BAYBEE Baby High Chair User Manual

Introduction

Thank you for choosing the BAYBEE Adaptable 2-in-1 High Chair. This versatile product is designed to grow with your child, transitioning from an infant high chair to a toddler booster seat. It promotes self-feeding confidence and family mealtime participation. Please read this manual carefully before assembly and use to ensure safe and proper operation.

Important Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Always use the restraint system. Ensure the 5-point safety belt is securely fastened and properly adjusted to your child.
• Never leave child unattended. Constant supervision is required.
• Prevent serious injury from falling or sliding out. Always secure child in the restraint.
• Do not use the high chair if any parts are broken, torn, or missing. Contact customer service for replacement parts.
• Ensure the high chair is placed on a flat, stable surface.
• Do not use the high chair near stairs, steps, or uneven surfaces.
• Keep children away from the product during assembly and disassembly.
• Do not allow children to play with the high chair.
• Maximum weight capacity: Refer to specifications. Do not exceed.
• This product is intended for children aged 6 months to 3 years.

Parts List

Please check that all components are present before beginning assembly:

• Main High Chair Frame (with integrated seat)
• Footrest
• Food Tray (removable)
• Tray Liner (removable)
• Legs (typically 4 pieces)
• Assembly Hardware (screws, bolts, etc. - quantity may vary)
• Instruction Manual (this document)

Image: All components of the BAYBEE high chair, including the main seat, legs, footrest, and food tray, displayed before assembly.

Setup and Assembly

Follow these steps to assemble your high chair:

1. Unpack Components: Carefully remove all parts from the packaging and verify against the parts list.
2. Attach Legs: Insert the high chair legs into the designated slots on the main frame. Ensure they click securely into place or are fastened with the provided hardware. Refer to the specific diagrams in your physical manual for correct orientation.
3. Install Footrest: Slide the footrest into its attachment points on the leg assembly. Adjust to the desired height (if applicable) and secure.
4. Attach Food Tray: Align the food tray with the slots on the high chair's armrests. Slide it on until it locks into position. The tray is designed to be easily removable for cleaning.
5. Safety Check: Before first use, ensure all connections are secure and the high chair is stable. Test the 5-point safety harness for proper function.

Operating Instructions

Adjusting High Chair Height

The high chair features two height settings. To adjust, locate the height adjustment mechanism (usually buttons or levers on the legs or frame). Press/release and slide the upper section of the chair to the desired height. Ensure both sides are adjusted evenly and lock into place before use.

Using the Food Tray

• Attaching: Slide the tray onto the armrests until it clicks into place.
• Removing: Locate the release levers or buttons (typically underneath the tray or on the sides) and press them while pulling the tray forward.
• Adjusting: The tray may have multiple positions to accommodate your child's size. Slide the tray forward or backward to the desired position and ensure it locks securely.
• The gap-free tray design helps prevent pinched fingers and food accumulation.

Securing Your Child (5-Point Safety Belt)

1. Place your child in the high chair.
2. Bring the shoulder straps over your child's shoulders and the waist straps around their waist.
3. Connect the shoulder straps to the waist straps.
4. Insert the combined buckles into the crotch buckle until they click securely.
5. Adjust the straps to ensure a snug fit, leaving no more than one finger's width between the strap and your child.
6. To release, press the button on the crotch buckle.

Using as a Booster Seat

To convert the high chair into a booster seat, detach the lower leg assembly. The seat unit can then be placed directly onto a standard dining chair and secured using the chair's own straps (if provided with the booster kit, or as per specific booster seat instructions). Ensure the booster seat is stable and securely fastened to the dining chair before placing your child in it.

Maintenance and Cleaning

• Seat Upholstery: The PU leather upholstery is designed for easy cleaning. Wipe spills and stains immediately with a damp cloth and mild soap. Do not use abrasive cleaners or harsh chemicals. Allow to air dry completely.
• Food Tray: The removable food tray and liner can be washed with warm soapy water or wiped clean with a damp cloth. For thorough cleaning, the tray liner can be removed.
• Frame: Wipe the plastic and stainless steel frame components with a damp cloth.
• Storage: Store the high chair in a clean, dry place away from direct sunlight and extreme temperatures.
• Regular Checks: Periodically inspect all parts for wear, damage, or loose connections. Tighten any loose screws or fasteners. Discontinue use if any part is broken or missing.

Troubleshooting

Specifications

• Model Number: BHC011
• Product Dimensions: 11.81"D x 9.84"W x 19.69"H (assembled)
• Material Type: Plastic, Stainless Steel, PU Leather (upholstery)
• Age Range (Recommended): 6 Months to 3 Years (or up to 4 years as per some specifications)
• Height Settings: 2 adjustable height positions
• Food Tray: Removable, gap-free design
• Safety Harness: 5-point safety belt
• Footrest: Adjustable

Warranty and Support

For warranty information, product support, or to order replacement parts, please contact BAYBEE customer service through their official website or the retailer where the product was purchased. Please have your model number (BHC011) and proof of purchase ready when contacting support.