VINGLI Elizabeth Cast Aluminum Patio Dining Chairs - Instruction Manual

1. Product Overview

The VINGLI Elizabeth Cast Aluminum Dining Chair is a stylish and durable seating option designed for both indoor and outdoor use. Crafted from high-quality cast aluminum, this chair combines elegance with strength. Its sleek design and comfortable seat make it suitable for various settings, from dining areas to poolside, backyard, or balcony use.

Key Features:

• All-weather resistant aluminum construction.
• Antique bronze finish with elegant Elizabeth pattern.
• Ergonomic design with curved armrests and comfortable seating.
• Lightweight and stackable for easy storage.
• Includes cushions for enhanced comfort.

Image 1: A set of VINGLI Elizabeth Cast Aluminum Patio Dining Chairs with cushions, arranged around a dining table on an outdoor patio.

2. Important Safety Information

Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in injury or product damage.

• Ensure stable placement on even surfaces to prevent tipping.
• The maximum weight capacity for each chair is 330 lbs (150 kg). Do not exceed this limit.
• Follow assembly instructions carefully for safe and secure use.
• Keep all small parts and packaging materials away from children.
• Periodically check all bolts and screws to ensure they remain tight.

3. Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Chair Backrest (Elizabeth pattern)
• Chair Seat
• Chair Legs (4 per chair)
• Armrests (2 per chair)
• Cushions (1 per chair)
• Assembly Hardware (screws, washers, Allen wrench)

4. Setup & Assembly

Assembly is straightforward and typically takes about 20 minutes per chair. It is recommended to have two people for easier assembly. Do not fully tighten any screws until all components are loosely assembled.

Step-by-Step Assembly:

1. Attach Legs to Seat: Carefully align each leg with the corresponding attachment points on the underside of the chair seat. Insert the provided screws and washers, tightening them partially (approximately 80%) to allow for adjustment.
2. Attach Backrest: Position the backrest between the rear legs and align the screw holes. Secure with screws and washers, tightening partially.
3. Attach Armrests: Connect the armrests to the front legs and the backrest. Ensure proper alignment and secure with screws and washers, tightening partially.
4. Final Tightening: Once all components are in place and aligned, fully tighten all screws to 100%. Ensure the chair is stable and level.
5. Add Cushions: Place the provided cushions on the chair seat.

Image 2: This diagram illustrates the chair's dimensions: 36.4 inches height, 25.6 inches width, 25.4 inches depth, with a seat height of 15.5 inches. It also indicates a weight capacity of 330 lbs and a chair weight of 32 lbs.

Image 3: The VINGLI Elizabeth Cast Aluminum Patio Dining Chairs are designed to be stackable, allowing for convenient storage when not in use, optimizing space on your patio or balcony.

Image 4: Detailed view of the chair's features, including the elegant tulip pattern on the backrest, ergonomically curved armrests, a comfortable removable cushion, and adjustable foot levelers for stability on uneven surfaces.

5. Usage Guidelines

These chairs are designed for both indoor and outdoor use, offering versatility for various environments.

• Recommended Uses: Ideal for dining, relaxing, and general seating in patio, garden, balcony, or indoor dining areas.
• Placement: Place on a flat, stable surface. Use the adjustable foot levelers to compensate for uneven ground.
• Movement: When moving chairs, lift them rather than dragging to prevent damage to the chair or floor surface.

6. Care and Maintenance

Proper care will extend the life and appearance of your VINGLI patio chairs.

• Cleaning: Wipe down the aluminum frame with a soft cloth and mild soap and water. Rinse thoroughly and dry completely to prevent water spots.
• Cushion Care: The cushions are removable. Spot clean with a mild detergent and water. Allow to air dry completely. Store cushions indoors during inclement weather or when not in use for extended periods.
• Rust Prevention: The cast aluminum material is naturally rust-resistant. However, regular cleaning and ensuring the chairs are dry after rain can further protect the finish.
• Storage: When not in use, especially during off-seasons, store chairs in a dry, covered area. The stackable design facilitates compact storage.

7. Troubleshooting

If you encounter any issues with your chairs, refer to the following common solutions:

• Wobbling Chair: Check all assembly screws to ensure they are fully tightened. Adjust the foot levelers on the bottom of the chair legs to stabilize it on uneven surfaces.
• Difficulty Assembling: Ensure you are following the assembly directions exactly. Do not fully tighten screws until all parts are loosely connected. If screw holes do not align, loosen adjacent screws to allow for slight adjustment.
• Missing Parts: If any parts are missing from your package, please contact VINGLI customer support for assistance.

8. Product Specifications

9. Warranty and Customer Support

VINGLI products are manufactured to high-quality standards and are backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the documentation included with your purchase or visit the official VINGLI website.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact VINGLI customer support through the retailer where the product was purchased or via the contact information provided on the VINGLI brand store page.

For more information, visit the VINGLI Store on Amazon.