BORYLI LED 150W Moving Head Stage Lighting Operating Manual

1. Introduction

This manual provides essential information for the safe and effective operation of your BORYLI LED 150W Moving Head Stage Lighting fixture. Please read this manual thoroughly before installation and use, and retain it for future reference. Proper installation and operation are crucial for optimal performance and longevity of the device.

2. Safety Instructions

• Always connect the fixture to a grounded power outlet.
• Ensure the power supply voltage matches the specified requirements (AC100-240V, 50-60Hz).
• Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
• Avoid direct eye exposure to the light source.
• Ensure adequate ventilation around the fixture to prevent overheating.
• Mount the fixture securely using appropriate hardware.
• Disconnect power before cleaning or performing any maintenance.
• This product is designed for indoor use only (IP20). Do not expose to moisture or extreme temperatures.

3. Product Overview

Figure 3.1: Front view of the BORYLI LED 150W Moving Head Stage Lighting fixture.

The BORYLI LED 150W Moving Head Stage Lighting is a versatile fixture designed for various stage and event applications. It features a powerful 150W white LED light source complemented by an RGB light strip ring, offering a wide range of dynamic lighting effects.

Key Features:

• Light Source: 150W white light LED lamp bead with an additional 44PCS*0.2W RGB light strip ring.
• Color Palette: 7 distinct colors plus white light.
• Pattern Plate (Gobos): 11 static patterns plus an open circular pattern.
• Prism Effect: 18-facet prism for multi-beam effects.
• Dimming: Linear dimming from 0% to 100% brightness.
• Strobe: Adjustable flash speed from 1 to 20Hz.
• Movement: Horizontal (Pan) 0-540° and Vertical (Tilt) 0-200° with adjustable rotation speed.
• Control Modes: DMX512, Master/Slave, Self-propelled (Auto), Voice control, Remote control, APP control.
• Channels: 13 or 15 international standard DMX channels.
• Display: Digital display screen and LCD liquid crystal display screen for menu navigation.

4. Setup

4.1 Unpacking

Carefully remove the fixture from its packaging. Inspect for any damage during transit. Ensure all included components, such as the signal line, are present.

4.2 Mounting

The fixture is designed for floor mounting and includes a sturdy bracket for secure placement. Ensure the mounting surface is stable and capable of supporting the fixture's weight (approximately 12.27 pounds). Always use safety cables when suspending the unit.

4.3 Connections

Figure 4.1: Rear panel connections for DMX and power.

• Power Connection: Connect the included power cable to the power input port on the rear of the fixture and then to a suitable AC100-240V, 50-60Hz grounded power outlet.
• DMX Connection: For DMX control, connect a DMX cable from your DMX controller to the DMX IN (XLR socket) port on the fixture. To daisy-chain multiple fixtures, connect a DMX cable from the DMX OUT port of the first fixture to the DMX IN port of the next fixture.

5. Operating Modes

The BORYLI LED 150W Moving Head Stage Lighting offers several operating modes to suit different applications.

5.1 DMX Control Mode

This mode allows for precise control over all fixture functions using a DMX512 controller. The fixture supports 13 or 15 international standard DMX channels. Refer to the DMX channel chart (typically provided with the product) for detailed channel assignments and values.

5.2 Master/Slave Mode

In Master/Slave mode, one fixture acts as the master, controlling other linked fixtures (slaves). Connect the DMX OUT of the master unit to the DMX IN of the first slave unit, and continue daisy-chaining. Set the master unit to Master mode and all other units to Slave mode via the display menu.

5.3 Self-Propelled (Auto) Mode

The fixture can operate autonomously through pre-programmed sequences. Select 'Auto' mode from the display menu to activate built-in programs.

5.4 Voice Control Mode

The fixture can react to sound input. Select 'Sound' or 'Voice Control' mode from the display menu. The sensitivity may be adjustable.

5.5 Remote Control & APP Control

The fixture supports control via a remote control (if included) or a dedicated mobile application. Refer to the specific instructions for pairing and operation of these control methods.

6. Functions and Effects

6.1 Color Effects

Figure 6.1: Examples of various solid color beams produced by the fixture.

The fixture features a color wheel with 7 distinct colors plus white light, allowing for a wide spectrum of color washes and effects.

6.2 Pattern (Gobo) Effects

Figure 6.2: Examples of various projected patterns (gobos) from the fixture.

An 11-pattern plate, along with a circular open pattern, enables the projection of various shapes and textures onto surfaces.

6.3 Prism Effects

Figure 6.3: Examples of multi-beam effects, including those created by the prism.

The 18-facet prism can split the light beam into multiple beams, creating dynamic and expansive visual effects.

6.4 Movement

Figure 6.4: Examples of complex moving light patterns and stage effects.

The moving head offers a horizontal (Pan) range of 0-540° and a vertical (Tilt) range of 0-200°, allowing for wide coverage and dynamic beam positioning. Rotation speed is adjustable.

7. Maintenance

• Cleaning: Regularly clean the lenses and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Inspection: Periodically check all cables, connections, and mounting hardware for signs of wear or damage. Replace any damaged components immediately.
• Ventilation: Ensure ventilation openings are clear of dust and debris to maintain proper airflow and prevent overheating.

8. Troubleshooting

• No Power: Check power cable connection, power outlet, and ensure the fixture's power switch is on.
• No Light Output: Verify power, check DMX signal if in DMX mode, or try a different operating mode (e.g., Auto mode).
• Fixture Not Responding to DMX: Ensure DMX cables are correctly connected (DMX IN/OUT), DMX address is correctly set on the fixture, and the DMX controller is functioning. Check for DMX termination if using a long chain of fixtures.
• Erratic Movement: Check DMX signal integrity. If in Auto mode, power cycle the unit.
• Overheating: Ensure adequate ventilation. Clean any dust from vents. Operate within specified ambient temperature ranges.

9. Specifications

Figure 9.1: Dimensions of the BORYLI LED 150W Moving Head Stage Lighting fixture.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Retain your proof of purchase for warranty claims.