1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Glacier Bay Kendrick Single Hole Single-Handle Bathroom Faucet in Matte Black. Please read this guide thoroughly before beginning installation or use to ensure proper function and longevity of your product.
Image 1.1: The Glacier Bay Kendrick Single Hole Single-Handle Bathroom Faucet in Matte Black.
2. Safety Information
Always observe the following safety precautions during installation and use:
- Turn off the main water supply before beginning any installation or repair work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves.
- Ensure all connections are secure to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified plumber.
3. Package Contents
Verify that all components are present before beginning installation. Refer to the included installation guide for a complete list of parts.
Image 3.1: Overview of the Glacier Bay Kendrick Faucet package contents, including the faucet, deck plate, and installation guide.
4. Setup and Installation
The Glacier Bay Kendrick faucet is designed for single-hole or 4-inch center installations. A deck plate is included for 4-inch center applications.
- Prepare the Sink: Ensure the sink area is clean and free of debris. If replacing an old faucet, remove it and clean the mounting surface.
- Install Deck Plate (if needed): For 4-inch center installations, place the deck plate over the sink holes. Apply a bead of plumber's putty or silicone sealant around the base of the deck plate to ensure a watertight seal.
- Mount the Faucet: Insert the faucet body through the hole(s) in the sink/deck plate. From underneath the sink, secure the faucet with the provided mounting hardware (washer and mounting nut). Tighten securely but do not overtighten.
- Connect Water Supply Lines: Connect the hot and cold water supply lines from the faucet to your home's water supply valves. Use a wrench to tighten connections, ensuring not to overtighten.
- Install Pop-Up Drain Assembly: The faucet includes a push-down pop-up drain assembly. Follow the instructions provided with the drain for proper installation into the sink drain opening. Ensure all seals are correctly seated to prevent leaks.
- Test for Leaks: Once all connections are made, slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, tighten the connections as necessary.
Image 4.1: The Glacier Bay Kendrick Faucet installed in a bathroom sink, showcasing its modern design and the included push-down drain.
5. Operating Instructions
The Glacier Bay Kendrick faucet features a single-handle design for easy control of water flow and temperature.
- Turning On/Off: Lift the handle upwards to turn on the water flow. Push the handle downwards to turn off the water flow.
- Adjusting Temperature: Move the handle to the left for hot water and to the right for cold water. The ceramic disc cartridge ensures precise temperature control.
- Water Flow: The faucet is WaterSense certified with a 1.2 GPM (Gallons Per Minute) flow rate, designed to reduce water usage without compromising performance.
Image 5.1: Water flowing from the faucet, demonstrating its operational state.
6. Maintenance and Care
To maintain the matte black finish and ensure optimal performance of your faucet, follow these care guidelines:
- Cleaning: Clean the faucet regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Spot Cleaning: For water spots or fingerprints, use a mild soap solution and rinse thoroughly with clean water, then dry with a soft cloth.
- Aerator Maintenance: Periodically unscrew the aerator from the spout and clean any mineral deposits or debris that may restrict water flow.
- Ceramic Disc Cartridge: The ceramic disc cartridge is designed for drip-free operation and typically requires no maintenance. If drips occur, contact customer support.
7. Troubleshooting
If you encounter any issues with your faucet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed supply valves. | Clean the aerator. Ensure water supply valves are fully open. |
| Faucet Leaks | Loose connections; worn O-rings or cartridge. | Check and tighten all connections. If leaking persists, contact customer support for replacement parts. |
| Water Temperature Issues | Incorrect handle position; issues with water heater. | Ensure handle is moved fully to hot or cold position. Check water heater settings. |
8. Specifications
- Brand: Glacier Bay
- Model Name: Kendrick
- Item Model Number: 1008028126
- Finish Type: Matte Black
- Material: Metal
- Mounting Type: Deck Mount
- Number of Handles: 1 (Single-Handle)
- Hole Count: 1 (or 3 with included deck plate)
- Maximum Flow Rate: 1.2 Gallons Per Minute (GPM)
- Special Feature: WaterSense certified
- Included Components: Faucet, Deck Plate, Push-Down Pop-Up Drain Assembly
- Item Weight: 2 Pounds
- Product Dimensions: 4 x 2 x 6 inches
9. Warranty and Support
For warranty information or technical assistance, please refer to the warranty card included with your product or contact Glacier Bay customer support directly. Keep your proof of purchase for warranty claims.
Customer Support: Refer to the contact information provided in your product packaging or visit the official Glacier Bay website.
