SKYSHL SS315T-2A1 OTDR Tester User Manual

1. Introduction

The SKYSHL SS315T-2A1 is a comprehensive Optical Time Domain Reflectometer (OTDR) designed for testing single-mode fiber optic networks. It integrates multiple essential functions for fiber optic analysis and maintenance, including OTDR, Optical Power Meter (OPM), Optical Light Source (OLS), and Visual Fault Locator (VFL. The device also features an Event Map and APP connectivity for enhanced usability and data management.

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your SS315T-2A1 OTDR Tester to ensure optimal performance and longevity.

2. Safety Information

Please read and understand all safety warnings and instructions before operating the device. Failure to do so may result in injury or damage to the equipment.

• Eye Safety: Never look directly into the fiber optic output ports or into a fiber connected to an active light source. Invisible laser radiation can cause severe eye damage.
• Power Supply: Use only the original power adapter provided with the device. Using an incompatible adapter may damage the device or pose a fire hazard.
• Battery Safety: Do not disassemble, puncture, or expose the battery to extreme temperatures. Dispose of batteries according to local regulations.
• Cleaning: Ensure the device is powered off and disconnected from any power source before cleaning. Use a soft, dry cloth. Do not use liquid cleaners.
• Environment: Operate the device within the specified environmental conditions (temperature, humidity) to prevent malfunction.

3. Product Features

• Dual Wavelength & Dynamic Range: 1310nm + 1550nm wavelengths with 32dB + 30dB dynamic range, supporting a maximum test distance of up to 120km.
• Integrated Functions: Combines four core optical test instruments: Optical Time Domain Reflectometer (OTDR), Visual Fault Locator (VFL - 650nm, 10km), Optical Power Meter (OPM - 850nm~1650nm, -60~+3dB), and Optical Light Source (OLS - 1310nm+1550nm).
• Short Dead Zones: Utilizes advanced optical technology to provide an event dead zone (EDZ) of 1.2m (typical SM) and an attenuation dead zone (ADZ) of 4.5m (typical SM), enabling testing of very short fiber links.
• Smart & Durable Design: Features automatic test functions, test appointments, and an Event Map for simplified operation. Smart APP (Android only) and Windows software support real-time viewing, sharing, analysis, and saving of test data.
• Broad Connector Compatibility: Compatible with SC/UPC, ST/UPC, FC/UPC, LC/UPC, SC/APC, ST/APC, FC/APC, and LC/APC connectors. Includes 2 fiber patch cords (1*SM FC/UPC-FC/UPC + 1*SM FC/UPC-FC/APC) and FC-SC, FC-ST, FC-FC, FC-LC connectors.

4. Setup

4.1 Package Contents

Verify that all items are present in the package:

• 1 x SKYSHL SS315T-2A1 OTDR Tester
• 1 x Power Adapter (AC 100-240V)
• 1 x USB Cable
• 1 x USB Flash Drive
• 1 x Backpack for transport
• 1 x Stand
• 2 x Fiber Patch Cords (1*SM FC/UPC-FC/UPC, 1*SM FC/UPC-FC/APC)
• Multiple Connectors (FC-SC, FC-ST, FC-FC, FC-LC)
• User Manual (this document)

Figure 1: Package Contents

4.2 Charging the Device

Before first use, fully charge the device. Connect the power adapter to the charging port on the device and plug it into a standard AC outlet (100-240V). The device uses a 11.1V/3250mAh Lithium battery.

4.3 Connecting Fiber Optic Cables

The SS315T-2A1 supports various fiber optic connectors. Use the appropriate adapter for your fiber type (SC, FC, ST, LC, UPC, APC).

• Identify the correct port on the OTDR for the function you intend to use (e.g., OTDR, VFL/OPM).
• Clean the fiber end-face and the adapter port thoroughly before connection.
• Gently insert the fiber connector into the adapter port until it clicks into place. Avoid excessive force.

Figure 2: Fiber Optic Connector Ports (SC, FC, ST, LC)

5. Operating Instructions

5.1 Power On/Off

• Power On: Press and hold the power button until the screen illuminates and the device starts up.
• Power Off: Press and hold the power button until a shutdown prompt appears, then confirm to power off.

