Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your SpeaKa Professional SP-TVC-1000 Dual TV Mobile Cart. This mobile cart is designed to securely hold two televisions ranging from 32 to 65 inches, offering height adjustability for optimal viewing. Please read this manual thoroughly before installation and use to ensure safe and correct operation.
Safety Instructions
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or faulty.
- Assembly should be performed by at least two people to prevent injury or damage.
- Do not exceed the maximum weight capacity specified for the cart and TV mounts.
- Always lock the wheels when the cart is stationary to prevent accidental movement.
- Keep children and pets away from the assembly area. Small parts can be a choking hazard.
- Ensure the TV is securely mounted to the brackets before placing it on the cart.
- Avoid placing the cart on uneven surfaces to prevent tipping.
- Do not hang or climb on the cart.
Package Contents
Please verify that all components listed below are included in your package. If any parts are missing or damaged, contact customer support immediately.
- Main support column(s)
- Base with wheels
- TV mounting brackets (2 sets)
- Horizontal support bars
- Hardware kit (screws, washers, spacers, wrenches)
- Instruction Manual
Setup and Assembly
Follow these general steps for assembling your SpeaKa Professional SP-TVC-1000 TV Mobile Cart. Refer to the included assembly diagram for detailed illustrations.
- Attach Wheels to Base: Securely fasten the caster wheels to the base of the cart using the provided hardware. Ensure all wheels are firmly attached and can rotate freely. Lock two of the wheels to prevent movement during subsequent steps.
- Assemble Base and Column: Connect the main support column(s) to the assembled base. Use the appropriate screws and tools to ensure a stable connection.
- Install Horizontal Support Bars: Attach the horizontal support bars to the main column(s) at the desired height. These bars will hold the TV mounting brackets.
- Prepare TV Mounting Brackets: Attach the vertical TV mounting brackets to the back of your televisions. Select the correct screws and spacers that fit your TV's VESA mounting holes. Ensure the brackets are centered and level.
- Mount TVs to Cart: With assistance, carefully lift each television and hook the attached vertical brackets onto the horizontal support bars of the cart. Secure the TVs in place using the safety screws or locking mechanisms provided.
- Final Checks: Verify that all connections are tight and secure. Gently test the stability of the cart and mounted TVs before use.
Figure 1: Fully assembled SpeaKa Professional SP-TVC-1000 Dual TV Mobile Cart, showing two TVs mounted on the height-adjustable column with a stable wheeled base.
Operating Instructions
- Moving the Cart: Unlock all caster wheels before moving the cart. Push the cart slowly and carefully, avoiding sudden stops or turns, especially on uneven surfaces. Re-lock the wheels once the cart is in its desired position.
- Adjusting TV Height: The cart features a height-adjustable column. To adjust the height, loosen the locking mechanisms on the main column, carefully raise or lower the TV assembly to the desired viewing height, and then securely tighten the locking mechanisms. Always ensure both TVs are level after adjustment.
- Cable Management: Utilize any integrated cable management features (e.g., clips, channels) to route and secure TV and power cables, preventing tripping hazards and maintaining a tidy appearance.
Maintenance
- Cleaning: Clean the cart surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight and secure. Re-tighten if necessary.
- Wheel Inspection: Inspect the caster wheels for any debris or damage that might impede smooth movement. Clean or replace as needed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cart is unstable or wobbles. | Loose connections; uneven floor; overloaded. | Check and tighten all screws. Move cart to a level surface. Ensure TV weight is within limits. |
| Difficulty moving the cart. | Wheels are locked; debris in wheels; damaged wheels. | Unlock all caster wheels. Clean any debris from wheels. Replace damaged wheels if necessary. |
| TVs are not level. | Mounting brackets not aligned; height adjustment uneven. | Re-check TV bracket installation. Adjust height carefully, ensuring both sides are even. |
Specifications
- Model: SpeaKa Professional SP-TVC-1000
- Manufacturer Part Number: SP-11437688
- Compatible TV Sizes: 32 - 65 inches (81.3 cm - 165.1 cm)
- TV Capacity: Dual TV mounting
- Features: Height adjustable, Mobile (with caster wheels)
- Brand: SpeaKa Professional
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official SpeaKa Professional website. Keep your proof of purchase for warranty claims.
