iFamily Camera Wall Mount Kit (Model WMK01) Instruction Manual

1. Introduction

This instruction manual provides detailed guidance for the safe and proper installation and use of the iFamily Camera Wall Mount Kit, Model WMK01. This mount is designed to securely hold compatible iFamily baby monitors (SM43E, SM653, SM936E) on a wall, providing an optimal viewing angle for monitoring your child.

Please read this manual thoroughly before installation and retain it for future reference.

2. Package Contents

Verify that all items listed below are present in your package:

• 1x iFamily Camera Wall Mount (Model WMK01)
• 1x Hardware Kit (includes screws and wall anchors)

Image: The iFamily Camera Wall Mount (black circular piece) and the accompanying hardware kit (screws and wall anchors in a clear plastic bag).

3. Safety Information

• Ensure the mounting surface is structurally sound and can support the weight of the camera and mount.
• Keep all small parts (screws, anchors) out of reach of children to prevent choking hazards.
• Do not overtighten screws, as this may damage the mount or the wall.
• Position the camera and its power cord at least 3 feet (1 meter) away from the crib or playpen to prevent strangulation hazards.
• If you are unsure about installation, consult a qualified professional.

4. Setup and Installation

Follow these steps to properly install your iFamily Camera Wall Mount:

1. Choose a Location: Select a wall location that provides an optimal view of the area you wish to monitor. Ensure it is within reach of a power outlet for your baby monitor and at a safe distance from the crib.
2. Mark Drill Holes: Hold the wall mount against the chosen wall location. Use a pencil to mark the positions for the two screw holes.
3. Drill Pilot Holes: Using an appropriate drill bit (typically 6mm or 1/4 inch for standard wall anchors), drill pilot holes at the marked positions.
4. Insert Wall Anchors: Gently tap the plastic wall anchors into the drilled holes until they are flush with the wall surface. (This step is crucial for drywall or plaster walls. For wood studs, anchors may not be necessary, but ensure screws are securely fastened).
5. Attach the Mount: Align the wall mount with the inserted anchors (or pilot holes if mounting directly into a stud). Insert the screws through the mount's holes and tighten them with a screwdriver until the mount is firmly secured to the wall. Do not overtighten.
6. Attach the Camera: The iFamily baby monitor (SM43E, SM653, SM936E) has a threaded insert on its base. Align this insert with the screw on the wall mount. Rotate the camera clockwise onto the mount until it is securely fastened.
7. Adjust Camera Angle: Once the camera is attached, you can adjust its angle by gently rotating or tilting it on the mount to achieve the desired viewing perspective.

5. Operating Instructions

The iFamily Camera Wall Mount is a passive accessory designed to hold your baby monitor. Its operation is limited to providing a stable and adjustable platform.

• Angle Adjustment: The mount allows for manual adjustment of the camera's vertical and horizontal angle. Gently pivot the camera to achieve the desired field of view.
• Security: Ensure the camera is always securely screwed onto the mount to prevent accidental falls.

6. Maintenance

• Cleaning: Wipe the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Periodic Check: Periodically check that the mount is still securely fastened to the wall and that the camera is tightly attached to the mount.

7. Troubleshooting

• Mount feels loose on the wall:
  • Ensure screws are tightened properly.
  • Verify that wall anchors were used correctly for drywall/plaster.
  • If mounting into a stud, ensure screws are long enough to penetrate securely.
• Camera does not attach securely to the mount:
  • Ensure the camera's base has a compatible threaded insert.
  • Rotate the camera clockwise until it is snug. Do not force it.
  • Confirm your camera model is one of the compatible models (SM43E, SM653, SM936E).

8. Specifications

9. Warranty and Support

For warranty information or technical support regarding your iFamily Camera Wall Mount, please refer to the contact information provided with your iFamily baby monitor or visit the official iFamily website. Please have your product model number (WMK01) and purchase details ready when contacting support.

For additional assistance, you may visit the iFamily Store on Amazon.