Introduction
This manual provides essential information for the assembly, safe use, and maintenance of your VINGLI 25.6" Rattan Coffee Table. Please read these instructions carefully before assembly and retain them for future reference.
The VINGLI Rattan Coffee Table features a sturdy metal frame with an imitation wood grain veneer, offering reliable support and a natural aesthetic. Its innovative design combines water-wave glass with imitation rattan elements, creating an elegant and modern appearance. The double-layer design provides ample storage, helping to keep your living space organized. Its compact size makes it suitable for various indoor settings, including living rooms, studies, or balconies, optimizing space utilization.
Image: The VINGLI Rattan Coffee Table, featuring a clear water-wave glass top and a woven rattan lower shelf, positioned in a modern living room.
Safety Information
- Assembly may require tools and caution. Always follow the assembly instructions carefully.
- Do not exceed the maximum weight recommendation of 24.95 kilograms (approximately 55 lbs) for the table. Overloading can cause damage or injury.
- Ensure all components are securely fastened before use. Regularly check for loose screws or damaged parts.
- Keep small parts away from children during assembly to prevent choking hazards.
- Place the table on a flat, stable surface to prevent tipping.
Parts List
Please refer to the included assembly guide for a complete and detailed list of all parts and hardware. Ensure all components are present and undamaged before beginning assembly.
Image: An exploded view of the coffee table components, illustrating the metal frame, glass top, and rattan shelf before assembly.
Assembly Instructions
The assembly process for this coffee table is designed to be quick and straightforward, typically requiring only one person. An assembly guide is included with your product. Follow these general steps:
- Unpack all components and verify against the parts list in your assembly guide.
- Begin by attaching the legs to the frame. Ensure proper alignment of all holes.
- Important: Do not fully tighten all bolts until the entire structure is assembled. Leave some wiggle room to allow for alignment of subsequent parts, especially when attaching the top and bottom shelves.
- Carefully place the rattan lower shelf onto the designated supports.
- Position the water-wave glass top onto the upper frame.
- Once all parts are in place and aligned, gradually tighten all bolts securely.
Image: Detail of the table's construction, highlighting the water-wave tempered glass and the robust metal frame supporting the two tiers.
Usage Guidelines
This VINGLI Rattan Coffee Table is designed for indoor use and is ideal for various living spaces. It serves as a functional and decorative piece for:
- Dining: Suitable for light meals or snacks.
- Decorating: Displaying decorative items, books, or plants.
- Socializing: Providing a central surface for gatherings.
- Storage: The two-tier design offers convenient storage for magazines, remote controls, or other small items, helping to maintain an organized environment.
The compact size is particularly beneficial for small spaces, such as apartments or sunrooms, maximizing available floor area.
Maintenance and Care
To ensure the longevity and appearance of your coffee table, follow these care instructions:
- Cleaning: Wipe the table surfaces with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish or glass.
- Spills: Promptly clean any spills to prevent stains, especially on the rattan and wood grain veneer.
- Heat Protection: Use coasters under hot beverages or dishes to protect the glass and veneer surfaces.
- Sunlight Exposure: Avoid prolonged direct sunlight exposure to prevent fading or damage to the wood grain veneer.
- Weight Distribution: Distribute weight evenly across the table surfaces and do not exceed the maximum weight capacity.
Troubleshooting
Difficulty Aligning Parts During Assembly:
If you encounter difficulty aligning screw holes or fitting components together, ensure that all bolts are only partially tightened during the initial assembly steps. This allows for flexibility to adjust parts as needed. Once all components are loosely assembled and aligned, then proceed to fully tighten all bolts.
Table Wobbles After Assembly:
Check that all screws and bolts are fully tightened. Ensure the table is placed on a level surface. If wobbling persists, loosen all screws slightly, gently press down on the table to ensure it's level, and then re-tighten all screws.
Scratches on Floor:
The table legs are equipped with leg pads for noise reduction and floor protection. Ensure these pads are intact and properly positioned. If missing or damaged, replacement pads may be required.
Specifications
| Feature | Detail |
|---|---|
| Brand | VINGLI |
| Model Name | Rattan Coffee Table |
| Product Dimensions (D x W x H) | 25.6"D x 25.6"W x 18.9"H |
| Item Diameter | 25.6 Inches |
| Tabletop Thickness | 0.4 Inches |
| Maximum Weight Recommendation | 24.95 Kilograms (approx. 55 lbs) |
| Frame Material | Glass, Metal, Wood |
| Top Material Type | Glass |
| Furniture Finish | Veneer, wooden grain |
| Color | Waterwave-round Rattan Walnut |
| Shape | Round |
| Style | Modern |
| Number of Shelves | 1 (lower rattan shelf) |
| Required Assembly | Yes |
| Recommended Number of People for Assembly | 1 |
| Indoor/Outdoor Usage | Indoor |
| Product Care Instructions | Wipe with Dry Cloth |
Image: Technical drawing illustrating the dimensions (25.6" diameter, 18.5" height) and weight capacities (55 lbs top, 22 lbs bottom) of the coffee table.
Warranty and Support
This product is covered by a 30-Day return policy. During this period, the shipping cost for return and replacement will be covered if the item is defective, damaged, has missing parts, or encounters assembly problems. As this product is fulfilled by a Merchant, for any other reasons beyond quality issues, you may need to return the item at your own expense.
Products must be returned in their original packaging and shipped within 30 days of delivery. Please inform the seller once the product has been shipped back to process your refund promptly. The refund will be applied to your account after deducting any necessary return freight (if applicable), and you can expect to receive it within 1-3 business days.
For further assistance or inquiries, please contact VINGLI customer support through the platform where the purchase was made.
