LEKATO WS-70 UHF Wireless Guitar System

1. Introduction

Thank you for choosing the LEKATO WS-70 UHF Wireless Guitar System. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and longevity of your wireless system.

2. Product Overview

The LEKATO WS-70 is a high-performance wireless audio transmission system designed for electric guitars, basses, and other compatible electronic musical instruments. It features advanced UHF technology for stable signal transmission and ultra-low latency.

Key Features:

• 70 Channels Supported: Allows up to 70 sets of instruments to operate simultaneously without interference.
• Ultra-Low Latency: Less than 3 ms latency for real-time audio transmission.
• Extended Range: Effective transmission range of approximately 80 to 131 feet (25-40 meters).
• Wide Frequency Response: Full 20 Hz to 20 kHz frequency response for clear, high-quality sound.
• Rechargeable Battery: Built-in lithium battery provides over 6 hours of continuous use on a full charge.
• Plug & Play: Simple pairing process with no complex setup required.
• 220° Rotatable 1/4" Plug: Compatible with various instrument and amplifier jack positions.
• Multi-Receiver Support: One transmitter can connect to up to four receivers simultaneously.

Components:

• 1 x Wireless Transmitter
• 1 x Wireless Receiver
• 1 x Dual-ended USB Charging Cable

3. Setup

3.1 Initial Charging

Before first use, fully charge both the transmitter and receiver. Use the included dual-ended USB charging cable to connect both units to a USB power adapter (not included) or a computer's USB port.

Image: The LEKATO WS-70 wireless transmitter and receiver connected to a dual USB charging cable. The image highlights the 6-hour playing time and battery indicator, demonstrating the charging process.

The battery indicator light will show charging status. A full charge typically takes a few hours.

3.2 Connecting the Transmitter

Plug the transmitter unit into the 1/4" output jack of your instrument (e.g., electric guitar, bass). The 220° rotatable plug allows for flexible positioning to accommodate various jack orientations.

Image: The LEKATO WS-70 transmitter and receiver units, illustrating their 220° rotatable 1/4" plugs. The image also shows various compatible devices such as guitars, basses, violins, keyboards for the transmitter, and amplifiers, audio mixers, effect pedals, and guitar loopers for the receiver.

3.3 Connecting the Receiver

Plug the receiver unit into the 1/4" input jack of your amplifier, audio mixer, effect pedal, or other audio input device.

3.4 Power On and Pairing

1. Press and hold the power button on both the transmitter and receiver until their indicator lights illuminate.
2. The units will automatically attempt to pair. If they do not pair automatically, long-press the signal button on both the transmitter and receiver simultaneously. The indicator lights will flash and then turn solid when successfully paired.
3. Once paired, the system is ready for use.

Image: The LEKATO WS-70 wireless system demonstrating its plug-and-play feature. The image shows the transmitter connected to a guitar and the receiver to an amplifier, highlighting automatic pairing and the portable design.

4. Operating Instructions

4.1 Basic Operation

After successful pairing, ensure your instrument and amplifier are powered on and set to appropriate volume levels. Play your instrument; the sound will be transmitted wirelessly to your amplifier.

4.2 Channel Selection

The WS-70 system supports 70 channels to avoid interference. If you experience interference, short-press the signal button on both the transmitter and receiver to switch to a different channel. The units will automatically re-pair on the new channel.

Image: The LEKATO WS-70 wireless system illustrating its capability to support 70 sets of simultaneous use. It shows multiple guitar setups, each with a transmitter and receiver, and highlights the "One Click to Switch Channels" feature to prevent interference.

4.3 Multi-Receiver Connection

One LEKATO WS-70 transmitter can simultaneously connect to up to four receivers. To do this, pair the transmitter with each receiver individually by long-pressing the signal button on both units. Ensure each receiver is connected to a separate amplifier or input device.

Image: The LEKATO WS-70 wireless system demonstrating its ability for one transmitter to connect to four receivers. This setup is shown with a guitar connected to a transmitter, and four receivers connected to separate amplifiers, ideal for complex stage setups.

5. Maintenance

5.1 Charging

Recharge the units when the battery indicator shows low power. A full charge provides approximately 6 hours of working time. Always use the provided dual-ended USB cable for charging.

5.2 Cleaning

Wipe the units with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

5.3 Storage

Store the wireless system in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the batteries are partially charged (around 50%) to prolong battery life.

6. Troubleshooting

• No Sound:
  • Ensure both transmitter and receiver are powered on.
  • Check if both units are successfully paired (indicator lights solid). If not, re-pair them.
  • Verify that the instrument and amplifier volumes are turned up.
  • Check battery levels; recharge if necessary.
  • Ensure the transmitter is securely plugged into the instrument and the receiver into the amplifier.
• Interference or Signal Dropouts:
  • Move closer to the receiver; the effective range is 80-131 feet.
  • Short-press the signal button on both units to switch to a different channel.
  • Avoid placing the units near other wireless devices (Wi-Fi routers, cordless phones) or large metal objects that may cause interference.
  • Ensure there are no obstructions between the transmitter and receiver.
• Device Not Charging:
  • Verify the USB cable is properly connected to both units and the power source.
  • Try a different USB power adapter or port.
  • Ensure the charging cable is not damaged.
• Lag or Delay:
  • The system has ultra-low latency (<3ms). If you experience noticeable lag, check for strong interference sources or try a different channel.

7. Specifications

8. Warranty Information

LEKATO products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product packaging or visit the official LEKATO website. Keep your purchase receipt as proof of purchase for warranty claims.

9. Customer Support

If you encounter any issues or have questions regarding your LEKATO WS-70 Wireless Guitar System, please contact LEKATO customer support. Contact information can typically be found on the product packaging, the official LEKATO website, or through your retailer.