NARWAL Floor Cleaner for Freo | Freo X Ultra Robot Vacuums - Instruction Manual

Introduction

This instruction manual provides essential information for the proper use and maintenance of your NARWAL Specially Formulated Floor Cleaner. This cleaner is designed for optimal performance with NARWAL Freo and Freo X Ultra Robot Vacuum and Mop models, ensuring effective cleaning results.

Compatibility

This floor cleaner is specifically formulated for use with the following NARWAL robot vacuum and mop models:

• NARWAL Freo
• NARWAL Freo X Ultra

Please ensure your robot model matches one of the listed compatible devices before use.

Setup and Installation

Follow these steps to properly install the floor cleaner bottle into your NARWAL base station:

1. Locate the designated slot for the floor cleaner bottle on your robot's base station.
2. Invert the floor cleaner bottle.
3. Slide the inverted bottle into the designated slot. The orientation of the bottle does not affect its function.

Image: NARWAL Floor Cleaner bottle. The bottle is designed to be inverted and placed into the base station's designated slot for automatic dispensing.

Important Caution:

The seal on the floor cleaner bottle is intended for one-time use and automatic piercing by the base station. Do not attempt to open it forcefully, as this may lead to leaks or potential damage to the base station's dispensing mechanism.

Operating Instructions

Once the floor cleaner bottle is correctly installed, your NARWAL Freo or Freo X Ultra robot vacuum and mop will automatically dispense the appropriate amount of cleaning solution during its mopping cycles. Refer to your robot's main instruction manual for detailed operating procedures, cleaning modes, and scheduling.

Storage

To maintain the quality and effectiveness of the floor cleaner, store the product in a cool, shaded area. Ensure the bottle remains sealed until its first use in the base station.

Troubleshooting

If you encounter issues with the floor cleaner, such as improper dispensing or leaks, first verify that the bottle is correctly seated in the base station and that the seal has not been tampered with manually. For further assistance, consult the troubleshooting section of your NARWAL robot vacuum's main user manual or contact customer support.

Specifications

Warranty and Support

For information regarding product warranty, please refer to the documentation included with your NARWAL robot vacuum and mop, or visit the official NARWAL website. For technical support or inquiries, please contact NARWAL customer service through their official channels.

Official NARWAL Website: www.narwal.com