1. Introduction
This manual provides detailed instructions for the proper installation and care of your Lamshaw TPU Screen Protector. Designed for the YOUSOKU H97 Pro Kids Smart Watch and MgaoLo 1.5 Inches H97 Pro Kids Smart Watch, this protector offers full coverage and enhanced screen durability. Please ensure your watch model matches the compatible devices listed before proceeding with installation.
2. Package Contents
Verify that all items are present in your package:
- 6 x TPU Screen Protectors
- 1 x Squeegee Card
- 1 x Microfiber Cloth
- 3 x Alcohol Cleaning Wipes (Wet & Dry)
Image: Contents of the Lamshaw TPU Screen Protector package.
3. Compatibility
This screen protector is specifically designed for:
- YOUSOKU H97 Pro Kids Smart Watch
- MgaoLo 1.5 Inches H97 Pro Kids Smart Watch
Please verify your watch model number before installation to ensure a perfect fit.
4. Setup and Preparation
Before beginning the installation, ensure you are in a clean, dust-free environment. Wash your hands thoroughly to avoid transferring oils or dust to the screen.
4.1. Clean the Watch Screen
- Use the provided alcohol wet wipe (labeled '1') to thoroughly clean the watch screen surface.
- Immediately follow with the dry wipe (labeled '2') to remove any moisture or streaks.
- Use the microfiber cloth to polish the screen, ensuring no dust or smudges remain.
- Utilize the 'Dust-absorber' sticker to gently dab the screen and lift any remaining dust particles. This step is crucial to prevent bubbles.
5. Installation Guide
Follow these steps carefully for optimal application of the screen protector:
- Prepare the Protector: The protector has three layers. Carefully peel off the red 'Back 1' layer. This exposes the adhesive side that will attach to your watch screen.
- Align and Apply: Gently align the screen protector with the watch screen. Start from one edge and slowly lower it onto the screen, ensuring accurate placement.
- Remove Bubbles: Use the provided squeegee card to push out any air bubbles. Start from the center of the screen and push outwards towards the edges. If a large bubble persists, you may need to carefully lift a corner of the protector and reapply, pushing the bubble out as you lay it back down.
- Remove Top Layer: Once the protector is smoothly applied, peel off the black 'Front 2' layer. The middle layer is the actual screen protector.
- Final Touches: Press down firmly on the edges of the screen protector with your finger to ensure a secure seal.
5.1. Visual Installation Aid
Image: Diagram illustrating the four main steps for applying the screen protector.
5.2. Installation Video
Video: A detailed demonstration of the TPU screen protector installation process.
Video: Another visual guide showcasing the film installation process for the screen protector.
6. Product Features
- Full Coverage: Designed to cover the entire screen of your compatible smartwatch.
- Bubble Self-Healing: Minor scratches and small bubbles typically disappear within 24 hours due to the self-healing properties of the TPU material.
- Anti-Shatter & Anti-Scratch: Provides robust protection against impacts and scratches.
- High Transparency & Sensitivity: Maintains original screen clarity and touch responsiveness.
Image: Illustration of the screen protector's automatic repair capability.
Image: Demonstrates full coverage, precise cutting, and seamless fit.
Image: Illustrates the ultra-thin design preserving 100% touch sensitivity.
Image: The flexible TPU material resists damage, providing robust protection.
7. Maintenance
To maintain the clarity and effectiveness of your screen protector:
- Clean the screen protector regularly with a soft, lint-free cloth.
- Avoid using harsh chemicals or abrasive materials, as these can damage the protector's surface.
- If the protector becomes heavily scratched or damaged, replace it with a new one from the pack.
8. Troubleshooting
8.1. Persistent Bubbles
If bubbles remain after installation, especially large ones:
- For small bubbles, wait 24 hours. The self-healing properties of the TPU material may cause them to disappear naturally.
- For larger bubbles, carefully lift the nearest edge of the screen protector using a fingernail or the edge of the squeegee card. Realign and slowly reapply the protector, pushing the air out with the squeegee as you go.
- Ensure the screen is completely free of dust before reapplication.
8.2. Adhesion Issues
If the protector does not adhere properly:
- Ensure the correct side of the protector is applied to the screen. The middle layer is the adhesive one.
- Make sure the screen is clean and dry before application. Any moisture or residue can prevent proper adhesion.
9. Specifications
- Material: Thermoplastic Polyurethane (TPU)
- Item Hardness: 6H
- Finish Type: Clear
- Special Feature: Anti-Shatter
- Unit Count: 6.0 Count
- Product Dimensions: 0.5"L x 0.5"W (Note: These dimensions are for the packaging/item weight, not the protector itself. The protector is custom-fit for 1.5-inch screens.)
Image: Breakdown of the screen protector's layered composition.
10. Warranty and Support
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Lamshaw website. Keep your purchase receipt for any warranty claims.