Introduction
Welcome to the HyperGear SB51a 5.1 Surround Sound System. This manual provides essential information for the proper setup, operation, and maintenance of your new home theater audio system. Please read this manual thoroughly before use and retain it for future reference.
Important Safety Information
- Read all instructions carefully before operating the product.
- Do not expose this appliance to dripping or splashing liquids. Do not place objects filled with liquids, such as vases, on the apparatus.
- Ensure proper ventilation. Do not block any ventilation openings.
- Use only attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The product should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
Package Contents
Please verify that all the following components are included in your package:
- 38-inch Ultrawide Quad-Driver Soundbar
- 5.25-inch Front-Firing Subwoofer
- Dual Wired Satellite Speakers
- Full-Function Remote Control
- Wall-Mounting Hardware
- Power Adapter
- User Manual
Image: The HyperGear SB51a 5.1 Surround Sound System, including the soundbar, subwoofer, two satellite speakers, and remote control, shown with its retail packaging.
Setup Guide
1. Placement
Optimal placement of your sound system components is crucial for the best audio experience.
- Soundbar: Place the soundbar centrally below your television. Its slim design allows for placement on a TV stand or wall-mounting using the included hardware.
- Subwoofer: The 5.25-inch front-firing subwoofer delivers deep bass. For optimal performance, place it on the floor, ideally in a corner or near a wall to enhance bass response.
- Satellite Speakers: Position the dual wired satellite speakers to the left and right of your listening area. For a true surround sound experience, place them slightly behind or to the sides of your main seating position. The system offers front and rear surround setup flexibility.
Image: Diagram showing the dimensions of the soundbar (38.2 x 3.5 x 2.5 inches, 4.4 lbs), subwoofer (11 x 6.3 x 10.4 inches, 6.8 lbs), and satellite speakers (2.5 x 3.5 x 6.5 inches, 0.9 lbs each).
Image: A living room setup demonstrating the placement of the soundbar below a TV, the subwoofer, and satellite speakers for a cinematic surround sound experience.
2. Connections
Connect your audio sources to the soundbar using the available input options.
- HDMI ARC: For the best audio quality and control, connect an HDMI cable from the HDMI ARC port on your TV to the HDMI ARC port on the soundbar. This allows your TV remote to control the soundbar's volume.
- Digital Optical: Connect an optical cable from your TV's optical output to the soundbar's optical input.
- Wired Satellite Speakers: Connect the wired satellite speakers to the designated ports on the subwoofer. Ensure a secure connection for each speaker.
Image: Visual representation of the HyperGear SB51a's connectivity options, highlighting HDMI ARC, Digital Optical Inputs, and Bluetooth 5.0 wireless streaming.
3. Power On
After all connections are made:
- Connect the power adapter to the soundbar and then to a wall outlet.
- Press the Power button on the soundbar or the remote control to turn on the system.
Operating Your System
Remote Control
The included full-function remote control allows you to manage all aspects of your sound system, including power, volume, input selection, and EQ modes.
Input Selection
Press the 'Input' button on the remote control or soundbar to cycle through available input sources: HDMI ARC, Optical, and Bluetooth.
Bluetooth Pairing
To connect a Bluetooth device:
- Switch the soundbar to Bluetooth mode using the 'Input' button. The indicator light will flash.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select 'HyperGear SB51a' from the list. Once connected, the indicator light will become solid.
EQ Modes
The HyperGear SB51a features three expert-tuned EQ modes to optimize your audio experience:
- VoiceBoost: Clarifies dialogue, making conversations easier to understand. Ideal for movies and TV shows.
- BassBoost: Enhances deep bass frequencies for powerful sound effects and music.
- StudioBoost: Provides a balanced audio experience, suitable for a wide range of content.
Use the dedicated EQ buttons on the remote control to switch between these modes.
Image: The HyperGear SB51a system components, emphasizing its optimization for 4K and 8K UHD TVs and the availability of three expert-tuned EQ modes.
Care and Maintenance
- Cleaning: Use a soft, dry cloth to clean the surfaces of the soundbar, subwoofer, and satellite speakers. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, store the system in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ventilation: Ensure that the ventilation openings are not blocked to prevent overheating.
Troubleshooting
If you encounter issues with your HyperGear SB51a system, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected or outlet not active. | Ensure the power cable is securely connected to the soundbar and a working power outlet. |
| No sound | Incorrect input selected, volume too low, or cables loose. | Verify the correct input source is selected. Increase the volume. Check all audio cables for secure connections. |
| Bluetooth not connecting | Soundbar not in pairing mode or device too far. | Ensure the soundbar is in Bluetooth pairing mode. Move your device closer to the soundbar (within 10 meters). Try unpairing and re-pairing the device. |
| Remote control not working | Dead batteries or obstruction. | Replace the batteries in the remote control. Ensure there is no obstruction between the remote and the soundbar. |
| Distorted sound | Volume too high, poor source quality, or incorrect EQ mode. | Lower the volume. Check the audio source quality. Experiment with different EQ modes. |
Technical Specifications
| Feature | Specification |
|---|---|
| Model Name | SB51a |
| Speaker Type | Surround Sound |
| Surround Sound Channel Configuration | 5.1 |
| Speaker Maximum Output Power | 90 Watts |
| Frequency Response | 50 Hz |
| Subwoofer Diameter | 5.25 Inches |
| Connectivity Technology | Bluetooth |
| Wireless Communication Technology | Bluetooth |
| Bluetooth Range | 10 Meters (33 Feet) |
| Compatible Devices | Home Theater, Projector, Television |
| Control Method | Remote |
| Mounting Type | Wall Mount |
| Power Source | Corded Electric |
| Item Weight | 15.12 pounds |
| Package Dimensions | 40 x 15.5 x 8 inches |
| UPC | 633755159510 |
Warranty Information
The HyperGear SB51a 5.1 Surround Sound System comes with a limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included in your product packaging or visit the official HyperGear website.
Customer Support
For further assistance, technical support, or inquiries about your HyperGear SB51a system, please visit the official HyperGear website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's website.
