Introduction
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your KIMEX 112-6615K2 15U 19-inch Open Frame Server Rack. Please read this manual thoroughly before proceeding with installation to ensure proper setup and safe operation.
The KIMEX 112-6615K2 is designed for integrating and protecting IT and network equipment. Its open frame design promotes optimal airflow, and its robust construction supports significant weight, making it suitable for professional environments.
Safety Information
Observe the following safety guidelines during assembly and operation:
- Ensure the rack is placed on a stable, level surface.
- Distribute equipment weight evenly within the rack to prevent tipping.
- Do not exceed the maximum load capacity of 800 kg.
- Use appropriate lifting techniques when handling heavy components.
- Keep all tools and small parts away from children.
Package Contents
The KIMEX 112-6615K2 rack is delivered in a kit. Please verify that all components are present before beginning assembly:
- Rack frame components (uprights, base, top)
- Mounting rails (adjustable)
- 4 x Casters (wheels)
- 4 x Leveling feet (stabilizers)
- Assembly hardware (screws, nuts, washers)
- Assembly tools (e.g., wrench, screwdriver - may not be included, check packaging)
Setup and Assembly
Follow these steps to assemble your KIMEX open frame rack:
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, flat surface.
- Assemble Base: Attach the side uprights to the base frame using the provided hardware. Ensure all connections are secure.
- Install Top Frame: Secure the top frame to the assembled uprights.
- Attach Mounting Rails: Install the adjustable 19-inch mounting rails to the uprights. These rails feature U-markings for precise equipment placement. Adjust their depth as needed for your equipment.
- Install Casters or Leveling Feet:
- For mobility, screw the 4 casters into the designated holes on the bottom of the base.
- For stationary placement and enhanced stability, screw the 4 leveling feet into the designated holes. These can be adjusted to level the rack on uneven surfaces.
- It is possible to use both: casters for initial positioning, then lower the leveling feet to lift the casters off the ground for stability.
Image Description: This image shows a detailed view of the rack's base, highlighting one of the caster wheels and an adjacent adjustable leveling foot. The caster is designed for mobility, while the leveling foot provides stability and allows for height adjustment on uneven floors.
- Final Inspection: Double-check all connections to ensure they are tight and secure before loading any equipment.
Image Description: A complete view of the KIMEX 15U open frame server rack, fully assembled and equipped with caster wheels. The open design is visible, showcasing the internal mounting rails with U-markings and the ventilation on the top panel.
Operating Instructions
Once assembled, the rack is ready for equipment installation:
- Equipment Mounting: Use appropriate rack-mount hardware (not included) to secure your servers, network switches, and other 19-inch compatible equipment to the mounting rails. The U-markings on the rails assist in precise alignment.
- Cable Management: Utilize the open frame design for efficient cable routing. Consider adding optional cable management accessories (not included) for a tidy setup.
- Airflow: The open frame design naturally provides excellent airflow. Ensure that equipment is installed in a manner that does not obstruct internal air circulation.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your rack:
- Cleaning: Periodically wipe down the rack surfaces with a soft, damp cloth. Avoid abrasive cleaners.
- Hardware Check: Annually inspect all screws and bolts to ensure they remain tight. Re-tighten as necessary.
- Caster/Foot Inspection: If using casters, check for smooth operation. If using leveling feet, ensure they are securely positioned and the rack remains level.
- Ventilation: Ensure the ventilation slots on the top panel remain clear of obstructions.
Image Description: This close-up image displays the "KIMEX" brand logo prominently on the top panel of the rack, alongside a series of ventilation slots. These slots are crucial for heat dissipation and maintaining optimal operating temperatures for installed equipment.
Troubleshooting
If you encounter issues, consider the following:
- Rack Instability: Ensure all assembly hardware is tightened. If using leveling feet, adjust them to stabilize the rack. Ensure weight is evenly distributed.
- Equipment Not Fitting: Verify that your equipment is 19-inch rack-mountable. Check the depth of the adjustable mounting rails and adjust if necessary.
- Overheating Equipment: While an open frame provides good airflow, ensure no internal obstructions are blocking equipment fans. Consider ambient room temperature.
Specifications
| Feature | Detail |
|---|---|
| Brand | KIMEX |
| Model Number | 112-6615K2 |
| Rack Units | 15U |
| Rack Standard | 19-inch |
| Dimensions (L x W x H) | 60 x 60 x 80 cm |
| Material | Alloy Steel |
| Color | Black |
| Mounting Type | Floor Mount |
| Special Feature | Shock Resistant |
| Compatible Devices | Server |
| Maximum Load Capacity | 800 kg |
Warranty Information
For detailed warranty information, please refer to the official KIMEX website or contact your point of purchase. Keep your proof of purchase for warranty claims.
Support
If you require further assistance or have questions not covered in this manual, please contact KIMEX customer support through their official website or the contact information provided with your purchase.
KIMEX Official Website: www.kimex.fr (Example link, actual link may vary)