5.2 Main Interface Overview

Upon startup, the device displays the main menu with various function icons:

Figure 3: Main Menu Interface

• OTDR: Optical Time Domain Reflectometer for fiber characterization.
• OPM: Optical Power Meter for measuring optical power.
• OLS: Optical Light Source for providing stable light.
• Server: For data transfer and remote access.
• VFL: Visual Fault Locator for identifying fiber breaks and bends.
• File: For managing saved test data.
• Help: Access to on-device help and guides.
• System: Device settings and configurations.

5.3 OTDR Function

The OTDR function is used to characterize fiber optic cables. Follow these steps:

• From the main menu, tap the 'OTDR' icon.
• Set Parameters: Access the settings to configure wavelength (1310nm or 1550nm), range (e.g., 32km, 128km), pulse width, and test mode (Auto/Manual).

Figure 4: OTDR Settings Interface

• Perform Test: Once parameters are set, initiate the test. The device will send light pulses into the fiber and analyze the reflected signals.
• Analyze Results: The test results will be displayed as a graphical curve and an Event Map. The curve shows attenuation and reflection events along the fiber, while the Event Map provides a simplified, icon-based view of these events.

Figure 5: 1310nm and 1550nm Graphics Analysis

Figure 6: Test Curve and Event Type Diagram

5.4 OPM, OLS, and VFL Functions

These integrated tools are accessible from the main menu:

Figure 7: Integrated OTDR, OPM, OLS, and VFL

• OPM (Optical Power Meter): Select the OPM icon, choose the desired wavelength, and connect the fiber to measure optical power.
• OLS (Optical Light Source): Select the OLS icon, choose the desired wavelength (1310nm or 1550nm), and connect the fiber to provide a stable light source for testing.
• VFL (Visual Fault Locator): Select the VFL icon. A visible red laser (650nm) will be emitted from the VFL port. Connect the fiber to visually locate breaks, macro-bends, or poor splices.

5.5 File Management and Data Transfer

The device allows you to save, read, and transfer test data.

• From the main menu, tap the 'File' icon.
• You can 'Read' previously saved test curves and event maps from the device's memory or a connected USB flash drive.
• To 'Save' current test results, select the 'Save' option and follow the on-screen prompts.
• To 'Transfer' files (e.g., .EI or .SOR files) to or from a USB flash drive, select the 'Transfer' option.

5.6 System Settings and APP Connectivity

Access the 'System' icon from the main menu to configure device settings.

Figure 8: Network Settings

• Network Settings: Configure IP address, Gateway, and Mask. Connect to Wi-Fi networks.
• Bluetooth: Enable or disable Bluetooth for wireless connectivity.
• Language: Change the device's display language.
• Smart APP: The SS315T can connect to Android phones/tablets (Android only) and PCs via the Smart APP and Windows software. This allows for viewing, sharing, analyzing, and saving test curves in real-time.

Figure 9: Smart APP and Windows Software Connectivity

6. Maintenance

• Cleaning Fiber Connectors: Regularly clean all fiber optic connectors and adapters using lint-free wipes and appropriate cleaning solutions to prevent contamination and ensure accurate measurements.
• Device Cleaning: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning the exterior and screen.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge it to approximately 50-70% and store in a cool, dry place.
• Software Updates: Check for available software updates periodically to ensure optimal performance and access to new features. Updates can typically be found on the manufacturer's support website.

7. Troubleshooting

If you encounter issues with your SS315T-2A1, refer to the following common troubleshooting steps:

• Device Not Powering On: Ensure the battery is charged. Connect the device to the power adapter and try again. If the issue persists, contact support.
• Inaccurate Readings: Clean all fiber connectors and adapters. Ensure the correct test parameters (wavelength, range, pulse) are selected for your fiber type. Verify the fiber is not damaged.
• Connectivity Issues (APP/PC): Ensure Wi-Fi or Bluetooth is enabled and correctly configured. For PC connection, ensure the correct drivers are installed.
• Screen Unresponsive: Try restarting the device. If the screen remains unresponsive, contact support.

For more detailed troubleshooting, refer to the 'Help' section on the device or the online resources.

8. Specifications

9. Warranty and Support

9.1 Warranty Information

The SKYSHL SS315T-2A1 OTDR Tester comes with a comprehensive warranty:

• 3 years free replacement
• 5 years free maintenance
• Lifetime warranty

Please retain your proof of purchase for warranty claims.

9.2 Technical Support

For technical assistance, software downloads, or additional resources, please visit the official SKYSHL support website or contact customer service. A dedicated folder for SS315T resources, including software and manuals, can be found at: https://www.mediafire.com/folder/dw7tpy3vk59xc/SS315T