Peakeep Digital Alarm Clock

Product Overview

The Peakeep Digital Alarm Clock (Model MHP6010) is designed for clear time display and reliable alarm functionality. It features large LED numbers with 6 adjustable dimmer levels, a mirror-like face, and 5 adjustable alarm volumes, making it suitable for various users, including seniors and heavy sleepers. The clock operates primarily via a USB Type-C power adapter and includes a battery backup system to maintain settings during power outages.

Figure 1: Front view of the Peakeep Digital Alarm Clock, showcasing its large, clear LED display and mirror face.

Setup

Powering the Clock

The Peakeep Digital Alarm Clock requires continuous power via the included USB Type-C adapter. For optimal performance and to ensure settings are retained during power interruptions, it is highly recommended to install 4 AA batteries (not included) for backup.

1. Connect the provided USB Type-C power adapter to the DC 5V port on the back of the clock.
2. Plug the adapter into a standard electrical outlet. The display will illuminate.
3. Open the battery compartment cover on the back of the clock.
4. Insert 4 AA batteries, ensuring correct polarity (+/-).
5. Close the battery compartment cover securely.

Figure 2: Rear view of the clock, highlighting the DC 5V power input and USB port.

Figure 3: Illustration of the clock's dimensions and the battery backup feature, showing the 4 AA battery slots.

Operating Instructions

All control buttons are located on the back of the clock for a sleek front appearance.

Figure 4: Detailed view of the control buttons on the back of the clock.

Setting the Time

1. Press and hold the TIME SET button for 2 seconds to enter time setting mode. The hour digits will flash.
2. Use the + or - buttons to adjust the hour.
3. Press TIME SET again to confirm the hour and move to minute setting. The minute digits will flash.
4. Use the + or - buttons to adjust the minutes.
5. Press TIME SET once more to save the time and exit setting mode.

Setting the Alarm

1. Press and hold the ALARM SET button for 2 seconds to enter alarm setting mode. The alarm hour digits will flash.
2. Use the + or - buttons to adjust the alarm hour.
3. Press ALARM SET again to confirm the alarm hour and move to alarm minute setting. The alarm minute digits will flash.
4. Use the + or - buttons to adjust the alarm minutes.
5. Press ALARM SET once more to save the alarm time.
6. To turn the alarm ON/OFF, simply press the ON/OFF button. A bell icon will appear on the display when the alarm is active.

Adjusting Display Brightness (Dimmers)

The clock features 6 levels of display brightness, including an OFF setting. This allows for comfortable viewing in any lighting condition, from bright daylight to complete darkness.

• Press the DIMMER button repeatedly to cycle through the 6 brightness levels (L05 - brightest, L01 - dimmest) and OFF.

Figure 5: Visual representation of the 6 adjustable dimmer levels for the clock display.

Adjusting Alarm Volume

The alarm volume can be adjusted to 5 different levels, catering to light sleepers and heavy sleepers alike.

• Press the VOL+ or VOL- buttons to increase or decrease the alarm volume.

Figure 6: Diagram illustrating the 5 adjustable alarm volume levels.

Snooze Function

When the alarm sounds, press the large SNOOZE/LIGHT bar on top of the clock to activate the snooze function. The alarm will pause for 9 minutes and then sound again.

12/24 Hour Format Conversion

• Press the 12/24HR button to switch between 12-hour (with AM/PM indicator) and 24-hour time formats.

Daylight Saving Time (DST) On/Off

• Press the DST ON/OFF button to enable or disable Daylight Saving Time.

Maintenance

To ensure the longevity and proper functioning of your Peakeep Digital Alarm Clock, follow these maintenance guidelines:

• Cleaning: Gently wipe the clock's surface with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these may damage the mirror face or casing.
• Battery Replacement: If using the battery backup feature, replace the 4 AA batteries annually or when the display does not light up briefly during a power outage. Ensure correct polarity when inserting new batteries.
• Storage: If storing the clock for an extended period, remove the AA batteries to prevent leakage and potential damage. Store in a cool, dry place.

Troubleshooting

Specifications

Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact Peakeep customer service. Refer to the contact information provided on the product packaging or the official Peakeep website.

You may also reach out via email: sales@us-myhome.com