Pixelman 6.6Ft Charger Cable for Garmin User Manual

1. Introduction

This manual provides essential information for the proper use and maintenance of your Pixelman 6.6Ft Charger Cable for Garmin devices. Please read this manual thoroughly before using the product to ensure optimal performance and safety. This product is designed to provide a stable power supply to compatible devices.

Image 1.1: Two Pixelman 6.6Ft Mini USB Charger Cables.

2. Product Features

• Quantity: Each package contains two (2) 6.6-foot (approximately 2-meter) mini USB cables, offering flexibility for various charging needs.
• Voltage Regulator Module: Integrated printed circuit board (PCB) at the connector ensures a stable current flow, enhancing compatibility with vehicle power supplies and extending device lifespan.


Image 2.1: Mini USB connector with integrated PCB voltage regulator.

• 90-Degree Right-Angle Connector: Designed for use in confined spaces, such as car interiors, to prevent excessive cable bending and reduce strain on the port.


Image 2.2: Front and back view of the 90-degree mini USB connector.

• 22-Gauge Pure Copper Wire: Constructed with a 3.3mm large diameter, reinforced 22-gauge pure copper wire for durability and efficient, stable charging.


Image 2.3: Cable thickness and length illustration.

• Upgraded Magnetic Ring: Features a magnetic ring to shield high-frequency interference signals, improving equipment stability and extending service life.


Image 2.4: Cable with upgraded magnetic ring for interference reduction.

• Charging Functionality Only: This cable is designed exclusively for charging and does not support data transfer.


Image 2.5: Cable functionality: Charging only, no data transfer.

3. Setup and Installation

1. Identify Ports: Locate the mini USB charging port on your compatible device (e.g., Garmin GPS navigator, dash camera).
2. Connect to Device: Gently insert the 90-degree mini USB connector into your device's mini USB port. Ensure the connector is oriented correctly to avoid damage. The 90-degree design allows for a flush fit in tight spaces.
3. Connect to Power Source: Insert the standard USB-A end of the cable into a compatible USB power source, such as a car charger adapter, a USB wall adapter, or a computer USB port.
4. Verify Connection: Confirm that your device indicates it is receiving power or charging.

4. Operating Instructions

Once properly connected to a power source and your device, the Pixelman charger cable will begin supplying power. The primary function of this cable is to charge your device's internal battery or provide continuous power during operation.

• Charging: Connect the cable as described in the Setup section. Your device should display a charging indicator.
• Continuous Power: For devices like GPS navigators used in vehicles, the cable can provide continuous power, preventing battery drain during long trips.
• No Data Transfer: Remember that this cable does not support data synchronization or file transfer between your device and a computer. It is solely for power delivery.

5. Care and Maintenance

• Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable, especially near the connectors, to prevent internal wire damage.
• Cleaning: If necessary, gently wipe the cable and connectors with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• Handling: Always grasp the connector head when plugging or unplugging the cable. Avoid pulling directly on the cable itself, as this can damage the internal wiring or the connector.
• Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage to the insulation or connectors. Discontinue use if any damage is observed.

6. Troubleshooting

Device is not charging:

• Ensure both ends of the cable are securely connected to the device and the power source.
• Verify that the power source (e.g., car adapter, wall charger) is functional and providing power. Try a different power source if possible.
• Check the device's mini USB port for any debris or damage that might prevent a proper connection.
• Inspect the cable for any visible damage (cuts, kinks, bent pins). If damaged, discontinue use and replace the cable.
• Confirm that your device is compatible with a mini USB charging cable.

Cable feels loose in the device port:

• While the 90-degree connector is designed for a snug fit, excessive looseness might indicate wear on the device's port or the cable connector.
• Ensure the cable is fully inserted.
• If the issue persists, the device's port or the cable connector may be worn.

Device charges slowly:

• Ensure the power source provides sufficient current for your device. Some devices require higher amperage for faster charging.
• Avoid using the device for intensive tasks while charging, as this can slow down the charging process.

7. Specifications

8. Compatibility

This universal mini USB charger cable is suitable for various devices that utilize a mini USB port for power, including but not limited to:

• Car GPS Navigators (e.g., Garmin Nuvi series, Zumo Xt, Drivesmart 65, Dezl, Tomtom)
• Dashboard Cameras (Dash Cams)
• Rearview Mirror Cameras
• Reverse Cameras
• Other devices requiring a mini USB power input.

Partial list of compatible Garmin Nuvi models:

• 2250, 2539LMT, 2555LMT, 2557LMT, 2559LMT, 2589LMT, 2595LMT, 2597LMT, 2599LMTHD, 2639LMT, 2689LMT, 2699LMT, 2699LMTHD
• 50LMT, 50LMTHD, 51LM, 51LMT-S, 52LM, 55LM, 55LMT, 570LMT, 57LM, 60LMT, 60LM, 61LMT-S, 660LMT, 67LM, 67LMT, 770LMTHD
• 140, 200, 200W, 205, 205W, 215T, 250, 250W, 255, 255W, 260, 260W, 265T, 265WT, 270, 275, 275T, 295W, 300, 310, 350, 360, 370, 40LM, 465, 465LMT, 465T
• 500, 510, 50LM, 550, 650, 660, 670, 680, 750, 755T, 760, 765T, 770, 775T, 780, 785T, 805, 850, 855, 880, 885T

Image 8.1: Cable with examples of compatible devices.

9. Safety Information

• Do not expose the cable to water, moisture, or extreme temperatures.
• Avoid using the cable if it appears damaged or frayed.
• Keep out of reach of children and pets.
• Use only with compatible devices and appropriate power sources.
• Do not attempt to modify or disassemble the cable.

10. Warranty and Support

For information regarding warranty coverage or technical support, please refer to the product packaging or contact Pixelman customer service directly. Contact details can typically be found on the manufacturer's official website or through your point of purchase.