1. Introduction
This instruction manual provides comprehensive guidance for the installation, maintenance, and general use of the TECHPICCO Mud Flap Delete Kit. Designed specifically for the Chevrolet Silverado 1500 models from 2019 to 2025, these mud flap deletes offer a clean aesthetic while protecting your vehicle's undercarriage from road debris.
2. Product Features
- Vehicle Specific Design: Custom-engineered for 2019-2025 Chevy Silverado 1500 (not compatible with GMC Sierra) to ensure precise fitment and enhanced vehicle aesthetics.
- Durable Material: Constructed from high-quality ABS material, providing maximum strength and durability, designed to withstand harsh road conditions.
- No-Drill Installation: Features a simple, direct-replacement installation process that does not require drilling, utilizing original car holes.
- Easy Removal: Designed for easy disassembly, allowing for reinstallation of original mud flaps if desired.
- UV Protection: UV-protected to prevent fading and maintain appearance over time.
- Spare Screws Included: Comes with spare screws to facilitate installation and replacement.
3. Package Contents
Please verify that all components are present and undamaged before beginning installation.
- 4 x Mud Flap Delete Pieces (2 front, 2 rear)
- Mounting Screws (sufficient quantity for installation and spares)
Figure 3.1: Complete Mud Flap Delete Kit with all components.
4. Safety Information
Always prioritize safety during installation. Wear appropriate personal protective equipment, such as gloves and eye protection. Ensure the vehicle is parked on a level surface and the parking brake is engaged. If you are unsure about any step, consult a professional mechanic.
5. Installation Guide
The TECHPICCO Mud Flap Delete Kit is designed for a straightforward, no-drill installation, utilizing existing mounting points on your Chevrolet Silverado 1500.
5.1. Tools Required
- Screwdriver or appropriate wrench for existing mud flap screws.
- Cleaning cloth.
5.2. Installation Steps
- Prepare the Vehicle: Park your Chevy Silverado 1500 on a flat, stable surface. Engage the parking brake.
- Remove Original Mud Flaps: Carefully remove the existing mud flaps from your vehicle. This typically involves unscrewing them from the fender liner. Retain the original screws if you plan to reinstall the factory mud flaps in the future.
Figure 5.1: Before and After Mud Flap Delete Installation.
- Clean the Area: Clean any dirt or debris from the area where the mud flaps were removed to ensure a clean fit for the new delete pieces.
- Align the Mud Flap Delete: Take one of the TECHPICCO mud flap delete pieces and align it with the original mounting holes in the fender well. Ensure it sits flush against the vehicle body.
Figure 5.2: Alignment with Original Car Holes (No Drilling Required).
- Secure with Screws: Use the provided screws to secure the mud flap delete piece into the existing holes. Tighten the screws firmly but do not overtighten to avoid damaging the plastic.
Figure 5.3: Easy Installation Steps.
- Repeat for Remaining Pieces: Follow the same steps for the remaining three mud flap delete pieces (front and rear).
- Final Check: Once all pieces are installed, visually inspect them to ensure they are securely fastened and properly aligned.
5.3. Installation Video
For a visual guide on the installation process, please refer to the official product video below:
Video 5.1: Official installation guide for TECHPICCO Mud Flap Delete.
6. Operating and Usage
Once installed, the mud flap delete pieces function by covering the exposed areas left by the removal of factory mud flaps, providing a cleaner, more streamlined appearance. They are designed to protect the vehicle's body from road debris, dirt, and minor impacts across various driving conditions, including snow, water, mud, and rocky terrains.
Figure 6.1: Suitable for various road conditions.
7. Maintenance
The TECHPICCO Mud Flap Delete pieces require minimal maintenance due to their durable ABS construction and UV protection. Regular cleaning with soap and water is sufficient to maintain their appearance. Avoid using harsh chemicals or abrasive cleaners that could damage the finish.
Figure 7.1: UV Protection for Long-lasting Appearance.
8. Troubleshooting
If you encounter any issues during or after installation, please refer to the following common troubleshooting tips:
- Fitment Issues: Ensure that the mud flap delete pieces are correctly oriented (front vs. rear, left vs. right) and aligned with the original mounting holes. Verify your vehicle's model year and compatibility with the product (2019-2025 Chevy Silverado 1500 only, not GMC Sierra).
- Loose Fit: Double-check that all screws are tightened securely. Avoid overtightening, which can strip the threads or crack the plastic.
- Missing Screws: The kit includes spare screws. If you lose any during installation, use the provided spares.
- Damage During Installation: If a piece is damaged, contact customer support for assistance.
9. Specifications
| Attribute | Detail |
|---|---|
| Brand | TECHPICCO |
| Model Number | DNBYC-Silverado-BK |
| Color | Black |
| Vehicle Service Type | Chevy Silverado 1500 (2019-2025) |
| Auto Part Position | Front and Rear |
| Installation Type | Screw-In (No Drilling Required) |
| Material | ABS Plastic |
| Item Weight | 12.3 ounces |
| Package Dimensions | 11.69 x 9.69 x 2.8 inches |
10. Warranty and Support
10.1. Warranty Information
TECHPICCO products are manufactured to high-quality standards. For specific warranty details regarding your Mud Flap Delete Kit, please refer to the product packaging or contact TECHPICCO customer support directly. General return policy allows for returns within 30 days of purchase.
10.2. Customer Support
If you have any questions, require technical assistance, or need to report an issue, please contact TECHPICCO customer support through the retailer's platform or visit the official TECHPICCO brand store:
