OKD 48" Farmhouse Lift Top Coffee Table with Sliding Barn Door - Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your OKD 48" Farmhouse Lift Top Coffee Table with Sliding Barn Door. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: The OKD 48" Farmhouse Lift Top Coffee Table, featuring a rustic design with sliding barn doors and a lift-top mechanism.

Important Safety Information

• Use caution with the lifting top mechanism to avoid pinching.
• Ensure proper support when moving the table due to its weight.
• Always follow product care instructions.
• Do not lift the tabletop with the sliding barn door closed to prevent injury.
• Be aware of the table's weight and dimensions to prevent strain or injury during assembly.
• Do not exceed the maximum weight recommendation of 150 pounds for the tabletop (100 pounds when lifted).

Parts and Hardware

Before assembly, verify that all components and hardware are present and undamaged. Refer to the included assembly guide for a complete list of parts and their corresponding labels. If any parts are missing or damaged, contact customer support immediately.

Included Components: Coffee Table parts, Assembly Guide, Installation Tool (e.g., screwdriver).

Assembly Instructions

Assembly is designed to be straightforward with detailed instructions and coded parts. It is recommended that two people participate in the assembly process, especially when handling larger components and installing the lift-top mechanism.

General Steps:

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Identify each part using the labels provided in the assembly guide.
3. Follow the step-by-step diagrams and instructions in the included assembly guide.
4. Use the provided installation tool for all fastening. Do not overtighten screws.
5. Ensure all connections are secure before proceeding to the next step.

Lift-Top Mechanism Assembly Note:

The lift-top mechanism requires careful installation. It is advised to have assistance to hold components in place while securing the mechanism. The tabletop should be lifted with both hands to ensure even movement.

Image: The high-quality metal gas lift mechanism, designed for smooth and stable operation of the tabletop.

Optional Lift Direction Reversal:

If you prefer the lift-top to open in the opposite direction (e.g., towards a couch rather than away from it), modifications to the assembly steps are required. This involves reversing the installation of specific end pieces and rotating the tabletop 180 degrees during its final attachment. Refer to the detailed instructions in the assembly guide for specific part numbers and steps, or consult online resources for user-submitted modifications if the guide does not explicitly cover this.

Operating Instructions

Lift-Top Function:

• To raise the tabletop: Gently lift the front edge of the tabletop with both hands. The gas lift mechanism will assist in a smooth upward motion.
• To lower the tabletop: Gently push down on the tabletop with both hands. The mechanism will allow it to descend smoothly and quietly.
• Avoid placing excessive weight on the tabletop when it is in the lifted position (maximum 100 lbs).
• Do not force the mechanism. If it feels stiff, ensure no obstructions are present in the hidden compartment.

Image: Front and back views of the coffee table, highlighting the lift-top function and storage areas.

Sliding Barn Doors and Adjustable Shelves:

• The barn doors slide smoothly along their tracks to access the side storage cabinets.
• The internal shelves in the side cabinets and middle open cubby are adjustable. To adjust, remove the shelf, reposition the shelf pins to the desired height, and reinsert the shelf.

Image: Detail of the sliding barn door and adjustable storage shelves, demonstrating their functionality.

Maintenance and Care

• Cleaning: Wipe the table surfaces with a dry cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Immediately blot any spills with a clean, dry cloth to prevent staining.
• Inspection: Periodically check all screws and fasteners to ensure they remain tight. Retighten as necessary.
• Movement: When moving the table, lift it rather than dragging it to prevent damage to the legs and frame.

Troubleshooting

Product Specifications

• Brand: OKD
• Model Name: Lift Top Coffee Table
• Model Number: BDC48CTWLT
• Dimensions (D x W x H): 22"D x 48"W x 22"H
• Item Weight: 111 Pounds
• Maximum Weight Recommendation (Tabletop): 150 Pounds (closed), 100 Pounds (lifted)
• Material Type: Engineered Wood (Frame, Top, Base)
• Color: Antique White
• Number of Doors: 2 (Sliding Barn Doors)
• Tabletop Thickness: 1 Inch
• Leg Length: 3.34 Inches
• Recommended Number of People for Assembly: 2
• Tools Recommended For Assembly: Screw Driver (included)
• Product Care Instructions: Wipe with Dry Cloth

Image: Detailed view of the table's construction, including corner metal trim, handles, and support legs.

Customer Support

For any questions, missing parts, or assistance with assembly, please contact OKD customer support. Refer to your purchase documentation or the OKD official website for contact information. We aim to respond to inquiries within 24 hours.

While specific warranty details are not included in this manual, please retain your proof of purchase for any warranty claims.