Evenflo CS300212380

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Evenflo EveryFit/All4One 3-in-1 Convertible Car Seat User Manual

Model: CS300212380

1. Introduction

Thank you for choosing the Evenflo EveryFit/All4One 3-in-1 Convertible Car Seat. This manual provides essential information for the proper installation, use, and maintenance of your car seat, ensuring the safety and comfort of your child. Please read all instructions carefully before use and keep this manual for future reference.

Evenflo EveryFit/All4One 3-in-1 Convertible Car Seat in Augusta Pink

Figure 1: Evenflo EveryFit/All4One 3-in-1 Convertible Car Seat (Augusta Pink)

2. Safety Information

Your Evenflo EveryFit/All4One car seat is designed with your child's safety as the top priority. It meets or exceeds all applicable Federal Safety Standards. The seat has been structurally integrity tested at energy levels approximately 2X the federal frontal crash test standard, and it is side-impact tested, rollover tested, and temperature tested.

WARNING: Always follow all instructions and warnings provided in this manual and on the car seat labels. Improper use can lead to serious injury or death.

3. Setup and Installation

3.1 Car Seat Modes

  • Rear-Facing with Harness: For children weighing 4 - 40 lb.
  • Forward-Facing with Harness: For children weighing 22 - 65 lb, at least 2 years old.
  • High-Back Booster: For children weighing 40 - 120 lb, at least 4 years old.

3.2 Installation Methods

The car seat can be installed using either the vehicle's LATCH system or the vehicle's seat belt. The Quick Connector LATCH and belt guides are designed for easy and tight installation.

Evenflo EveryFit/All4One car seat showing recline positions

Figure 2: Car seat recline positions for optimal fit.

3.3 Recline Positions

The car seat features 12 reclining positions to ensure proper angle and comfort for your child in both rear-facing and forward-facing modes. Adjust the recline based on your child's weight and the vehicle's seat angle indicators.

4. Operating Instructions

4.1 Harness and Headrest Adjustment

The one-hand, 12-position headrest and easy-to-slide no-rethread harness straps allow for quick and proper fit adjustments as your child grows, without the need to uninstall the car seat.

Evenflo EveryFit/All4One car seat headrest and harness adjustment

Figure 3: Adjusting the headrest and harness for a proper fit.

4.2 Convenience Features

  • Integrated Cup Holders: Dual integrated cup holders are provided for drinks.
  • Removable Snack Tray: A removable snack tray can be inserted into the cup holders to keep snacks within your child's reach.
Evenflo EveryFit/All4One car seat with removable cup holder and snack tray

Figure 4: Removable cup holder and optional snack tray.

5. Maintenance and Cleaning

Keeping your car seat clean is essential for hygiene and longevity. All fabrics are machine-washable for easy cleaning.

5.1 Fabric Care

  • Machine wash the seat pad separately in cold water, delicate cycle.
  • Tumble dry for 10 to 15 minutes on low heat.
  • Do not lubricate or immerse in water any part of this child restraint, unless rinsing is permitted.

5.2 Hard Parts Cleaning

  • Plastic and metal parts may be wiped clean with mild soap and water and dried with a soft cloth.
  • The harness can be wiped clean with mild soap and water. Allow harness to air dry.
Evenflo EveryFit/All4One car seat with removable cushions for cleaning

Figure 5: Removable cushions for easy cleaning.

6. Troubleshooting

If you encounter any issues with your Evenflo EveryFit/All4One car seat, please refer to the following common troubleshooting tips:

  • Harness Difficulty: If the harness is difficult to tighten or loosen, ensure no fabric or debris is obstructing the harness path or the adjustment mechanism. Check the harness straps for twists.
  • Loose Installation: Ensure the LATCH connectors or seat belt are properly routed and tightened according to the installation instructions for your chosen mode. Apply firm pressure to the car seat while tightening to remove slack.
  • Child Discomfort: Verify that the headrest and harness are adjusted to the correct height for your child's shoulders. Ensure all removable cushions are correctly positioned for their size and stage.

For further assistance, please contact Evenflo Customer Service.

7. Specifications

FeatureDetail
Product Dimensions22.25 x 19 x 32.5 inches
Item Model NumberCS300212380
Minimum Weight Recommendation4 Pounds
Maximum Weight Recommendation120 Pounds
Minimum Height Recommendation17 Inches
Maximum Height Recommendation57 Inches
Material TypePolyester
Material Composition90% Plastic, 8% Metal, 2% Polyester
Number of Reclining Positions12
Harness Type5-Point
Item Weight19 pounds
Country/Region of OriginUSA
Evenflo EveryFit/All4One car seat with dimensions labeled

Figure 6: Product dimensions.

8. Warranty and Support

Evenflo products are designed for durability and longevity. While specific warranty details are not provided in this manual, Evenflo offers protection plans for extended coverage. For any product support, warranty claims, or inquiries, please contact Evenflo Customer Service directly.

You can visit the official Evenflo website or refer to the contact information provided with your product packaging for the most up-to-date support details.

Families have trusted Evenflo for more than 100 years for smart, innovative gear designed to make life easier, safer, and more comfortable at home and on the go.

© 2025 Evenflo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.