1. Safety Information
Read and understand all safety precautions before installation and use. This device is intended for installation in accordance with the National Electric Code (NEC) and local regulations. Improper installation can lead to electric shock, fire, or property damage.
- WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker or fuse box before installing or servicing.
- WARNING: RISK OF FIRE. Do not exceed the maximum load ratings.
- WARNING: RISK OF INJURY. Use only indoors.
- Ensure all wire connections are secure and properly insulated.
- This device requires a neutral wire for operation.
- Tamper-resistant outlets prevent foreign objects from being inserted into individual slots.
2. Product Overview
The Enbrighten In-Wall Z-Wave Tamper-Resistant Smart Receptacle provides intelligent control over your plug-in devices, integrating seamlessly into your Z-Wave smart home system.
Key Features:
- Z-Wave Control: Wirelessly operate lamps, fans, and small appliances.
- Dual Outlets: Features one Z-Wave controlled outlet and one always-on outlet.
- Tamper-Resistant: Enhanced safety feature, ideal for homes with children or pets.
- Voice Control Compatible: Works with Amazon Alexa and Google Assistant (requires compatible Z-Wave hub).
- 700 Series Z-Wave: Offers enhanced security (S2) and faster pairing (SmartStart).
- Quick-Change Faceplate: Includes white and light almond faceplates to match your decor.
Image: Enbrighten Z-Wave Plus Smart Receptacle with its packaging, highlighting key features like Z-Wave Plus, mobile/voice control, and included faceplates.
Image: A close-up view of the installed smart receptacle, indicating the 'Always on' and 'Z-Wave controlled' outlets, and the tamper-resistant feature.
Image: Icons illustrating the versatile compatibility of the smart outlet with various devices, including LED, CFL, incandescent, halogen bulbs, fans, and lamps.
3. Setup and Installation
This device is designed for in-wall installation and requires hardwired connections, including a neutral wire. If you are unsure about any part of these instructions, consult a qualified electrician.
Installation Steps:
- Turn Off Power: Before beginning, turn OFF the power to the circuit at the circuit breaker or fuse box.
- Remove Old Outlet: Carefully remove the existing wall plate and outlet from the wall box.
- Identify Wires: Identify the Line (Hot), Neutral, and Ground wires. A neutral wire is required for this device.
- Wire Connections: Connect the wires to the new Enbrighten Smart Receptacle according to the wiring diagram. Ensure all connections are tight and secure.
- Line (Hot) wire to the Line terminal.
- Neutral wire to the Neutral terminal.
- Ground wire to the Ground terminal.
- Mount Outlet: Carefully push the wired outlet into the wall box. Secure it with the mounting screws.
- Attach Faceplate: Attach the desired quick-change faceplate (white or light almond) to the outlet. Wallplate sold separately.
- Restore Power: Turn the power back ON at the circuit breaker.
Image: Detailed diagram showing the wiring terminals (Line, Neutral, Ground) and precise dimensions of the Enbrighten Smart Receptacle for installation planning.
Z-Wave Pairing:
- Add Device to Hub: Follow your Z-Wave hub's instructions to add a new device.
- Initiate Pairing: Press the button on the smart receptacle to initiate the pairing process. Refer to your hub's manual for specific pairing modes (e.g., inclusion, SmartStart).
- Confirmation: The hub will confirm successful pairing. The LED indicator on the outlet may change status.
4. Operation
Once installed and paired with your Z-Wave hub, the Enbrighten Smart Receptacle can be controlled locally or remotely.
Local Control:
- The Z-Wave controlled outlet can be manually turned ON/OFF by pressing the small button located between the two outlets.
- The always-on outlet provides continuous power for traditional use and is not controlled by Z-Wave or the button.
Remote Control (via Z-Wave Hub):
- Use your Z-Wave hub's mobile application or web interface to turn the Z-Wave controlled outlet ON/OFF from anywhere.
- Set schedules, timers, and create custom scenes for automated control of connected devices.
- Integrate with voice assistants like Amazon Alexa or Google Assistant through your Z-Wave hub for hands-free control.
Image: A family enjoying a movie night, demonstrating the use of voice commands with Alexa to set customized scenes and schedule timed events for smart home lighting.
5. Maintenance
The Enbrighten Smart Receptacle requires minimal maintenance.
- Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the wall plate is securely fastened and free from damage.
- Periodically check for any loose wiring connections, especially if the device is experiencing intermittent issues.
6. Troubleshooting
If you experience issues with your Enbrighten Smart Receptacle, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not responding to Z-Wave commands. | Not properly paired with hub, out of range, or network issue. | Verify pairing status with your hub. Try re-pairing the device. Ensure the device is within range of your Z-Wave network or a repeater. |
| LED indicator is off or blinking unexpectedly. | Power issue, device error, or LED setting. | Check power at the circuit breaker. Ensure wiring is correct. Consult your hub's settings for LED indicator configuration. |
| Cannot manually turn ON/OFF the controlled outlet. | Internal fault or wiring issue. | Turn off power at the breaker, check wiring connections. If issue persists, contact customer support. |
| Outlet feels warm. | Normal operation or overload. | Slight warmth is normal. If it's excessively hot, immediately disconnect the load and check for overload or short circuit. Do not exceed maximum load ratings. |
For further assistance, please refer to your Z-Wave hub's user manual or contact Enbrighten customer support.
7. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 58449 |
| Series | 700 Series |
| Connectivity Protocol | Z-Wave |
| Control Method | App, Voice |
| Item Dimensions (L x W x H) | 2.6 x 3.1 x 6.15 inches |
| Item Weight | 6 ounces |
| Color | White & Light Almond |
| Mounting Type | Wall Mount |
| Contact Type | Normally Open |
| Operation Mode | ON-NONE-ON |
| Manufacturer | Jasco Products Company |
| UPC | 030878584494 |
8. Warranty and Support
Enbrighten products are backed by a limited warranty. For detailed warranty information, product registration, or technical support, please visit the official Enbrighten website or contact their customer service directly. Keep your purchase receipt for warranty claims.
Online Support: Refer to the Enbrighten official website for FAQs, video tutorials, and additional resources.
Contact Information: Please refer to the contact details provided in the product packaging or on the manufacturer's website for customer service.
