1. Introduction
Thank you for choosing the JvKzaen Stylus Pen AX10-T. This stylus is designed to enhance your iPad experience with features like palm rejection, tilt sensitivity, and fast charging. Please read this manual carefully to ensure proper use and optimal performance of your device.
2. Compatibility
The JvKzaen Stylus Pen AX10-T is compatible with a wide range of iPad models released in 2018 and later. Please verify your iPad model number before use to ensure compatibility.
Compatible iPad Models:
- iPad (6th, 7th, 8th, 9th, 10th, 11th Gen)
- iPad Air (3rd, 4th, 5th Gen, M2/M3)
- iPad Pro 11-inch (1st, 2nd, 3rd, 4th Gen, M4)
- iPad Pro 12.9-inch (3rd, 4th, 5th, 6th Gen)
- iPad Pro 13-inch (M4)
- iPad Mini (5th, 6th Gen)
Incompatible Devices:
- iPad Mini (1st, 2nd, 3rd, 4th, 7th A17 Pro)
- iPad Air (1st, 2nd)
- iPad Pro 10.5-inch, iPad Pro 9.7-inch
- iPad (1st, 2nd, 3rd, 4th, 5th)
- iPad Pro 12.9-inch (1st, 2nd)
- iPhone, Android devices, Surface, Chromebook, Kobo devices
3. Setup and Charging
3.1 Initial Charge
Before first use, fully charge your stylus pen. The pen features a hidden Type-C charging port and a one-piece dust plug design to prevent loss.
- Remove the one-piece dust plug from the charging port.
- Insert the provided Type-C charging cable.
- The pen fully charges in approximately 14 minutes, providing up to 10 hours of continuous working time.
3.2 Battery Indicators
The stylus pen is equipped with 3 LED indicators to show the remaining battery life and charging progress:
- 3 lights on: 70-100% power
- 2 lights on: 30-70% power
- 1 light on: 5-30% power (requires charging)
3.3 Power On/Off
- To Power On: Simply touch the top of the stylus pen once.
- To Power Off: Double-click the top of the stylus pen.
- The pen features an automatic shutdown function after 5 minutes of inactivity to conserve power.
3.4 Pencil Holder Installation
The stylus comes with a pencil holder for convenient storage. The holder has strong adhesive for secure placement.
- Peel off the protective backing from the adhesive side of the pencil holder.
- Attach the holder to the back of your iPad case or any desired surface.
- Place your stylus pen into the holder for secure storage.
4. Operating Instructions
4.1 Palm Rejection
The stylus pen features palm rejection technology, allowing you to rest your hand comfortably on the iPad screen while writing or drawing without unintended marks.
4.2 Tilt Sensitivity
The stylus supports tilt sensitivity, enabling you to vary the thickness and depth of your lines by changing the angle at which you hold the pen. This is ideal for shading and artistic effects.
4.3 Precision and Smoothness
Equipped with a 0.9mm upgraded POM tip, the stylus offers high precision and a smooth writing experience with no lagging, skips, or scratches. It provides a natural feel similar to a traditional pencil.
4.4 Magnetic Adsorption
The stylus pen features a magnetic design, allowing it to attach securely to compatible iPads (only for iPads with magnetic support) for convenient storage and quick access.
4.5 General Usage
The stylus is suitable for various tasks including writing, sketching, playing games, and detailed drawing.
5. Maintenance
- Keep the stylus clean by wiping it with a soft, dry cloth.
- Avoid dropping the pen or exposing it to extreme temperatures.
- The stylus uses replaceable nibs. If the tip becomes worn or damaged, replace it with a new one.
6. Troubleshooting
6.1 Stylus Not Responding
- Ensure the stylus is powered on (single touch on top).
- Check the battery level using the LED indicators and charge if necessary.
- Ensure your iPad's Bluetooth is enabled, even though direct pairing is not required for basic functionality, some features might benefit.
- Restart your iPad and the stylus.
6.2 Tip Issues (Loose or Broken)
If the stylus tip becomes loose or breaks, it needs to be replaced. The stylus comes with replacement tips.
- Gently pull the old tip straight out from the stylus.
- Align the new tip with the stylus and push it firmly until it is securely in place. Do not twist.
Note: Some users have reported difficulty with tip replacement if not done carefully. Ensure the tip is pushed straight in without forcing or twisting.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | AX10-T |
| Product Dimensions | 0.39 x 0.39 x 5.91 inches |
| Item Weight | 0.47 ounces |
| Material | Aluminum |
| Battery Type | 1 Lithium Ion (included) |
| Charging Time | Approx. 14 minutes |
| Working Time | Up to 10 hours |
| Auto Shutdown | After 5 minutes of inactivity |
| Tip Size | 0.9mm POM |