Introduction
Thank you for choosing the RL live your light Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before installation and operation, and retain them for future reference.
This elegant table lamp features a metal base with a wood look, a black metal lampshade with a gold-yellow interior, and is designed for ambient lighting and decoration. It is suitable for E27 bulbs and includes a convenient cord switch.
Safety Information
- Always disconnect the lamp from the power supply before cleaning or replacing the bulb.
- Ensure the voltage of your power supply matches the lamp's requirements (230 VAC).
- Do not exceed the maximum wattage for the E27 bulb (e.g., 28 watts incandescent, or equivalent LED/CFL).
- This lamp is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Keep out of reach of children and pets.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Package Contents
Please check that all components are present and undamaged:
- 1 x RL live your light Table Lamp (Model: R51571080)
- 1 x Assembly Manual (this document)
- Note: E27 bulb is not included and must be purchased separately.
Setup
- Unpack: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
- Placement: Place the lamp on a stable, flat surface indoors, such as a desk or side table. Ensure there is adequate space around the lamp for proper ventilation and to showcase its light projection.
- Install Bulb:
- Ensure the lamp is unplugged from the power outlet.
- Gently screw an E27 bulb (not included) into the lamp holder until it is secure. Do not overtighten.
- Ensure the bulb's wattage does not exceed 28 watts (for incandescent) or the equivalent for LED/CFL bulbs.
- Connect to Power: Insert the power plug into a suitable wall outlet (230 VAC).

Figure 1: Front view of the RL live your light Table Lamp.
Operating Instructions
- Power On/Off: Locate the cord switch on the power cable. Press the switch to turn the lamp ON or OFF.
- Light Projection: The lamp's unique perforated design creates an attractive play of light and shadow, enhancing the ambiance of your room.

Figure 2: The lamp's light projection creating ambient patterns.
Maintenance
- Cleaning:
- Always unplug the lamp before cleaning.
- Wipe the lamp's exterior with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement:
- Ensure the lamp is unplugged and the bulb has cooled down completely before attempting to replace it.
- Unscrew the old E27 bulb counter-clockwise.
- Screw in a new E27 bulb clockwise, ensuring it is securely fastened but not overtightened.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light flickers. |
|
|
Specifications
| Model Number | R51571080 |
| Brand | RL LIVE YOUR LIGHT |
| Manufacturer | Reality Leuchten GmbH |
| Product Dimensions | 15 x 15 x 21.5 cm (Diameter x Height); 515 g |
| Color | Black (with Gold-yellow interior) |
| Material | Metal (with wood-look base) |
| Finish | Matte |
| Power Source | Corded Electric |
| Voltage | 230 VAC |
| Max. Wattage | 28 watts (for E27 bulb) |
| Bulb Type Compatibility | E27 |
| Switch Style | Cord Switch |
| Installation Type | Freestanding |
| Use Environment | Indoor |
| Special Features | Energy efficient, Ambient lighting, Decorative light projection |

Figure 3: Technical drawing with product dimensions.
Warranty and Support
For warranty information and customer support, please contact Reality Leuchten GmbH directly or refer to the purchase documentation. Keep your proof of purchase for any warranty claims.
For further assistance, you may visit the official RL LIVE YOUR LIGHT website or contact their customer service department.





