Installation Guide for TECHPICCO models including: 2022-2024 Universal License Plate Frames Front License Plate Bracket, 2022-2024, Universal License Plate Frames Front License Plate Bracket, License Plate Frames Front License Plate Bracket, Plate Frames Front License Plate Bracket, Front License Plate Bracket, License Plate Bracket, Plate Bracket, Bracket
TECHPICCO Universal License Plate Frames Front License Plate Bracket, no Drill Front License Plate Holder Compatible with Ford Maverick 2022-2024 (Black) | Fits Most of Vehicle Front Grille : Automotive
TECHPICCO License Plate Frames for Maverick 2022-2025, No Drill Front License Plate Bracket Holder Compatible with Ford Maverick 2022-2025 (Black) | Fits Most of Vehicle Front Grille : Automotive
CPJ-TY-ZW-BK Installation Manual (PDF) TECHPICCO TECHPICCO License,Plate,Frames,for,Maverick,2022-2025,No,Drill,Front,License,Plate,Bracket,Holder,Compatible,with,Ford,Maverick,2022-2025,(Black),|,Fits,Most,of,Vehicle,Front,Grille,B0CQT3G7WT,B0CQTCWGRB
STEP 1: Assembly the grille mount BODY. Stick foam pads on the BODY backing, pre-install M6X50 countersunk bolts, washers and grille clamps. STEP 2: Mount the BODY on your vehicle grille. Find a suitable mounting location on your vehicle's grille, attach the clamps to the back of the grille and tighten countersunk bolts. (DO NOT OVERTIGHTEN) STEP 3: Install the extension studs. (Optional) 2 pair optional M5x32 extension studs, up to 6.4 cm extension length available. STEP 4: Install the backing plate. Use two M5x12 screws and washers to secure backing plate on the BODY/STUDS, backing plate slot design allows angle adjustment as well as vertical and horizontal adjustment. STEP 5: Mount your license plate. Mount your license plate on the backing plate with 4 provided M5x12 screws.WPS 文字