Adtran 17101564PF2 NetVanta 1560-24-370W 26-Port Managed Gigabit Ethernet Switch User Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of the Adtran NetVanta 1560-24-370W (model 17101564PF2) 26-Port Managed Layer 2/3 Gigabit Ethernet Switch. This enterprise-class switch is designed to deliver high-performance networking solutions, supporting Gigabit to the desktop and Voice over IP (VoIP) applications. It features advanced multilayer switching, high-bandwidth capabilities, and voice-aware features, making it suitable for scaling networks from small businesses to enterprise-sized deployments.

2. Safety Information

• Ensure proper grounding of the device to prevent electrical hazards.
• Do not operate the switch in environments with excessive moisture or extreme temperatures.
• Use only the power supply provided or specified by the manufacturer.
• Avoid blocking ventilation openings to prevent overheating.
• Refer all servicing to qualified personnel. Do not attempt to open or repair the device yourself.

3. Package Contents

Verify that all items are present in the package:

• Adtran NetVanta 1560-24-370W 26-Port Managed Gigabit Ethernet Switch (Model 17101564PF2)
• Power Cord
• Rackmount Kit (if applicable)
• Documentation (Quick Start Guide, Safety Information)

4. Product Overview

The Adtran NetVanta 1560-24-370W switch features a robust design for network connectivity and power delivery.

Figure 4.1: Front view of the Adtran NetVanta 1560-24-370W switch, showing the 24 Gigabit Ethernet ports, 2 SFP+ uplink ports, and LED indicators.

4.1. Front Panel Features

• 24 x 10/100/1000BASE-T Access Ports: These ports support Gigabit Ethernet speeds and Power over Ethernet Plus (PoE+) for connecting network devices such as IP phones, wireless access points, and surveillance cameras.
• 2 x SFP+ 10GIGE Uplink Ports: These ports provide high-speed connectivity for uplinks to other switches or network devices, supporting both 1 Gbps and 10 Gbps fiber connections.
• LED Indicators: Various LEDs indicate power status, system activity, link status, and PoE status for each port. Refer to the detailed LED guide in the full product documentation for specific meanings.

4.2. Rear Panel Features

• Power Input: Connector for the AC power cord.
• Console Port: For local management and configuration via a serial connection.
• Grounding Screw: For connecting the chassis to an earth ground.

5. Setup

1. Unpack the Switch: Carefully remove the switch and all accessories from the packaging.
2. Physical Placement:
   • Place the switch on a stable, flat surface or mount it in a standard 19-inch equipment rack using the provided rackmount kit.
   • Ensure adequate ventilation around the switch to prevent overheating. Maintain at least 10 cm (4 inches) of clear space around all ventilation openings.
3. Grounding: Connect a grounding wire from the grounding screw on the rear panel to a reliable earth ground.
4. Power Connection: Connect the power cord to the switch's power input and then to a grounded AC power outlet. The switch will power on automatically.
5. Network Connections:
   • Connect network devices (computers, IP phones, access points) to the 10/100/1000BASE-T access ports using standard Ethernet cables.
   • For high-speed uplinks, insert compatible SFP or SFP+ transceivers into the SFP+ ports and connect fiber optic cables to other network devices.
6. Initial Configuration: Access the switch's management interface via the console port or a web browser (if an IP address is assigned via DHCP or a default IP is known) to perform initial configuration, including setting up IP addresses, VLANs, and security settings. Refer to the Adtran NetVanta 1560 Series Software Configuration Guide for detailed instructions.

6. Operating Instructions

Once the switch is set up and configured, it operates autonomously to manage network traffic. Key operational aspects include:

• Power On/Off: The switch powers on automatically when connected to power. To power off, disconnect the power cord.
• LED Status Monitoring: Regularly observe the LED indicators on the front panel to monitor the status of the switch and individual ports. Green LEDs typically indicate active links and data transfer.
• Network Management: The NetVanta 1560-24-370W is a managed switch, allowing for advanced configuration and monitoring through its web-based GUI, command-line interface (CLI), or SNMP. This enables features such as VLANs, QoS, link aggregation, and security policies.
• PoE+ Functionality: The switch automatically detects and provides power to connected PoE-compatible devices up to 30W per port, with a total power budget of 370W.

7. Maintenance

• Cleaning: Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.
• Firmware Updates: Regularly check the ADTRAN support website for firmware updates. Keeping the firmware current ensures optimal performance, security, and access to new features. Follow the instructions provided by ADTRAN for firmware upgrade procedures.
• Configuration Backup: Regularly back up your switch configuration to an external storage device. This allows for quick restoration in case of a system reset or failure.

8. Troubleshooting

8.1. No Power

• Verify the power cord is securely connected to both the switch and a working power outlet.
• Check the power outlet with another device to ensure it is functional.
• Ensure the power switch (if present) is in the 'ON' position.

8.2. No Network Connectivity on a Port

• Check the Ethernet cable connection at both ends. Try a different cable.
• Verify the link/activity LED for the port. If it's off, there might be no link.
• Ensure the connected device is powered on and functioning correctly.
• Check the switch's configuration for port status (e.g., port enabled/disabled, VLAN settings).

8.3. PoE Device Not Receiving Power

• Confirm the connected device is PoE-compatible.
• Check the PoE status LED for the port.
• Verify the switch's total PoE power budget (370W) is not exceeded by all connected devices.
• Ensure PoE is enabled on the port in the switch's configuration.

9. Specifications

10. Warranty and Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official ADTRAN website. ADTRAN provides technical support and resources for its products. For assistance, please contact ADTRAN customer support or visit their online support portal for documentation, FAQs, and software downloads.

ADTRAN Official Website: www.adtran.com