AIPER Scuba SE
AIPER Scuba SE Robotic Pool Cleaner User Manual
Model: Scuba SE | Brand: AIPER
1. Introduction
The AIPER Scuba SE is a compact, cordless robotic pool cleaner designed for efficient and hassle-free maintenance of flat-bottom pools. Its hydrodynamic design ensures thorough cleaning, while features like automatic self-parking and quick drainage enhance user convenience. Enjoy a cleaner pool with minimal effort.
Figure 1: The AIPER Scuba SE Robotic Pool Cleaner.
Video 1: Overview of the AIPER Scuba SE Robotic Pool Cleaner in action.
2. Safety Information
Please read all safety instructions carefully before operating the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the charging port is completely dry before connecting the charger.
- Do not operate the cleaner when people or pets are in the pool.
- Use only the original charger provided by AIPER.
- Keep the device out of reach of children.
- Store the cleaner in a cool, dry place when not in use.
- Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
3. Package Contents
Verify that all items are present in the package:
- AIPER Scuba SE Robotic Pool Cleaner
- Power Adapter
- Retrieval Hook
- User Manual
4. Setup
4.1 Charging the Device
Before first use, fully charge the AIPER Scuba SE. The device is powered by a Lithium-Ion battery, providing up to 90 minutes of cleaning time on a full charge.
- Locate the charging port on the device. Ensure it is clean and dry.
- Connect the power adapter to the charging port.
- Plug the power adapter into a wall outlet.
- The LED indicator on the charger will show the charging status. It typically takes 3 hours for a full charge.
Figure 2: Connect the charger to the device and a power outlet. The LED indicates charging status.
5. Operation
5.1 One-Click Activation
The AIPER Scuba SE features simple one-click activation for immediate cleaning.
- Ensure the device is fully charged.
- Press the power button located on the underside of the cleaner to activate it.
- Gently submerge the cleaner into the pool. It will begin its cleaning cycle automatically.
Figure 3: The cordless design and one-click activation make the Scuba SE easy to use.
5.2 Cleaning Process
The Scuba SE utilizes a new hydrodynamic design and dual bottom brushes for efficient cleaning of flat-bottom pools up to 80 m² (860 sq. ft.). It effectively picks up debris and filters the water.
Figure 4: The hydrodynamic design allows the cleaner to glide efficiently, focusing energy on cleaning.
Video 2: Demonstrates the cleaning capabilities and hydrodynamic movement of the Scuba SE.
5.3 Automatic Self-Parking
When the battery is low, the Scuba SE will automatically park near the edge of your pool for easy retrieval, preventing you from getting wet.
Figure 5: The automatic parking feature ensures effortless retrieval of the cleaner.
5.4 Retrieval
Use the provided retrieval hook to easily lift the cleaner from the pool once its cleaning cycle is complete or it has self-parked.
- Attach the retrieval hook to a standard pool pole (not included).
- Hook the cleaner's handle and gently lift it out of the water.
6. Maintenance
6.1 Quick Drainage
The Scuba SE features an advanced water drainage system that allows up to 80% of stored water to be released in just 15 seconds, making it lighter and easier to handle after use.
Figure 6: The quick drainage system facilitates easy removal from the pool.
6.2 Filter Cleaning
Regular cleaning of the filter is essential for optimal performance.
- Open the cleaner's cover to access the filter basket.
- Remove the filter basket.
- Empty any collected debris.
- Rinse the filter basket thoroughly with a hose until clean.
- Reinsert the clean filter basket and close the cover securely.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cleaner does not turn on. | Low battery; Power button not pressed correctly. | Charge the device fully; Ensure the power button is pressed firmly. |
| Cleaner stops mid-cycle. | Low battery; Impeller blocked; Excessive debris in filter. | Recharge the device; Check for and remove any blockages from the impeller; Clean the filter basket. |
| Poor cleaning performance. | Full or dirty filter; Impeller blocked; Device not suitable for pool type (e.g., sloped bottom). | Clean the filter basket; Clear any impeller blockages; Ensure pool is flat-bottomed as specified. |
| Cleaner does not self-park at edge. | Obstructions in pool; Sensor interference. | Remove any large objects from the pool; Ensure clear path to pool edge. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | Scuba SE |
| Power Source | Battery Powered |
| Battery Type | Lithium-Ion (1 battery required, included) |
| Battery Energy Content | 28.08 Watt-hours |
| Item Weight | 3.4 Kilograms |
| Product Dimensions | 20.32 x 30.48 x 40.64 cm (34.3L x 28W x 17H cm) |
| Special Features | Cordless, Ultra-portability |
| Control Method | Touch |
| Material Type | Plastic |
| Capacity | 2 Liters |
| Cleaning Time | Up to 90 minutes |
| Max Pool Area | Up to 80 m² (860 sq. ft.) |
9. Warranty and Support
The AIPER Scuba SE comes with a 2-year warranty. For any questions, technical support, or warranty claims, please contact AIPER customer service. You can find contact information on the official AIPER website or through your purchase platform.
- Warranty Type: Limited
- Return Policy: 30 days (refund/replacement)
- Customer Service: Available 24/7
- EU Repair Center: For quick reaction and solution
For more information, visit the AIPER Store.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







