Introduction
Welcome to the instruction manual for your Casio G-SHOCK BGC-101-8VT digital watch. This manual provides essential information on how to set up, operate, maintain, and troubleshoot your watch. The G-SHOCK BGC-101-8VT is designed for durability and functionality, featuring shock resistance and 200-meter water resistance, making it suitable for various demanding environments. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your timepiece.
Watch Components and Button Functions
Figure 1: Front view of the Casio G-SHOCK BGC-101-8VT watch. This image shows the watch face with its digital display, indicating the time, day, and date. Labels for various buttons such as "ADJUST", "MODE", "LIGHT", "START-STOP", and "SPLIT-RESET" are visible around the bezel. The watch also features "SHOCK RESIST" and "WATER 200M RESIST" markings.
Your G-SHOCK watch features several buttons for navigating its functions. While specific button labels may vary slightly, the general functions are as follows:
- ADJUST Button (Top Left): Used to enter and exit setting modes, and to confirm selections.
- MODE Button (Bottom Left): Cycles through the watch's various modes (Timekeeping, Stopwatch, Alarm, etc.).
- LIGHT Button (Top Right or Front): Activates the backlight for illumination in low-light conditions.
- START/STOP Button (Bottom Right): Used to start and stop the stopwatch, or to increment values during setting.
- SPLIT/RESET Button (Side Right): Used for split times in stopwatch mode or to reset values.
Setup: Initial Time and Date Setting
Before using your watch, it is important to set the correct time and date.
- In the Timekeeping Mode, press and hold the ADJUST button until the city code starts to flash, indicating the setting screen.
- Use the START/STOP and SPLIT/RESET buttons to select your desired city code (time zone).
- Press the MODE button to cycle through the settings: DST (Daylight Saving Time) → 12/24-hour format → Seconds → Hour → Minute → Year → Month → Day.
- For each setting, use the START/STOP and SPLIT/RESET buttons to change the value.
- Once all settings are correct, press the ADJUST button to exit the setting mode.
Note: The watch features a full auto-calendar, meaning once the date is set, it will automatically adjust for month lengths and leap years until the year 2099.
Operating Modes
Press the MODE button to cycle through the watch's various operational modes. The typical sequence is: Timekeeping Mode → Stopwatch Mode → Alarm Mode → Timekeeping Mode (repeats).
1. Timekeeping Mode
This is the default mode, displaying the current time, day of the week, and date.
2. Stopwatch Mode
The stopwatch measures elapsed time.
- From Timekeeping Mode, press MODE to enter Stopwatch Mode. The display will show "00'00"00".
- Press START/STOP to begin timing.
- Press START/STOP again to pause the timing.
- Press SPLIT/RESET while paused to reset the stopwatch to "00'00"00".
- To record split times: While the stopwatch is running, press SPLIT/RESET to display the split time. The stopwatch continues to run internally. Press SPLIT/RESET again to return to the current elapsed time display.
3. Alarm Mode
Your watch includes an alarm function.
- From Stopwatch Mode, press MODE to enter Alarm Mode. The display will show the alarm time.
- Press and hold ADJUST until the alarm hour starts to flash.
- Use START/STOP and SPLIT/RESET to set the hour and minute.
- Press ADJUST to exit the setting mode.
- To turn the alarm ON/OFF, press START/STOP in Alarm Mode (without holding ADJUST). An indicator will show if the alarm is active.
4. Illuminator (Backlight)
Press the LIGHT button to illuminate the display for a few seconds. This feature is useful in dark environments.
Maintenance
Figure 2: Side view of the Casio G-SHOCK BGC-101-8VT watch. This image highlights the durable resin case and the distinctive gold and black striped strap, which is secured by a metal buckle.
- Cleaning: Wipe the watch regularly with a soft, dry cloth to remove dirt and moisture. For stubborn dirt, use a soft brush and mild soap solution, then rinse thoroughly with fresh water and dry. Avoid using chemical cleaners.
- Water Resistance: Your watch is rated for 200-meter water resistance. This means it is suitable for showering, swimming, and shallow diving. However, avoid operating buttons while the watch is submerged in water or wet, as this can compromise the water seal. After exposure to saltwater, rinse the watch with fresh water and dry it thoroughly.
- Temperature Extremes: Avoid exposing your watch to extreme temperatures (e.g., direct sunlight on a car dashboard, very cold environments) for extended periods, as this can affect battery life and internal components.
- Battery Replacement: The watch uses a long-life battery. When the display becomes dim or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by an authorized Casio service center to ensure proper re-sealing for water resistance.
- Shock Resistance: While designed to be shock-resistant, avoid unnecessary impacts. Severe shocks can still cause damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low battery. | Replace the battery at an authorized service center. |
| Time is incorrect. | Time settings are wrong or DST is incorrect. | Re-adjust the time and date settings as described in the "Setup" section. Check DST setting. |
| Buttons do not respond. | Watch may be in a frozen state or internal malfunction. | Try removing and reinserting the battery (if comfortable doing so, otherwise seek professional service). If problem persists, contact support. |
| Water inside the watch. | Buttons operated underwater or seal compromised. | Immediately take the watch to an authorized service center for inspection and repair to prevent further damage. |
Specifications
Figure 3: The Casio G-SHOCK BGC-101-8VT watch presented within its original elongated protective case. This view emphasizes the watch's packaging and overall presentation.
- Model Number: BGC-101-8VT
- Brand: CASIO
- Movement: Quartz
- Display Type: Digital
- Case Shape: Round
- Case Material: Resin
- Band Material: Resin (Gold and Black)
- Water Resistance: 200 meters (20 BAR)
- Special Features: Shock Resistant, Stopwatch (Chronometer), Full Auto Calendar, Illuminator (Backlight), Alarm.
- First Available Date: December 19, 2023
Warranty and Support
Figure 4: Close-up side view of the Casio G-SHOCK BGC-101-8VT watch strap. This image provides a detailed look at the gold and black striped design of the strap, including the "TOUGH LABEL" branding embossed on it, emphasizing the watch's durable construction.
For information regarding warranty coverage, service, or technical support, please refer to the official Casio website or contact your authorized Casio dealer. Keep your purchase receipt as proof of purchase for warranty claims.
Casio continually strives to improve its products. Specifications and external appearance are subject to change without prior notice.
