1. Introduction
Thank you for choosing the AEG FSB34707Z Integrated Dishwasher. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your appliance. Please read this manual thoroughly before using the dishwasher for the first time and keep it for future reference.
2. Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Ensure the appliance is properly grounded.
- Do not operate the dishwasher if it has a damaged power cord or plug.
- Keep children and pets away from the appliance during operation.
- Use only detergents and rinse aids specifically designed for dishwashers.
- Do not open the door during operation, especially during the hot wash cycle.
- Sharp items should be loaded with handles up to reduce the risk of cuts.
- Disconnect the appliance from the power supply before cleaning or maintenance.
3. Setup and Installation
The AEG FSB34707Z is an integrated dishwasher designed to be built into your kitchen cabinetry. Professional installation is recommended to ensure proper fit and function.
3.1 Unpacking
Carefully remove all packaging materials. Inspect the dishwasher for any damage incurred during transit. Report any damage to your retailer immediately.
Figure 3.1: Front view of the AEG FSB34707Z integrated dishwasher. This image shows the appliance with its white panel, designed to be seamlessly integrated into kitchen furniture. The top part of the door is slightly open, revealing the control panel and the upper spray arm.
3.2 Positioning
Choose a location near a water supply, drain, and electrical outlet. Ensure the floor is level and capable of supporting the weight of the dishwasher when fully loaded.
3.3 Electrical Connection
This appliance operates on 230 Volts. Ensure the electrical supply meets the requirements specified on the rating plate. The product comes with an EU plug. Always connect to a properly grounded outlet.
3.4 Water Supply and Drain Connection
Connect the water inlet hose to a cold water supply with a minimum pressure of 0.04 MPa and a maximum of 1 MPa. Connect the drain hose to a suitable drain pipe, ensuring there are no kinks or blockages.
4. Operating Instructions
Familiarize yourself with the control panel and available programs before first use.
4.1 Control Panel
The dishwasher features an integrated display and touch control for easy program selection and monitoring. The display type is LED.
4.2 Loading the Dishwasher
Load dishes according to the manufacturer's recommendations for optimal cleaning and drying. Ensure spray arms can rotate freely.
Figure 4.2: Interior view of the AEG FSB34707Z integrated dishwasher. This image provides a glimpse inside the dishwasher, highlighting the arrangement of the racks, the cutlery basket, and the spray arms, demonstrating the capacity for efficient loading.
4.3 Adding Detergent and Rinse Aid
Fill the detergent dispenser with the appropriate amount of dishwasher detergent. Check the rinse aid indicator and refill as needed to ensure streak-free drying.
4.4 Program Selection
The dishwasher offers 5 wash programs and 5 cycle options. Select the program best suited for your load. An "Economic" option is available for energy-efficient washing.
4.5 Starting a Wash Cycle
Close the dishwasher door firmly. Select your desired program using the touch controls and press the start button. The integrated display will show the cycle status.
4.6 Automatic Shut-off and Extra Drying Function
The appliance features an automatic shut-off for energy saving. It also includes an extra drying function for enhanced drying performance.
5. Maintenance and Cleaning
Regular maintenance ensures optimal performance and extends the life of your dishwasher.
5.1 Cleaning the Filters
The filter system should be cleaned regularly to prevent food particles from clogging the spray arms and affecting wash performance. Refer to the diagram in your appliance for filter removal and cleaning instructions.
5.2 Cleaning the Spray Arms
Periodically check the spray arm nozzles for blockages and clean them if necessary.
5.3 Exterior and Interior Cleaning
Wipe the exterior with a damp cloth. Clean the interior with a dishwasher cleaner or a mixture of vinegar and baking soda to remove odors and mineral buildup.
6. Troubleshooting
Before contacting service, refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher does not start | Power supply issue, door not closed properly, program not selected. | Check power connection, ensure door is latched, select a program and press start. |
| Dishes not clean | Clogged filters, improper loading, insufficient detergent, spray arms blocked. | Clean filters, reload dishes correctly, add more detergent, ensure spray arms rotate freely. |
| Water not draining | Clogged drain hose or filter, drain pump issue. | Check and clear drain hose/filter. If problem persists, contact service. |
| Excessive noise (44 dB normal) | Improper loading, foreign object in pump, leveling issue. | Adjust loading, check for foreign objects, ensure dishwasher is level. |
7. Specifications
Detailed technical specifications for the AEG FSB34707Z Integrated Dishwasher.
Figure 7.1: Energy label for the AEG FSB34707Z dishwasher. This label indicates the appliance's energy efficiency class C, energy consumption of 75 kWh per 100 cycles, capacity for 14 place settings, water consumption of 10.5 liters per cycle, and a noise level of 44 dB.
| Feature | Value |
|---|---|
| Model Name | FSB34707Z |
| Product Weight | 60 Kilograms |
| Voltage | 230 Volts |
| Cycle Options | Economic |
| Display Type | LED |
| Number of Settings | 5 |
| Number of Cycles | 5 |
| Product Dimensions | 1 x 1 x 1 cm; 60 kg (Note: These dimensions appear to be placeholder values from the source data.) |
| Installation Type | Integrated |
| Special Feature | Extra drying function |
| Controls Type | Push Button |
| Material | Steel Alloy |
| Noise Level | 44 dB |
| Included Components | Adapter |
| Energy Efficiency Class | C |
8. Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your appliance or visit the official AEG website. Keep your proof of purchase for any warranty claims.
For further assistance, you may contact AEG customer service through their official channels. Always provide your model number (FSB34707Z) and serial number when seeking support.
