EGO Power+ HPW3200

EGO POWER+ 3200 PSI Electric Pressure Washer

Model: HPW3200

Brand: EGO Power+

Important Safety Information

Always read and understand all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

  • Keep away from children.
  • Never spray electrical components, people, or animals.
  • Always wear appropriate personal protective equipment, including eye protection.
  • Ensure all connections are secure before starting the unit.
  • Do not operate the pressure washer if any parts are damaged.

Product Overview

The EGO POWER+ 3200 PSI Electric Pressure Washer (HPW3200) is designed for powerful and efficient cleaning tasks. It utilizes EGO's Peak Power™ technology, combining the output of two 56V ARC Lithium™ batteries to deliver high pressure and flow rates.

EGO POWER+ 3200 PSI Electric Pressure Washer

Figure 1: EGO POWER+ 3200 PSI Electric Pressure Washer, Model HPW3200.

Key Features:

  • Peak Power™ Technology: Combines two 56V ARC Lithium™ batteries for up to 3200 PSI at 1.2 GPM (up to 2.0 GPM max).
  • Variable Pressure Control: Select ECO, High, and Turbo modes via the wand-integrated display.
  • Battery Status Display: View battery charge status directly on the wand.
  • Quick Connection Points: Facilitates easy setup and breakdown for hoses and wand.
  • Telescopic Handle: Extends for easy transport and collapses for compact storage.
  • Versatile Water Source: Connects to a garden hose or draws from a fresh water source (e.g., bucket) using the included siphon hose.

Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, contact EGO Power+ customer service.

  • EGO POWER+ 3200 PSI Pressure Washer Unit (HPW3200)
  • Flexible High-Pressure Hose
  • Siphon Hose
  • Quick-Connect Short Pressure Washer Gun
  • Quick-Connect Wand Lance
  • Stainless Steel Wand
  • Foam Cannon
  • Filter
  • 15° Nozzle
  • 25° Nozzle
  • 40° Nozzle
  • Turbo Nozzle
  • Rinse Nozzle

Note: Batteries and charger are sold separately and are required for operation.

Setup

1. Unpacking and Assembly

  1. Carefully remove all components from the packaging.
  2. Extend the telescopic handle by pulling it upwards until it locks into place. This handle aids in transport and compact storage.
  3. Attach the quick-connect short pressure washer gun and wand lance to the high-pressure hose. Ensure connections are secure.
  4. Connect the high-pressure hose to the pressure washer unit's outlet.
Quick Connection Points for Hose and Wand

Figure 2: Illustrates the quick connection points for the hose and wand, ensuring easy and secure attachment.

Telescopic Handle Extended

Figure 3: The telescopic handle can be extended for convenient transport and collapsed for compact storage.

2. Connecting Water Source

The HPW3200 can draw water from two types of sources:

  • Garden Hose Connection: Connect a standard garden hose to the water inlet on the pressure washer unit. Ensure the hose is free of kinks and has adequate water flow.
  • Siphon Hose (Bucket Draw): For drawing water from a fresh water source like a bucket or tank, attach the included siphon hose to the designated inlet. Ensure the filter end of the siphon hose is fully submerged in the water source.

3. Battery Installation

The pressure washer requires two EGO POWER+ 56V ARC Lithium™ batteries for operation. Ensure batteries are fully charged before use.

  1. Open the battery compartment cover on the top of the pressure washer.
  2. Insert two charged EGO POWER+ 56V ARC Lithium™ batteries into their respective slots until they click securely into place.
  3. Close the battery compartment cover.
Installing EGO POWER+ ARC Lithium Batteries

Figure 4: Demonstrates the installation of two EGO POWER+ ARC Lithium batteries into the pressure washer's battery compartment, activating Peak Power™ technology.

Operating Instructions

1. Power Modes and Controls

The pressure washer features a wand-integrated display for selecting power modes and viewing battery status.

