1. Product Overview
The Roborock QX Revo is an advanced robot vacuum and mop combo designed for comprehensive floor cleaning. It features a multifunctional dock for automated maintenance, powerful suction, dual spinning mops, and intelligent navigation capabilities.
Image: The Roborock QX Revo robot vacuum and its accompanying multifunctional dock, along with included accessories such as dust bags, washable filters, and mop cloths.
2. Setup Guide
2.1 Unboxing and Component Check
Carefully remove all components from the packaging. Verify that all items listed in the 'Included Components' section are present.
- Robot Vacuum (1)
- Multifunctional Dock (1)
- Dust Bag (2)
- Washable Filter (2)
- Mop Cloth (8)
- Power Cable (1)
- User Manual (1)
2.2 Dock Placement
Place the multifunctional dock on a hard, flat surface against a wall. Ensure there is adequate clear space around the dock for the robot to maneuver (at least 0.5 meters on both sides and 1.5 meters in front). Connect the power cable to the dock and plug it into a power outlet.
2.3 Initial Charging
Place the robot vacuum onto the charging contacts of the dock. The robot will automatically begin charging. For first-time use, it is recommended to fully charge the robot before its initial cleaning cycle.
2.4 App Installation and Connection
Download the Roborock App from your mobile device's app store. Follow the in-app instructions to connect your QX Revo to your home's 2.4G WiFi network. This will enable full control and access to advanced features.
3. Operating Instructions
3.1 Starting a Cleaning Cycle
Press the power button on the robot or use the Roborock App to start a cleaning cycle. The robot will automatically map your home using PreciSense LiDAR Navigation and begin cleaning.
Image: The Roborock QX Revo robot vacuum demonstrating its PreciSense LiDAR Navigation, creating a precise map of the room for efficient cleaning.
3.2 Cleaning Modes and Features
- Vacuuming: The robot utilizes 5500Pa extreme suction and an all-rubber brush to effectively pick up dust and debris from various floor types.
- Mopping: Dual spinning mops operate at 200 RPM with consistent downward pressure to remove stains. You can customize 30 water flow levels via the app.
- Auto Mop Lifting: Mops automatically lift by 7mm when vacuuming carpets or returning to the dock, preventing wetting carpets and leaving streaks.
- Reactive Tech Obstacle Avoidance: The robot detects and avoids common household obstacles, reducing the need for pre-cleaning.
Image: A cutaway view of the Roborock QX Revo illustrating its powerful 5500Pa suction and the all-rubber brush designed to prevent hair tangles.
Image: The underside of the Roborock QX Revo showing its dual spinning mops, designed for effective stain removal.
Image: The Roborock QX Revo robot vacuum transitioning from a hard floor to a carpet, with an inset showing the 7mm automatic mop lift feature.
Image: The Roborock QX Revo robot vacuum navigating around various household items, demonstrating its Reactive Tech Obstacle Avoidance system.
3.3 App Control and Customization
The Roborock App provides extensive control over your QX Revo:
- Manage Mop Washing and Drying modes.
- Control Auto Emptying settings.
- Adjust suction power and water flow levels.
- Set No-Go Zones and Invisible Walls.
- Schedule cleaning routines for specific rooms or times.
Image: Screenshots of the Roborock mobile application, showing options for setting clean intensity, custom routines, and scheduling room cleaning.
3.4 Voice Control
The QX Revo supports voice control via Amazon Alexa and Siri Shortcuts, allowing for hands-free operation.
- Example command: "Alexa, ask Roborock to clean."
Image: A user interacting with the Roborock QX Revo using voice commands through a smart assistant device, demonstrating the convenience of voice control.
4. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your Roborock QX Revo.
Image: A collage illustrating the key features of the multifunctional dock: self-washing of mops, self-emptying of the dustbin, hot air drying of mops, self-refilling of the water tank, and a detachable base for easy cleaning.
4.1 Multifunctional Dock Maintenance
- Auto Mop Washing: The dock automatically washes the mops during and after cleaning. Periodically check the dirty water tank and empty it as needed.
- Hot Air Drying: After mop washing, the mops are hot air dried to prevent odors. Ensure the drying vents are clear.
- Self-Emptying: The dock automatically empties the robot's dustbin into a disposable dust bag. Replace the dust bag when full (up to 7 weeks of hands-free cleaning).
- Self-Refilling: The dock refills the robot's water tank. Ensure the clean water tank in the dock is filled.
- Detachable Base: The dock base is easily detachable for convenient cleaning of the washing tray and surrounding area.
4.2 Robot Components Maintenance
- Dustbin and Filter: Empty the robot's dustbin after each cleaning cycle if not using auto-emptying. The washable filter should be rinsed with water regularly and air-dried completely before reinstallation. Replace filters as recommended (typically every 3-6 months).
- Main Brush: Remove the main brush and clean any tangled hair or debris. The all-rubber brush is designed to minimize tangles.
- Side Brush: Check the side brush for tangled hair or debris and clean as needed.
- Mop Pads: The mop pads are automatically washed by the dock. For deeper cleaning, remove and hand wash or machine wash them. Replace worn-out mop pads.
- Sensors: Wipe all sensors (cliff sensors, wall sensor, charging contacts) with a soft, dry cloth to ensure proper operation.
5. Troubleshooting
This section addresses common issues you might encounter with your Roborock QX Revo.
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not turn on or charge. | Low battery; charging contacts are dirty; power cable not connected. | Ensure robot is properly docked. Clean charging contacts on both robot and dock. Check power cable connection. |
| Robot cannot connect to Wi-Fi. | Incorrect Wi-Fi password; 5GHz network used; robot too far from router. | Ensure correct 2.4G Wi-Fi password. Move robot closer to router. Reset Wi-Fi on robot and try again. |
| Cleaning performance is poor. | Dustbin full; filter clogged; main brush tangled; mop pads dirty. | Empty dustbin. Clean/replace filter. Clean main brush. Clean/replace mop pads. |
| Robot gets stuck frequently. | Obstacles on floor; cliff sensors dirty. | Clear obstacles from cleaning path. Wipe cliff sensors clean. |
| Dock not performing self-maintenance. | Water tanks empty/full; dust bag full; dock base clogged. | Check clean/dirty water tanks. Replace dust bag. Clean detachable dock base. |
For more detailed troubleshooting, refer to the Roborock App or the official Roborock support website.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | roborock |
| Model Name | QX Revo |
| Special Features | Advanced Custom Cleaning, Auto Mop Washing, Self-Drying, Auto Mop Lifting (7mm), Reactive Tech Obstacle Avoidance, PreciSense LiDAR Navigation |
| Suction Power | 5500Pa |
| Mop Rotation Speed | 200 RPM |
| Battery Life | Up to 180 minutes |
| Water Tank Capacity (Dock) | 5 Liters |
| Control Method | App, Voice (Amazon Alexa, Siri Shortcuts) |
| Connectivity | 2.4G WiFi only |
| Product Dimensions | 24.96"L x 16.77"W x 17.36"H |
| Item Weight | 35.7 pounds |
| Included Components | Robot Vacuum (1), Multifunctional Dock (1), Dust Bag (2), Washable Filter (2), Mop Cloth (8), Power Cable (1), User Manual (1) |
7. Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official Roborock website. For technical support, troubleshooting assistance, or to purchase replacement parts, please contact Roborock customer service through their official channels.
You can often find support resources, FAQs, and contact information on the Roborock Store on Amazon or the main Roborock website.