1. Setup
Before first use, ensure all packaging materials are removed from the robot and the multifunctional dock. Place the dock on a hard, flat surface against a wall with adequate clearance around it.
Figure 1: Roborock Qrevo Pro and Multifunctional Dock
1.1 App Setup
Download the official Roborock app from your device's app store. Follow the in-app instructions to connect your robot vacuum to your 2.4G WiFi network. The app allows for comprehensive control and customization of cleaning tasks.
Video 1: Roborock Qrevo Pro App Setup Guide
1.2 Initial Mapping
For optimal performance, allow the robot to complete an initial mapping run of your home. This creates a detailed map within the app, enabling features like zone cleaning, room cleaning, and no-go zones.
Video 2: Roborock Qrevo Pro Map Settings Overview
2. Operating Instructions
2.1 Cleaning Modes
The Roborock Qrevo Pro offers various cleaning modes accessible via the app:
- Full Clean: Cleans the entire mapped area.
- Room Clean: Select specific rooms for cleaning.
- Zone Clean: Define custom zones for targeted cleaning.
- Routine: Set up personalized cleaning schedules and sequences.
2.2 Key Features
- FlexiArm Design Edge Mopping System: The mop extends to reach edges and corners, ensuring comprehensive cleaning with 98.8% edge coverage.
Figure 2: FlexiArm Design in action, reaching close to edges.
- 7,000 Pa HyperForce Suction: Provides powerful suction to effectively lift dirt, dust, and debris from various surfaces.
Figure 3: Visual representation of the powerful 7,000 Pa suction.
- Intelligent Dirt Detection: The robot detects dirty water during mop washing and re-washes mops or targets specific dirty areas for enhanced cleaning.
Figure 4: Intelligent Dirt Detection system for thorough cleaning.
- 10mm Mop Lifting: The mop pads automatically lift by 10mm when transitioning onto carpets, preventing wetting and cross-contamination.
Figure 5: Mop lifting mechanism for carpet protection.
- Reactive Tech Obstacle Avoidance: The robot anticipates and navigates around obstacles, reducing the need for pre-cleaning floor preparation.
Figure 6: Robot navigating around obstacles using Reactive Tech.
- PreciSense LiDAR Navigation: Creates detailed and accurate maps of your home for efficient and precise cleaning routes.
Figure 7: LiDAR navigation system for accurate home mapping.
3. Maintenance
Regular maintenance ensures optimal performance and longevity of your Roborock Qrevo Pro.
3.1 Automatic Maintenance
- Hot Water Auto Mop Washing: The dock uses 140°F hot water to wash the mop pads, removing stubborn stains and sanitizing them.
- Auto Mop Drying: After washing, the mop pads are quickly and thoroughly dried to prevent odors and mildew.
Figure 8: Dock's automatic mop washing and drying process.
- Auto Dust Emptying: The robot automatically empties its dustbin into a sealed bag in the dock, providing up to 7 weeks of hands-free dust disposal.
- Auto Tank Refilling: The robot's water tank is automatically refilled from the dock, ensuring continuous mopping without manual intervention.
Figure 9: Dock's automatic dust emptying and water tank refilling.
3.2 Manual Maintenance
Periodically check and clean the following components:
- Main Brush: Remove hair and debris.
- Side Brush: Ensure it's free from tangles.
- Filters: Clean or replace as recommended in the user manual.
- Sensors: Wipe clean with a dry cloth.
- Water Tanks (Dock): Empty and clean the dirty water tank regularly. Refill the clean water tank as needed.
4. Troubleshooting
If you encounter issues with your Roborock Qrevo Pro, refer to the following common solutions:
- Robot not charging: Ensure the robot is correctly docked and the power cable is securely connected to the dock and power outlet.
- Robot stuck or lost: Clear any obstacles around the robot. Check the app for its location and manually reposition if necessary. Ensure the mapping is complete and accurate.
- Poor cleaning performance: Clean the main brush, side brush, and filters. Check water levels in the clean tank and ensure mop pads are properly attached and clean.
- App connectivity issues: Ensure your robot and smartphone are within range of your 2.4G WiFi network. Restart the robot and your router if problems persist.
- Unusual noises: Check for any foreign objects caught in the brushes or wheels. If the noise persists, contact customer support.
5. Specifications
| Feature | Specification |
|---|---|
| Brand | roborock |
| Model Name | roborock Qrevo Pro |
| Special Features | FlexiArm Design Edge Mopping System, 7,000 Pa HyperForce Suction, Auto Mop Drying/Auto Dust Emptying/Auto Tank Refilling, Easy-to-Use App and Third-Party Voice Control, Reactive Tech Obstacle Avoidance and PreciSense LiDAR Navigation, Hot Water Auto Mop Washing and Intelligent Dirt Detection |
| Color | White |
| Product Dimensions | 19.2"L x 13.4"W x 20.5"H |
| Included Components | Multifunctional Dock (1), Dock Base (1), Power Cable (1), Battery, Robot Vacuum (1) |
| Filter Type | Standard |
| Battery Life | 180 minutes (typical) |
| Battery Capacity | 5200 mAh |
| Dustbin Capacity | Approx. 350 ml (internal) |
| Water Tank Capacity | Approx. 80 ml (internal) |
| Power Source | Battery Powered |
| Control Method | App, Touch, Voice |
| Compatible Devices | Smartphones, Amazon Echo, Tablets, Google Home, Smartwatches |
| Item Weight | 33.9 pounds |
6. Warranty and Support
The roborock Qrevo Pro typically comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. For technical support, troubleshooting assistance, or warranty claims, please visit the official roborock website or contact their customer service.
Each item has a unique code that is verified before shipping, ensuring product authenticity.