  1. Press the power button on the pressure washer unit to turn it on.
  2. On the wand's display, select your desired power mode:
    • ECO Mode: For lighter cleaning tasks and extended runtime.
    • High Mode: Standard power for general cleaning.
    • Turbo Mode: Maximum power for stubborn dirt and grime.
  3. The display also shows the current battery charge status.
Wand-Integrated Display for Pressure Control and Battery Status

Figure 5: Close-up of the wand's integrated display, allowing users to control pressure modes (ECO, High, Turbo) and monitor battery charge status.

2. Nozzle Selection and Usage

Different nozzles are provided for various cleaning applications. Always select the appropriate nozzle for the task to prevent damage to the surface being cleaned.

  • 15° Nozzle: A concentrated spray for tough stains and smaller areas.
  • 25° Nozzle: A wider spray for general cleaning of larger surfaces.
  • 40° Nozzle: The widest spray, ideal for delicate surfaces or rinsing.
  • Turbo Nozzle: Creates a rotating jet for maximum cleaning power on very stubborn dirt.
  • Rinse Nozzle: Low-pressure, high-flow for applying soap or gentle rinsing.
  • Foam Cannon: Attach for applying detergent or cleaning solutions.

3. Estimated Runtime

The runtime of the pressure washer varies depending on the battery capacity and the selected power mode. The table below provides estimated runtimes with two batteries.

Recommended Battery (2x)Mins ECOMins HighMins Turbo
2 x 5.0Ah502512.5
2 x 6.0Ah603015
2 x 7.5Ah7537.518.75
2 x 10.0Ah1005025
2 x 12.0Ah1206030

Note: 2.5Ah and 4.0Ah batteries are compatible but not recommended for optimal tool performance and runtime.

Maintenance

1. Cleaning and Storage

  • After each use, disconnect the water supply and run the pressure washer for a few seconds to clear any remaining water from the pump and hose.
  • Remove batteries before cleaning or storing.
  • Wipe down the unit with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Store the pressure washer in a dry, protected area where temperatures will not fall below freezing. Freezing water can damage the pump.
  • Coil the high-pressure hose neatly and store all nozzles and accessories in a designated place to prevent loss.

Troubleshooting

ProblemPossible CauseSolution
No pressure or low pressure
  • Insufficient water supply
  • Air in the pump
  • Clogged nozzle
  • Kinked hose
  • Ensure water source is fully open and providing adequate flow.
  • Bleed air from the system by running water through the hose before starting the unit.
  • Clean or replace the nozzle.
  • Straighten any kinks in the hose.
Unit does not start
  • Batteries not installed correctly
  • Batteries are depleted
  • Power button not pressed
  • Ensure batteries are fully seated and clicked into place.
  • Charge batteries fully.
  • Press the main power button on the unit.
Motor runs but no water sprays
  • Water inlet filter clogged
  • Nozzle clogged
  • Air in the pump
  • Clean the water inlet filter.
  • Clear any obstructions from the nozzle.
  • Refer to 'Air in the pump' solution above.
Short runtime
  • Batteries not fully charged
  • Using Turbo mode excessively
  • Battery capacity is too low for task
  • Ensure batteries are fully charged before use.
  • Switch to ECO or High mode for longer tasks.
  • Consider using higher capacity batteries (e.g., 7.5Ah, 10.0Ah, or 12.0Ah) for extended runtime.

Specifications

SpecificationDetail
BrandEGO Power+
Model NumberHPW3200
Power SourceBattery Powered (56V ARC Lithium)
Maximum Pressure3200 PSI
Maximum Flow Rate1.2 GPM (up to 2.0 GPM max)
Item Weight36.2 Pounds
Hose Length7.62 Meters
Product Dimensions (L x W x H)20.87"L x 14.96"W x 25.39"H
ColorGray
UPC724901379972, 195532101353

Warranty and Customer Support

Warranty Information

The EGO POWER+ 3200 PSI Electric Pressure Washer (HPW3200) comes with a 5-year tool warranty. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the official EGO Power+ website.

Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact EGO Power+ customer support. Visit the official EGO Power+ website for the most up-to-date contact information, including phone numbers and online support options.

Always refer to the official EGO Power+ website or included manual for the most current and detailed information.

© 2024 EGO Power+. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.