Forno Maderno 60-inch 2-Piece Convertible Refrigerator/Freezer Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Forno Maderno 60-inch 2-Piece Convertible Refrigerator/Freezer. Please read these instructions thoroughly before using the appliance and retain them for future reference.

The Forno Maderno 60-inch Convertible Refrigerator/Freezer (Model FFFFD1722-60S) is a versatile appliance designed for built-in installation, offering 27.2 cu.ft. of total capacity. It features a convertible function, allowing each unit to operate as either a refrigerator or a freezer, and incorporates total no-frost technology. The appliance includes elegant glass shelves with silver trim, plastic door balconies, and an internal electronic touch control panel for temperature management. Its VCM door panel and metal back ensure durability, while LED lighting illuminates the interior.

Figure 1: Front view of the Forno Maderno 60-inch 2-Piece Convertible Refrigerator/Freezer. This image displays the appliance with its stainless steel finish and two vertical handles, designed for built-in integration.

2. Safety Information

Important Safety Instructions: To reduce the risk of fire, electric shock, or injury when using your appliance, follow these basic precautions:

• Read all instructions before using the appliance.
• Connect to properly grounded outlets only.
• Do not repair or replace any part of the appliance unless specifically recommended in this manual. All other servicing should be referred to a qualified technician.
• Before cleaning or performing any maintenance, unplug the appliance from the power outlet.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Setup and Installation

3.1 Unpacking

Carefully remove all packaging materials. Ensure all components are present and undamaged. Retain packaging for potential future transport or service needs.

3.2 Location and Placement

This appliance is designed for built-in installation. Ensure the chosen location meets the required dimensions and provides adequate ventilation. The product dimensions are approximately 29.7 inches (D) x 59.76 inches (W) x 84 inches (H). Allow sufficient space around the unit for proper air circulation and door opening.

Figure 2: Dimensional diagram of the Forno Maderno 60-inch Convertible Refrigerator/Freezer, indicating its height, width, and depth for proper built-in installation.

3.3 Electrical Connection

Ensure the appliance is connected to a dedicated, grounded electrical outlet with the correct voltage (120 Volts) as specified in the product specifications. Do not use extension cords or adapter plugs.

3.4 Leveling

Level the appliance using the adjustable feet to ensure proper door alignment and efficient operation. An unlevel appliance can affect cooling performance and door sealing.

4. Operating Instructions

4.1 Control Panel Overview

The internal electronic touch control panel allows you to manage the appliance's settings. It typically includes controls for power, temperature adjustment, mode selection (refrigerator/freezer), and special functions like Super Freeze or Energy Saving.

Figure 3: Detailed view of the internal electronic touch control panel, showing buttons for Power, Fridge/Freezer mode, Temperature adjustment, and other functions.

4.2 Convertible Function

Each of the two units can be independently set to operate as either a refrigerator or a freezer. To change the mode:

1. Locate the "Fridge/Freezer" button on the control panel.
2. Press and hold the button for approximately 3 seconds until the display indicates the desired mode (e.g., 'Fridge' or 'Freezer').
3. Allow time for the unit to reach the new operating temperature.

4.3 Temperature Adjustment

To adjust the temperature for each compartment:

1. Press the "TEMP" button to cycle through available temperature settings.
2. The display will show the current temperature. Select your desired temperature.
3. The system will automatically save the setting after a few seconds of inactivity.

You can also switch between Fahrenheit and Celsius using the "F/C" button, typically by pressing and holding for 3 seconds.

4.4 Storage and Organization

The appliance features 8 glass shelves and 6 plastic drawers with silver trim, along with door bins, providing flexible storage options. Arrange items to allow for optimal air circulation.

Figure 4: Interior view of the Forno Maderno appliance with both doors open, showcasing the multiple glass shelves and transparent drawers designed for organized storage.

Figure 5: Example of refrigerator drawers filled with fresh produce, demonstrating the capacity and design for optimal food preservation.

Figure 6: Example of freezer drawers containing various frozen food items, illustrating the storage capabilities when configured as a freezer.

5. Maintenance and Cleaning

5.1 Cleaning the Interior

Before cleaning, unplug the appliance. Clean the interior regularly with a mild detergent and warm water solution. Wipe dry thoroughly. The glass shelves and plastic drawers can be removed for easier cleaning.

5.2 Cleaning the Exterior

The VCM stainless steel door panel can be cleaned with a soft cloth and a non-abrasive stainless steel cleaner. Avoid harsh chemicals or abrasive pads that could scratch the surface. The appliance features a frost-free defrost system, eliminating the need for manual defrosting.

5.3 Power Outages

In case of a power outage, keep the appliance doors closed to maintain internal temperatures for as long as possible. Avoid opening the doors unnecessarily.

6. Troubleshooting

Before contacting customer service, review the following common issues and their potential solutions:

• Appliance does not operate: Check if the power cord is securely plugged into the outlet. Verify the circuit breaker or fuse.
• Temperature is not cold enough: Ensure the temperature setting is appropriate. Check if the doors are fully closed and sealed. Avoid overloading the compartments, which can restrict airflow.
• Unusual noises: Some operational noises are normal (e.g., refrigerant flowing, fan operation). If noises are excessive or unusual, ensure the appliance is level and not touching walls or other objects.
• Excessive frost build-up: Although frost-free, ensure doors are sealing properly and not left open for extended periods.

If the problem persists after checking these points, please contact Forno customer support.

7. Specifications

8. Warranty and Support

For specific warranty details and terms, please refer to the warranty card included with your product or visit the official Forno website. Keep your proof of purchase for warranty claims.

For technical assistance, parts, or service inquiries, please contact Forno customer support. When contacting support, please have your model number (FFFFD1722-60S) and serial number readily available.

You can visit the Forno Store for more information: Forno Official Store