Voswitch B800 LED Fog Light Kit Instruction Manual

1. Product Overview

The Voswitch B800 LED Fog Light Kit is engineered to enhance visibility and provide robust lighting for your Ford Bronco (2021 and newer) equipped with a modular steel bumper. This comprehensive kit includes all necessary components for installation, offering both spot and spread beam patterns, along with clear and amber lens options for customization.

Key Features:

• CNC Machined Light Housing, Anodic Oxidation Aluminum
• Coated Bracket for durability
• 10W LEDs for bright illumination
• Spot/Spread Beam Combo for versatile lighting
• Includes clear and amber lenses for adaptable use

Package Contents:

Verify that all items listed below are present in your package:

• 8 x S1 LED Light Pods (4 spot beam, 4 spread beam)
• 2 x Mounting Brackets for Modular Steel Bumper
• 4 x Clear Lenses (extra)
• 4 x Amber Lenses (extra)
• Wiring Harnesses and Connectors
• Installation Hardware (bolts, nuts)

Image 1.1: All components of the Voswitch B800 LED Fog Light Kit, including light pods, mounting brackets, and various lenses.

Image 1.2: The Voswitch B800 LED light pods pre-assembled with their mounting brackets.

2. Safety Information

Read all safety warnings and instructions before installing or operating this product. Failure to follow these instructions may result in electrical shock, fire, and/or serious injury.

• Electrical Safety: Always disconnect the vehicle's battery before performing any electrical work. Ensure all wiring connections are secure and properly insulated to prevent short circuits.
• Vehicle Compatibility: This kit is designed for Ford Bronco 2021+ models with a modular steel bumper. Do not attempt to install on incompatible vehicles or bumper types.
• Professional Installation: If you are not experienced with automotive electrical systems or vehicle modifications, it is recommended to seek professional installation.
• Eye Protection: Wear appropriate eye protection during installation to prevent injury from debris or tools.
• Heat: LED lights can generate heat during operation. Avoid touching the light housing immediately after use.

3. Setup and Installation

This section outlines the general steps for installing your Voswitch B800 LED Fog Light Kit. Specific vehicle configurations may vary. Refer to your vehicle's service manual for detailed bumper removal and access procedures if needed.

3.1 Pre-Installation Check:

• Ensure the vehicle is turned off and the battery is disconnected.
• Verify all kit components are present and undamaged.
• Test each LED light pod individually with a 12V power source before full installation to confirm functionality.

3.2 Mounting the Light Pods:

1. Locate the designated mounting points on your Ford Bronco's modular steel bumper.
2. Attach the provided mounting brackets to the bumper using the supplied hardware. Ensure they are securely fastened.
3. Insert the S1 LED light pods into the bracket openings. The kit includes both spot and spread beam pods. Refer to Image 3.1 for recommended placement or customize as desired.
4. Secure the light pods within the brackets using the appropriate hardware.

Image 3.1: Recommended configuration for spot and spread beam light pods on the modular steel bumper.

3.3 Wiring the Lights:

1. Connect the wiring harnesses to each LED light pod. The connections are waterproof and threaded for secure attachment.
2. Route the wiring harnesses away from moving parts, sharp edges, and heat sources. Use zip ties or cable clips to secure the wiring.
3. Connect the main power and ground wires of the harness to your vehicle's electrical system. This may involve connecting to an existing auxiliary switch panel or installing a new switch. Ensure proper polarity (red for positive, black for negative).
4. Reconnect the vehicle's battery.

3.4 Lens Customization:

The kit includes extra clear and amber lenses, allowing you to change the light color output.

1. To change a lens, carefully remove the existing lens from the light pod.
2. Install the desired clear or amber lens, ensuring it is seated correctly and securely.

Image 3.2: The Voswitch B800 LED Fog Light Kit with clear lenses (left) and amber lenses (right) installed.

Image 3.3: A close-up view of the Voswitch B800 LED Fog Light Kit integrated into the Ford Bronco's modular steel bumper.

Image 3.4: Front view of a Ford Bronco showcasing the installed Voswitch B800 LED Fog Light Kit.

4. Operating Instructions

Once properly installed and wired, the Voswitch B800 LED Fog Light Kit operates via your vehicle's connected switch system.

• Turning On/Off: Activate the lights using the auxiliary switch or factory fog light switch to which they are connected.
• Beam Pattern: The kit provides a combination of spot and spread beam lights. Spot beams offer focused, long-distance illumination, while spread beams provide wider, shorter-range coverage.
• Lens Color: The clear lenses provide a bright white light, suitable for general driving conditions. The amber lenses are often preferred for adverse weather conditions like fog, rain, or snow, as amber light can reduce glare and improve contrast.

Image 4.1: Illustration of the light output with both yellow (amber) and white (clear) lenses.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your Voswitch B800 LED Fog Light Kit.

• Cleaning: Periodically clean the lenses with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens material.
• Inspection: Regularly check all mounting hardware for tightness. Inspect wiring for any signs of wear, fraying, or damage. Ensure all electrical connections remain secure and free from corrosion.
• Lens Condition: If lenses become scratched or damaged, they can be replaced using the extra lenses provided or by contacting Voswitch support for replacements.

6. Troubleshooting

This section addresses common issues you might encounter with your LED fog light kit.

Lights Not Turning On:

• Check Power Connection: Ensure the main power wire is securely connected to a constant 12V source and the ground wire is properly grounded.
• Inspect Fuses: Check any inline fuses in the wiring harness or your vehicle's fuse box for blown fuses. Replace if necessary.
• Verify Switch Functionality: Test the switch connected to the lights to ensure it is operating correctly.
• Individual Pod Connection: Confirm that each LED light pod is securely connected to its wiring harness.

Lights Flickering or Dim:

• Loose Connections: Check all electrical connections for tightness. A loose connection can cause intermittent power.
• Insufficient Ground: Ensure the ground connection is clean and secure to a bare metal surface on the vehicle chassis.
• Voltage Drop: Verify that the vehicle's electrical system is providing adequate voltage (12V) to the lights.

Moisture Inside Lens:

• Seal Integrity: While the lights are designed to be waterproof, inspect the seals around the lenses and wiring connections for any signs of damage or improper seating.
• Condensation: Minor condensation can occur due to temperature changes and usually dissipates. If persistent or excessive, contact support.

If troubleshooting steps do not resolve the issue, contact Voswitch customer support for further assistance.

7. Specifications

8. Warranty and Support

Warranty Information:

The Voswitch B800 LED Fog Light Kit is covered by a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, abuse, modification, or normal wear and tear.

Customer Support:

For technical assistance, warranty claims, or any questions regarding your Voswitch B800 LED Fog Light Kit, please contact Voswitch customer support. Refer to the contact information provided on the Voswitch official website or your purchase documentation.

When contacting support, please have the following information ready:

• Product Model: B800
• Date of Purchase
• Place of Purchase
• Detailed description of the issue