AKKON 5-HD-JH-CSIL22-OE-L

AKKON Headlight Assembly User Manual

Model: 5-HD-JH-CSIL22-OE-L | For 2022-2024 Chevy Silverado 1500 (Halogen Type)

1. Product Overview

This AKKON headlight assembly is a 100% brand new replacement part designed for the driver's left side of 2022-2024 Chevy Silverado 1500 models equipped with halogen type headlights and black trim. It features a black housing and clear lens, providing an OE design for direct fit, form, and function.

AKKON Black Headlight Headlamp for Chevy Silverado 1500, front view

Front view of the AKKON headlight assembly, showcasing its black housing and clear lens design.

Key Features:

  • 100% Brand New in Box with Customized Packaging
  • OE Design for Direct Fit, Form, and Function
  • Direct Bolt-On Replacement for Original Parts
  • No Wiring or Other Modifications Needed
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) Approved
  • Waterproof Construction

Note: This headlight is compatible only with Halogen Type w/ Black Trim Headlight Models. It is NOT compatible with LED Type Headlight Models.

2. Safety Information

Always prioritize safety when working on your vehicle. Failure to follow these guidelines may result in injury or damage to the vehicle.

  • Professional Installation Recommended: Due to the complexity of automotive electrical systems and vehicle-specific procedures, professional installation is highly recommended.
  • Disconnect Battery: Before beginning any electrical work, always disconnect the vehicle's negative battery terminal to prevent electrical shock or short circuits.
  • Wear Safety Gear: Always wear appropriate personal protective equipment, including safety glasses and gloves.
  • Vehicle Stability: Ensure the vehicle is securely parked on a level surface with the parking brake engaged. If lifting the vehicle, use appropriate jack stands.
  • Handle with Care: Headlight assemblies contain delicate components. Handle with care to avoid damage.

3. Package Contents

Your AKKON Headlight Assembly package should contain the following item:

  • One (1) AKKON Headlight Assembly (Driver Left Side)

Inspect the contents immediately upon receipt for any signs of damage or missing parts.

4. Installation (Setup)

This product is designed as a direct bolt-on replacement. However, no specific installation guide or instruction is included with the product. Professional installation is highly recommended to ensure proper fitment, functionality, and safety.

General Installation Steps (Consult a Professional or Vehicle Service Manual):

  1. Preparation: Park the vehicle on a level surface, engage the parking brake, and disconnect the negative battery terminal.
  2. Access: Depending on your vehicle model, you may need to remove the front bumper, grille, or fender liner to access the headlight mounting bolts. Refer to your vehicle's service manual for specific instructions.
  3. Remove Old Headlight: Disconnect the electrical connectors from the existing headlight assembly. Unbolt and carefully remove the old headlight.
  4. Install New Headlight: Connect the electrical connectors to the new AKKON headlight assembly. Ensure all connections are secure. Position the new headlight into place and secure it with the mounting bolts.
  5. Test Functionality: Reconnect the negative battery terminal. Test all headlight functions (low beam, high beam, turn signal, parking light) before reassembling any removed vehicle components.
  6. Reassembly: Reinstall any removed bumper, grille, or fender liner components.
  7. Aiming: After installation, it is crucial to properly aim the headlights to ensure optimal visibility and to avoid blinding oncoming traffic. This often requires specialized equipment and should be performed by a qualified technician.
Rear view of AKKON headlight assembly showing electrical connectors and SAE DOT certification

The rear of the headlight assembly, highlighting the electrical connectors for power and signal, along with the SAE and DOT compliance markings.

5. Operating Instructions

The AKKON headlight assembly functions identically to your vehicle's original halogen headlights. Its operation is controlled by your vehicle's existing headlight switch and turn signal stalk.

  • Low Beam: Provides standard illumination for general driving conditions, designed to illuminate the road ahead without blinding oncoming drivers. Activated via your vehicle's headlight switch.
  • High Beam: Provides maximum illumination for driving in dark conditions where no oncoming traffic is present. Activated via your vehicle's high beam switch or stalk.
  • Turn Signal: The integrated amber turn signal illuminates to indicate a turn or lane change. Activated via your vehicle's turn signal stalk.
  • Parking Light: Provides low-level illumination for parking or when stopped. Activated via your vehicle's headlight switch.
Comparison of low beam and high beam illumination from the AKKON headlight

An illustration demonstrating the difference between the low beam and high beam illumination patterns produced by the headlight assembly.

Close-up of the amber turn signal light, showing off and illuminated states

Detailed view of the amber turn signal section, illustrating its appearance when off and when actively signaling.

6. Maintenance

Proper maintenance will help ensure the longevity and optimal performance of your AKKON headlight assembly.

  • Cleaning: Regularly clean the outer lens with a soft cloth and mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens.
  • Inspection: Periodically inspect the headlight assembly for any signs of damage, cracks, or condensation inside the lens. While the product is waterproof, extreme conditions or impacts can compromise the seal.
  • Bulb Replacement: This assembly uses standard halogen bulbs. If a bulb burns out, replace it with a bulb of the correct type and wattage as specified by your vehicle manufacturer. Refer to your vehicle's service manual for bulb replacement procedures.

7. Troubleshooting

If you experience issues with your new headlight assembly, consider the following common troubleshooting steps. For complex issues, professional diagnosis is recommended.

ProblemPossible CauseSolution
Headlight not workingBlown fuse, faulty bulb, loose electrical connection, wiring issueCheck vehicle's fuse box for blown headlight fuse and replace if necessary. Inspect bulb for filament breakage and replace if faulty. Ensure all electrical connectors are securely attached. Consult a professional for wiring diagnosis.
Headlight is dimAging bulb, poor electrical connection, voltage issueReplace bulb. Check and clean electrical connections. Have vehicle's charging system and wiring inspected by a professional.
Condensation inside lensTemperature changes, minor seal breachSmall amounts of condensation may dissipate naturally. If persistent or excessive, inspect for cracks or damage to the housing/seal. Contact manufacturer if issue persists after inspection.
Headlight aim is offImproper installation, adjustment screws not setHave headlights professionally aimed using proper equipment.

8. Specifications

FeatureDescription
BrandAKKON
Model Number5-HD-JH-CSIL22-OE-L
UPC192744004199
ColorBlack Housing, Clear Lens
Specific Uses For ProductHead Lights
Vehicle Service TypeCar (Chevy Silverado 1500)
Special FeatureWaterproof
Lens MaterialPlastic
Package Dimensions21.75 x 20.75 x 14 inches
ComplianceDOT & SAE Approved

9. Warranty and Support

Specific warranty details are not provided in the product information. For warranty claims, technical support, or further inquiries, please contact AKKON directly through their official channels or the retailer from whom the product was purchased.

You can visit the AKKON Store for more information: AKKON Store on Amazon

© 2024 AKKON. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.