Mama Store Reversible Single Wall Mounted Wooden Cabinet Instruction Manual

Introduction

This manual provides comprehensive instructions for the assembly, installation, operation, and maintenance of your Mama Store Reversible Single Wall Mounted Wooden Cabinet. Please read these instructions carefully before beginning assembly or use to ensure safe and correct installation and to maximize the product's lifespan.

Your cabinet features a modern design with a light concrete finish, a reversible door, and a convenient push & pull opening system, making it a versatile addition to any room.

Important Safety Information

Failure to follow these safety guidelines may result in injury or damage to the product. Keep this manual for future reference.

• The presence of pilot holes with non-linear edges is not a manufacturing defect; they are covered by semi-finished products, hinges, and cover caps during assembly.
• If adhesive residue is present, remove it along the edge of the semi-finished product with a slightly damp cloth.
• Assemble the furniture according to the instructions without forced connections.
• Install the cabinet on horizontal surfaces to prevent tension in connecting areas, which can lead to deformation or failure of closing mechanisms. Defects arising from improper assembly or installation on uneven surfaces are not considered production defects.
• Do not place wet or hot objects directly on the furniture surfaces. Clean any spills immediately with soft, absorbent textile materials.
• Install the furniture in ventilated rooms, away from direct sunlight and water contact. This cabinet is not designed for outdoor use.
• Avoid direct contact of the furniture with water. The cabinet is designed to withstand normal humidity (steam and accidental splashes), but prolonged exposure to high moisture will cause deterioration (swelling) not covered by warranty.
• Place the cabinet at a minimum distance of 30 cm from heat sources.
• Clean grease or liquid traces only with a dry cloth.
• Risk of Tipping: To prevent serious injury or fatality from tipping or falling, it is essential to properly fix the furniture to the wall. The type of attachment (e.g., dowels, hooks, screws) depends on your wall type and thickness. Mounting materials provided are for guidance and must be checked and replaced if necessary to ensure suitability for your specific wall.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Cabinet panels (engineered wood, light concrete finish)
• 2 x Glass shelves (4 mm thick)
• Assembly hardware (screws, dowels, hinges, etc.)
• Instruction manual

Setup and Assembly

Your Mama Store cabinet is delivered as a self-assembly kit. Follow these instructions carefully for a straightforward assembly process.

1. Unpacking and Preparation

Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify all parts against the package contents list.

Figure 1: Overview of cabinet features, highlighting its Italian origin, metal hinges, and engineered wood construction, emphasizing ease of assembly.

2. Cabinet Assembly

Follow the step-by-step diagrams and instructions provided in the included assembly guide. The process is designed to be simple, minimizing the actions required.

1. Connect the main panels using the provided hardware.
2. Install the metal hinges for the door. The door is reversible, allowing it to open to the right or left.
3. Insert the 4 mm glass shelves into the designated slots.
4. Ensure all connections are secure but do not overtighten.

Figure 2: Example of an installation instruction guide, illustrating the assembly process for a Mama Store cabinet.

3. Wall Mounting

This cabinet is designed for wall mounting. Proper installation is critical for safety and stability.

• Select a suitable location on a sturdy, horizontal wall surface.
• Determine the appropriate wall fasteners (e.g., dowels, hooks, screws) for your specific wall type (e.g., drywall, concrete, brick). The mounting materials included are for guidance only and may need to be replaced with suitable alternatives for your wall.
• Mark the drilling points accurately using a level.
• Drill holes and insert the appropriate wall anchors.
• Securely attach the cabinet to the wall, ensuring it is level and stable.

Figure 3: The assembled Mama Store wall cabinet, ready for installation.

Operating Instructions

Push & Pull Opening System

Your cabinet is equipped with a modern push & pull opening system. To open the door, gently press on the door panel. The door will spring open slightly, allowing you to pull it fully open. To close, simply push the door until it latches securely.

Reversible Door

The cabinet door can be configured to open from either the left or the right side during assembly. If you wish to change the door's opening direction after initial assembly, refer to the assembly instructions for hinge re-installation.

Adjustable Glass Shelves

The two 4 mm glass shelves can be adjusted to different heights within the cabinet to accommodate various items. Carefully lift and reposition the shelves into the desired support slots.

Figure 4: Interior view of the cabinet, showcasing the adjustable glass shelves.

Care and Maintenance

Proper care will help maintain the appearance and functionality of your cabinet for years to come.

• Cleaning: The cabinet's linear shapes and materials make it easy to clean. For general cleaning, wipe surfaces with a soft, dry cloth.
• Spills: In case of contact with water or other substances, clean immediately with soft, absorbent textile materials to prevent damage.
• Grease/Liquid Traces: For grease or liquid marks, use only a dry cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
• Environment: Ensure the cabinet is installed in a well-ventilated room, away from direct sunlight and excessive moisture.

Troubleshooting

This section addresses common issues you might encounter.

• Cabinet appears unstable or wobbly:

  Ensure the cabinet is mounted on a perfectly horizontal surface. Uneven surfaces can create tension, leading to instability. Verify that the wall fasteners are appropriate for your wall type and are securely tightened.

• Door does not close properly or is misaligned:

  Check the hinge adjustments. The hinges can be adjusted to ensure proper door alignment and smooth closing. Refer to the assembly instructions for hinge registration. Ensure the cabinet is not under tension from an uneven installation surface.
• Minor imperfections (e.g., small holes, adhesive residue):

  Pilot holes with non-linear edges are part of the design and are covered during assembly. Adhesive residue can be gently removed with a slightly damp cloth. These are not considered manufacturing defects.

• Damage from moisture:

  Damage due to prolonged exposure to high moisture (e.g., swelling) is not covered under warranty. Ensure the cabinet is in a well-ventilated area and avoid direct contact with water.

Specifications

Figure 5: The Mama Store cabinet integrated into a modern bathroom setting.

Warranty and Support

Mama Store products are manufactured with quality and care. Please refer to the specific warranty terms provided with your purchase documentation for details on coverage.

Note that damage resulting from improper assembly, installation on uneven surfaces, or prolonged exposure to high moisture is not covered under warranty.

For further assistance, missing parts, or warranty inquiries, please contact Mama Store customer service:

Email: info@mamastore.it

Website: www.mamastore.it