Rhinowalk MT21620

Rhinowalk Motorcycle Tail Bag 20L Instruction Manual

Model: MT21620

Introduction

Thank you for choosing the Rhinowalk Motorcycle Tail Bag 20L. This manual provides essential information for the proper installation, use, and care of your new motorcycle luggage. Please read these instructions carefully before using the product to ensure safety and optimal performance.

Product Overview

The Rhinowalk Motorcycle Tail Bag 20L is designed for motor travel, offering waterproof storage and versatile mounting options. Key features include:

  • Capacity: 20 liters, with dimensions of 26cm (width) x 18cm (depth) x 59cm (height) when unrolled. Weight: 1050g.
  • Waterproof Design: Features a full waterproof inner bag with a detachable zipper, ensuring contents remain dry in wet conditions. The main closure is a roll-top design.
  • Modular System: Designed for free combination with other Rhinowalk bags (10L, 20L, 30L) using buckles and hooks, allowing for 2-in-1, 3-in-1, or 4-in-1 configurations.
  • Versatile Usage: Can be used as a motorcycle pannier bag, fuel tank bag, shoulder bag, or backpack with the included shoulder straps.
  • Additional Features: Anti-slip mesh bag for hanging wet clothes, waterproof zippers, robust brand buckles, webbing for attaching additional items, and a silver reflective logo for enhanced night visibility.
Rhinowalk Motorcycle Tail Bag 20L, front view

Image: Front view of the Rhinowalk Motorcycle Tail Bag 20L, showcasing its sleek design and multiple attachment points.

Rhinowalk Motorcycle Tail Bag 20L dimensions

Image: Dimensions of the 20L Rhinowalk Motorcycle Tail Bag, showing approximate measurements of 26cm width, 18cm depth, and 40cm height when rolled.

Rhinowalk Motorcycle Tail Bag 20L included accessories

Image: Included accessories for the 20L bag: 4 buckles, 4 bands, and 2 shoulder straps for versatile mounting and carrying options.

Setup and Installation

The Rhinowalk Motorcycle Tail Bag can be installed in various configurations. Ensure all straps and buckles are securely fastened before riding.

Single Bag Installation:

  1. Position the tail bag on your motorcycle's rear rack or passenger seat.
  2. Use the provided bands and buckles to secure the bag to the motorcycle. Thread the bands through the attachment points on the bag and around stable parts of your motorcycle (e.g., frame, rack).
  3. Tighten all straps to ensure the bag is stable and does not shift during travel.
Single Rhinowalk Motorcycle Tail Bag installation steps

Image: Step-by-step guide for installing a single Rhinowalk Motorcycle Tail Bag on a rear rack using straps and buckles.

Modular Combination Installation:

For combining multiple bags (e.g., 2-in-1, 3-in-1, 4-in-1), use the integrated buckles and hooks to connect bags together before securing them to the motorcycle.

  1. Connect the desired bags using the side buckles and hooks. Ensure they are firmly linked.
  2. Place the combined unit on the motorcycle.
  3. Utilize the longer straps and additional buckles (if provided with larger combinations) to secure the entire modular setup to the motorcycle, distributing weight evenly.
Two Rhinowalk Motorcycle Tail Bags combined installation

Image: Illustration of combining two Rhinowalk bags (e.g., 10L and 20L) and securing them to a motorcycle.

Three Rhinowalk Motorcycle Tail Bags combined installation

Image: Illustration of combining three Rhinowalk bags (e.g., 20L, 30L, 20L) and securing them to a motorcycle.

Four Rhinowalk Motorcycle Tail Bags combined installation

Image: Illustration of combining four Rhinowalk bags (e.g., 10L, 20L, 20L, 30L) and securing them to a motorcycle.

Rhinowalk Motorcycle Tail Bag 20L mounted on a motorcycle

Image: The Rhinowalk Motorcycle Tail Bag 20L securely mounted on the rear rack of a motorcycle, demonstrating a typical installation.

Operating Instructions

Packing the Bag:

  • Utilize the main compartment for larger items. The detachable waterproof inner bag provides an extra layer of protection for sensitive items.
  • For waterproof sealing, roll the top closure down tightly at least three times before securing the side buckles.
  • The anti-slip mesh bag on the exterior is suitable for items that can get wet or need quick access, such as gloves or a water bottle.
Rhinowalk Motorcycle Tail Bag 20L internal capacity

Image: View of the bag's interior, showing its capacity to hold items like a laptop, tablet, camera, and water bottle.

Rhinowalk Motorcycle Tail Bag 20L waterproof inner bag details

Image: Close-up of the detachable waterproof inner bag, highlighting the zipper and voltage waterproof glue strip at the seam for enhanced water resistance.

Rhinowalk Motorcycle Tail Bag 20L anti-slip mesh bag

Image: The anti-slip mesh bag on the side of the tail bag, shown holding a towel and other small items.

Carrying Options:

  • Shoulder Bag/Backpack: Attach the two included shoulder straps to the designated D-rings on the bag to convert it into a shoulder bag or backpack for off-bike carrying.
Rhinowalk Motorcycle Tail Bag 20L worn as a backpack

Image: A person wearing the Rhinowalk Motorcycle Tail Bag 20L as a backpack, demonstrating its alternative carrying method.

Maintenance

  • Cleaning: Wipe the exterior with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners. For the inner bag, it can be detached and rinsed if necessary.
  • Drying: Allow the bag to air dry completely before storage, especially after exposure to rain, to prevent mold or mildew.
  • Storage: Store the bag in a cool, dry place away from direct sunlight when not in use.
  • Inspection: Regularly check all buckles, straps, and zippers for signs of wear or damage. Replace any damaged components to maintain security and functionality.

Troubleshooting

  • Water Leakage: Ensure the roll-top closure is rolled down at least three times and the side buckles are securely fastened. Check the waterproof inner bag for any tears or damage.
  • Bag Shifting During Ride: Re-check all attachment straps. Ensure they are tightened sufficiently and routed correctly around stable points on your motorcycle. Distribute weight evenly inside the bag.
  • Difficulty with Zippers: If zippers are stiff, apply a small amount of silicone lubricant. Avoid forcing stuck zippers.

Specifications

FeatureDetail
Model NumberMT21620
Capacity20 Liters
Dimensions (L x W x H)10.24" x 7.09" x 23.23" (26cm x 18cm x 59cm)
Weight1050 Grams
MaterialPolyester
ColorBlack
Closure TypeRoll-top, Zipper
Mounting TypeRack Mount
Handle TypeShoulder strap (x2)
Rhinowalk Motorcycle Tail Bag product information table

Image: A table summarizing product information for 10L, 20L, and 30L models, including dimensions, weight, and material.

Official Product Video

Video: Official Rhinowalk Factory video demonstrating the "motor pannier bag" features and usage. This video provides a visual guide to the bag's functionality and installation.

Warranty and Support

Rhinowalk products are designed for durability and performance. For any questions regarding your Rhinowalk Motorcycle Tail Bag 20L, or for warranty claims, please contact Rhinowalk customer support through their official channels or the retailer where the product was purchased.

For more information, visit the official Rhinowalk Store: Rhinowalk Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.