1. Introduction
This manual provides essential information for the safe and effective use of your onerbl AC/DC Adapter. This adapter is designed as a high-quality replacement power supply for Pulsar PPS200 and PPS500 Portable Power Stations. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Information
To ensure safe operation and prevent damage, observe the following precautions:
- Use the adapter only with compatible devices, specifically Pulsar PPS200 and PPS500 Portable Power Stations.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not disassemble or modify the adapter. Unauthorized modifications can lead to electric shock, fire, or damage to the device.
- Ensure proper ventilation around the adapter during use to prevent overheating.
- Unplug the adapter from the power outlet when not in use or during electrical storms.
- This adapter features built-in protections against over-voltage, over-current, and short-circuit conditions to safeguard your devices.
Image: The adapter incorporates a smart chip for multiple safety protections, including short-circuit, over-voltage, and over-current protection, indicated by respective icons.
3. Package Contents
Verify that all items are present in your package:
- 1 x onerbl AC/DC Adapter
- 1 x AC Power Cord (for wall outlet connection)
Image: The onerbl AC/DC Adapter unit with its attached DC output cable and a separate AC input power cord.
Image: A coiled AC power cord with a two-prong plug on one end and a C7 connector on the other, designed to connect the adapter to a wall outlet.
4. Specifications
| Feature | Detail |
|---|---|
| Input Voltage | AC 100-240V, 50/60Hz (Worldwide Compatible) |
| Output Power | Compatible with 200W and 500W Pulsar Power Stations |
| Cable Length (Total) | Approximately 127.8 inches (324.6 cm) |
| Adapter Dimensions (Approx.) | 4.2 inches (length) x 1.8 inches (width) x 1.2 inches (height) |
| Protection Features | Over Voltage Protection, Over Heat Protection, Short-Circuit Protection, Over-Current Protection |
| Manufacturer | Shenzhen Waweis Technology Co., Ltd |
Image: Detailed diagram showing the dimensions of the adapter unit (4.2 x 1.8 x 1.2 inches) and the lengths of its connected cables, totaling approximately 127.8 inches.
Image: Illustration highlighting the durable design of the cable, featuring copper wire conductors and a protective PVC jacket for enhanced longevity and safety.
5. Setup and Connection
- Connect the AC Power Cord: Insert the C7 connector end of the AC power cord into the corresponding port on the onerbl AC/DC Adapter.
- Connect to Wall Outlet: Plug the two-prong end of the AC power cord into a standard AC 100-240V wall outlet.
- Connect to Power Station: Insert the DC output connector of the adapter into the DC input port of your Pulsar PPS200 or PPS500 Portable Power Station.
- Verify Connection: Ensure all connections are secure. The power station should indicate that it is receiving power or charging.
Image: The onerbl AC/DC Adapter connected to a wall outlet and a portable power station (partially visible), demonstrating a typical setup for charging.
6. Operation
Once properly connected, the onerbl AC/DC Adapter will automatically begin supplying power to your Pulsar Portable Power Station. The adapter is designed for continuous operation within its specified voltage and power limits. Monitor your power station's display for charging status.
7. Maintenance
- Keep the adapter clean and free from dust. Use a dry, soft cloth for cleaning.
- Store the adapter in a cool, dry place when not in use.
- Regularly inspect the cables and connectors for any signs of damage, fraying, or loose connections. If damage is found, discontinue use immediately.
8. Troubleshooting
If you encounter issues with your onerbl AC/DC Adapter, refer to the following common solutions:
- No Power Output:
- Ensure the AC power cord is securely plugged into both the wall outlet and the adapter.
- Verify that the wall outlet is functional by testing it with another device.
- Check if the DC output connector is fully inserted into the power station's input port.
- Adapter Overheating:
- Ensure the adapter is placed in a well-ventilated area, away from direct sunlight or heat sources.
- Do not cover the adapter during operation.
- If overheating persists, discontinue use and contact support.
- Power Station Not Charging:
- Confirm that the power station itself is turned on and ready to receive a charge.
- Refer to your Pulsar Power Station's manual for specific charging indicators and troubleshooting.
9. Warranty and Support
This onerbl AC/DC Adapter comes with a standard manufacturer's warranty. For specific warranty terms, please refer to the product packaging or contact your retailer. For technical support or inquiries, please reach out to the manufacturer, Shenzhen Waweis Technology Co., Ltd, or your point of purchase.