XpertMatic 7-in-1 Multi-Parameter Water Tester User Manual

Product Overview

The XpertMatic 7-in-1 Multi-Parameter Water Tester is a versatile device designed for precise measurement of various water quality parameters. It accurately measures pH, Total Dissolved Solids (TDS), Electrical Conductivity (EC), Salinity (SALT), Temperature (TEMP), Specific Gravity (S.G), and Oxidation-Reduction Potential (ORP). This compact and portable meter is suitable for a wide range of applications, including pools, hydroponics, aquariums, domestic water, aquaculture, and the catering food industry.

Figure 1: The XpertMatic 7-in-1 Multi-Parameter Water Tester shown with its accompanying smartphone application, demonstrating its use in an aquarium setting. The device measures multiple water parameters simultaneously.

Figure 2: This diagram highlights the seven key parameters measured by the device: pH (0.00-14.00pH), TDS (0-19900ppm, 0-199.0ppt), EC (0-19900us/cm, 0-199.0ms/cm), Temperature (0-50°C / 32-122°F), ORP (-2000mV to +2000mV), Salt (0-199.0ppt, 0%-20%), and Specific Gravity (0.990-1.400).

Figure 3: The versatility of the meter is demonstrated across multiple environments, from household water to large-scale aquaculture and industrial catering.

Package Contents

Upon opening the package, verify that all components are present and undamaged. The standard package includes:

• XpertMatic 7-in-1 Multi-Parameter Water Tester (PH Meter)

Note: Calibration solutions and other accessories may be sold separately or included depending on the specific product variant. Refer to your product packaging for exact contents.

Setup and Initial Use

1. Battery Installation

The device is powered by a built-in button cell battery. Ensure the battery is properly seated and the compartment is securely closed before use.

Figure 4: The meter features a backlit LCD for clear readings and a built-in button cell battery, accessible at the top of the device.

2. Powering On/Off

Press the MODE button to power on the device. The digital LED display will illuminate. To power off, press and hold the MODE button. The meter also features intelligent power management, automatically powering off after 8 minutes of inactivity to conserve energy. When connected via Bluetooth, it remains active indefinitely.

3. Bluetooth App Connection

To utilize the Bluetooth App control features:

1. Download the official XpertMatic application from your device's app store.
2. Ensure Bluetooth is enabled on your smartphone or tablet.
3. Open the XpertMatic app and follow the on-screen instructions to pair with your water tester.
4. Once connected, you can view real-time data, set alarms, and export measurement history.

Figure 5: The Bluetooth application provides a comprehensive interface for monitoring and managing measurement data, including options to download and share results via email or social media platforms.

Operating Instructions

1. Calibration

For accurate readings, regular calibration is essential. Refer to the specific calibration instructions provided with your calibration solutions. Generally, this involves:

1. Prepare standard calibration solutions (e.g., pH 4.00, pH 6.86, pH 9.18).
2. Rinse the electrode with distilled water and blot dry.
3. Immerse the electrode into the first calibration solution.
4. Press the CAL/TEMP button and follow the on-screen prompts or app instructions to calibrate.
5. Repeat for other calibration points as necessary.

Important: Ensure the electrode is fully submerged in the solution during calibration and measurement. Inaccurate calibration can lead to incorrect readings.

2. Taking Measurements

To measure water parameters:

1. Ensure the meter is clean and calibrated.
2. Gently immerse the electrode into the water sample, ensuring the sensor is fully submerged.
3. Allow 2-5 seconds for the reading to stabilize on the digital display or in the connected app.
4. Press the MODE button to cycle through different measurement parameters (pH, TDS, EC, SALT, TEMP, S.G, ORP).
5. Record the readings as needed.

Figure 6: The portable design allows for easy use in various environments, from large bodies of water like swimming pools to smaller samples in a glass.

Figure 7: The advanced sensor design ensures high accuracy (±0.03 pH) and rapid measurement response times, providing quick and reliable results.

Maintenance

1. Electrode Cleaning

After each use, rinse the electrode thoroughly with distilled or deionized water to prevent contamination and buildup. Do not wipe the electrode as this can damage the sensitive glass bulb. Gently blot dry with a lint-free tissue.

2. Storage

Store the meter with the electrode cap securely in place. If the electrode cap contains a sponge, keep it moist with a few drops of storage solution or pH 4.00 buffer solution. Never store the electrode dry or in distilled water, as this can shorten its lifespan.

3. Battery Replacement

When the display indicates low battery, replace the button cell battery according to the instructions in the battery compartment. Ensure correct polarity.

Troubleshooting

Specifications

• Model: B0CQ4LDH6W
• Brand: XpertMatic
• Functions: pH, TDS, EC, SALT, TEMP, S.G, ORP
• pH Range: 0.00-14.00pH
• TDS Range: 0-19900ppm, 0-199.0ppt
• EC Range: 0-19900us/cm, 0-199.0ms/cm
• Temperature Range: 0-50°C (32-122°F)
• ORP Range: -2000mV to +2000mV
• Salt Range: 0-199.0ppt, 0%-20%
• Specific Gravity (S.G) Range: 0.990-1.400
• pH Accuracy: ±0.03
• Response Time: 2-5 seconds (average)
• Power Management: Automatic shut-off after 8 minutes of inactivity (unless connected via Bluetooth)
• Connectivity: Bluetooth App Control
• Package Dimensions: 10.08 x 3.86 x 2.36 inches
• Weight: 7.76 ounces
• Manufacturer: XpertMatic

Warranty and Support

For warranty information and technical support, please refer to the official XpertMatic website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: XpertMatic

ASIN: B0CQ4LDH6W

For further assistance, visit the XpertMatic Store on Amazon.