please contact the retailer or the manufacturer directly using the contact information provided with your product.