Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Yale Assure Lock 2 Touchscreen with Wi-Fi (Model YRD420-WFI-619). Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: The Yale Assure Lock 2, showing the exterior touchscreen keypad with numbers 0-9, settings, and checkmark buttons, and the interior unit with a thumbturn and privacy button, both in a satin nickel finish.
Package Contents
Verify that all components are present before beginning installation:
- Assure Lock 2 Exterior Touchscreen Keypad & Deadbolt
- Interior Lock Assembly
- Wi-Fi Smart Module
- Battery Cover
- Mounting Plate
- DoorSense Sensor
- (4) AA Batteries
- Strike Plate
- Mounting Screws
- Reset Pin
- Installation Guide (this document)
Setup
1. Installation
Follow the detailed steps in the included installation guide for physical installation. Ensure your door is properly prepared according to the provided templates. Proper door preparation is crucial for optimal lock performance.
- Remove existing deadbolt.
- Install the new deadbolt latch.
- Install the exterior touchscreen keypad.
- Install the interior mounting plate.
- Connect the cable from the exterior keypad to the interior assembly.
- Install the interior lock assembly.
- Install the strike plate on the door frame.
- Install the DoorSense sensor.
2. Battery Installation
Insert the four (4) AA batteries into the interior lock assembly, observing correct polarity. Replace the battery cover securely.
3. Wi-Fi Smart Module Installation
The Wi-Fi Smart Module enables remote access and smart home integration. Insert the module into the designated slot on the interior lock assembly. Refer to the Yale Access app for further setup and pairing instructions.
4. Yale Access App Setup
Download the Yale Access app from your device's app store. Create an account and follow the in-app instructions to add your Yale Assure Lock 2. This process will guide you through connecting the lock to your home Wi-Fi network and calibrating the DoorSense sensor.
Operating Instructions
1. Unlocking the Door
- Via Touchscreen Keypad: Enter your 4- to 8-digit access code on the touchscreen. The lock will retract the deadbolt.
- Via Yale Access App: Use the Yale Access app on your smartphone for remote unlocking.
- Auto-Unlock: If enabled, the lock will automatically unlock when your mobile device enters Bluetooth proximity.
2. Locking the Door
- Manual Locking: From the exterior, press any key on the touchscreen. From the interior, turn the thumbturn.
- Via Yale Access App: Use the Yale Access app on your smartphone for remote locking.
- Auto-Lock: If enabled, the lock will automatically lock after a set period of time or when your mobile device leaves Bluetooth range. The DoorSense sensor ensures the door is closed before auto-locking.
3. Managing Access Codes
Access codes can be created, modified, and deleted through the Yale Access app. Up to 250 unique codes can be managed for guests, family, or tenants.
4. Smart Home Integration
The Yale Assure Lock 2 is compatible with various smart home platforms, including Amazon Alexa, Apple Siri, and Google Home. Refer to the Yale Access app and your smart home hub's documentation for integration instructions.
5. DoorSense Functionality
The DoorSense sensor monitors the door's open/closed status. This feature enhances auto-lock/unlock functions and provides notifications regarding door status via the Yale Access app.
Maintenance
1. Battery Replacement
The lock will provide low battery warnings through the Yale Access app and audible alerts. Replace all four (4) AA batteries simultaneously with new, high-quality alkaline batteries. Do not mix old and new batteries or different battery types.
2. Cleaning
Clean the touchscreen and lock surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents, which can damage the finish or electronic components.
3. Firmware Updates
Ensure your lock's firmware is up to date through the Yale Access app. Firmware updates provide performance improvements and security enhancements.
Troubleshooting
- Lock not responding: Check battery levels. Ensure the Wi-Fi Smart Module is properly seated.
- Access code not working: Verify the code in the Yale Access app. Ensure the lock is not in privacy mode.
- Auto-lock/unlock issues: Calibrate the DoorSense sensor via the Yale Access app. Ensure your mobile device's Bluetooth is enabled and the app has location permissions.
- Connectivity problems: Check your home Wi-Fi network. Ensure the lock is within range of your Wi-Fi router. Restart the Wi-Fi Smart Module if necessary.
- Lock is jammed: Ensure the door frame and strike plate are aligned correctly. Check for any obstructions.
For further assistance, refer to the Yale Access app's help section or visit the official Yale support website.
Specifications
| Feature | Detail |
|---|---|
| Model Number | YRD420-WFI-619 |
| Brand | Yale |
| Lock Type | Deadbolt, Touchscreen Keypad, Wi-Fi Enabled |
| Connectivity | Wi-Fi, Bluetooth |
| Power Source | 4 AA Batteries (included) |
| Access Codes | Up to 250 (4-8 digits) |
| Dimensions (L x W x H) | 5.7 x 5.7 x 9.7 inches |
| Weight | 8.49 pounds |
| Color/Finish | Satin Nickel |
| Special Features | Touchscreen, Wi-Fi, DoorSense, Auto-Lock/Unlock, Voice Control (Alexa, Siri, Google Home) |
| UPC | 081023091039 |
Warranty and Support
For warranty information and technical support, please visit the official Yale website or contact Yale customer service. Keep your proof of purchase for warranty claims.
Online Support: www.yalehome.com/us/en/support
