onerbl Universal 5V AC/DC Adapter for Keyboards

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

onerbl 5V AC/DC Adapter User Manual

Compatible with PKBRD6111, PKBRD4112, PKBRD4911PK, Bigfun BF-6301C, BF-5301C Keyboards

1. Introduction

This manual provides essential instructions for the safe and effective use of your onerbl 5V AC/DC Adapter. This power supply is designed to provide reliable power to compatible electronic keyboards, including models PKBRD6111, PKBRD4112, PKBRD4911PK, Bigfun BF-6301C, and BF-5301C. Please read this manual thoroughly before use and retain it for future reference.

onerbl 5V AC/DC Adapter

Figure 1: The onerbl 5V AC/DC Adapter with its integrated cable and barrel connector.

2. Safety Instructions

To prevent injury or damage to your device, always follow these safety precautions:

  • Ensure the adapter's voltage and current ratings match your device's requirements. This adapter provides 5V output.
  • Do not expose the adapter to water, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the adapter to severe impact.
  • Do not attempt to open or modify the adapter. There are no user-serviceable parts inside.
  • Unplug the adapter from the power outlet when not in use or during electrical storms.
  • Keep the adapter away from children.
  • Ensure proper ventilation around the adapter during operation to prevent overheating.
  • If the adapter or cable appears damaged, discontinue use immediately.
Adapter with short-circuit, over-voltage, and over-current protection icons

Figure 2: The adapter features built-in protections against short-circuit, over-voltage, and over-current conditions.

3. Setup and Connection

  1. Verify Compatibility: Before connecting, confirm that your device requires a 5V DC input and has a compatible power input jack. This adapter is specifically designed for PKBRD6111, PKBRD4112, PKBRD4911PK, Bigfun BF-6301C, and BF-5301C keyboards.
  2. Connect to Device: Insert the barrel connector of the adapter firmly into the power input jack of your keyboard or compatible device.
  3. Connect to Power Outlet: Plug the AC prongs of the adapter into a standard AC 100-240V 50/60Hz wall outlet.
  4. Power On: Once connected, your device should receive power. Turn on your device using its power button, if applicable.
AC adapter plugged into a power strip next to a laptop

Figure 3: The adapter connected to a power source, illustrating typical usage.

4. Operating Instructions

The onerbl 5V AC/DC Adapter operates automatically once connected to a power source and a compatible device. It converts the AC wall current to the required 5V DC power for your device.

  • Ensure the adapter is securely plugged into both the wall outlet and your device.
  • The adapter is designed for continuous use within its specified operating parameters.
  • If your device has a battery, the adapter will typically charge the battery while simultaneously powering the device.

5. Care and Maintenance

Proper care will extend the life of your adapter:

  • Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and excessive heat. Avoid tightly coiling the cable to prevent damage.
  • Inspection: Periodically inspect the adapter and cable for any signs of damage, such as frayed wires, cracks, or bent prongs. If damage is found, discontinue use.
Cross-section of a power cable showing copper wires and PVC jacket

Figure 4: The adapter cable features a durable design with copper wires and a PVC jacket for longevity.

6. Troubleshooting

If you encounter issues with your adapter, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Device not powering on.Adapter not properly connected. No power from outlet. Device issue.Ensure adapter is fully plugged into both device and wall. Test outlet with another device. Check device's power button.
Adapter feels hot.Normal operation (slight warmth). Overload or poor ventilation.A slight warmth is normal. Ensure adapter is not covered and has adequate airflow. If excessively hot, unplug immediately and discontinue use.
Intermittent power.Loose connection. Damaged cable.Check all connections. Inspect cable for damage. If damaged, replace the adapter.

7. Specifications

  • Input: AC 100-240V, 50/60Hz (Worldwide AC Input)
  • Output: 5V DC
  • Wattage: 5 watts
  • Cable Length: Approximately 76 inches (6.3 feet)
  • Special Features: Over Voltage Protection, Over Heat Protection, Short-circuit Protection, Over Current Protection
  • Compatible Devices: PKBRD6111, PKBRD4112, PKBRD4911PK, BIGFUN BF-6301C, BF-5301C Keyboards
  • Dimensions (Adapter Body): Approximately 2.6 inches (length) x 1.6 inches (width) x 1.2 inches (height)
Diagram showing the dimensions of the AC adapter body and cable length

Figure 5: Physical dimensions of the adapter and its cable length.

Illustrations of various electronic devices compatible with a 5V power adapter

Figure 6: Examples of devices compatible with a 5V power adapter, including keyboards, routers, and other small electronics.

8. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact the retailer from whom the product was purchased. Keep your purchase receipt as proof of purchase.

© 2023 onerbl. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.