ViaBecs Android 13 Car Stereo Instruction Manual for Toyota Tundra (2007-2013) and Toyota Sequoia (2008-2018) - Model CAN005-X with JBL

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your new ViaBecs Android 13 Car Stereo. Please read this manual thoroughly before installation and use to ensure proper functionality and safety. This unit is designed for specific Toyota Tundra (2007-2013) and Toyota Sequoia (2008-2018) models, specifically the CAN005-X variant with JBL sound systems.

Figure 1: ViaBecs Android 13 Car Stereo main unit with 10.2-inch QLED HD Touch Screen.

Setup and Installation

Proper installation is crucial for optimal performance. It is recommended to consult a professional if you are unsure about any steps. Ensure the correct wiring harness is used for your vehicle's specific configuration (with or without JBL amplifier).

1. Wiring Harness Compatibility

This unit is equipped with wiring harness CAN005, suitable for cars with a JBL amplifier and reversing camera. If your vehicle's wiring harness is not compatible, please contact the manufacturer for the correct replacement. For 2014-2019 Toyota Sequoia, the CAN004-X harness (B0BZ7YZDCV) is required.

Figure 2: Visual guide for identifying the correct wiring harness based on your Toyota Tundra (2007-2013) or Toyota Sequoia (2008-2018) factory radio type (with or without JBL).

Figure 3: Wiring harness B: WITH JBL (CAN005-X) included with the unit, showing various connectors for integration.

2. Removing Factory Radio

Refer to the video below for a step-by-step guide on safely removing your vehicle's factory radio. This process typically involves removing trim pieces and unscrewing the existing unit.

3. Canbus Box Connection and Configuration

The Canbus box is essential for integrating the new head unit with your vehicle's existing electronic systems, such as steering wheel controls and factory settings. Ensure the Canbus box is securely connected to the wiring harness and configured correctly for your specific vehicle model.

Canbus Configuration Steps:

1. Establish a Wi-Fi or mobile hotspot connection on the head unit.
2. Navigate to 'Settings' > 'Factory' and enter the password '123456' or '8888' as prompted.
3. Click on 'Select Models' to choose the Canbus option according to the specific model of your vehicle (e.g., Toyota Tundra).
4. The head unit will automatically update the MCU APK through the network after configuring the Canbus option.
5. Upon completion of the update, the head unit will reboot to save the new settings.

Figure 4: Detailed radio wiring diagram showing connections for GPS Antenna, 4G Antenna, USB Inputs, Canbus Port, Sub Output, CVBS Inputs, AUX Inputs, Audio Outputs, 12V+ AMP CONT, External MIC, 4G SIM Slot, and Wifi Antenna.

Operating Instructions

1. Wireless Apple CarPlay and Android Auto

The ViaBecs head unit supports built-in Wireless Apple CarPlay and wired/wireless Android Auto. This allows you to mirror your phone's essential functions onto the car stereo's display, including navigation, music, calls, and messages.

Figure 5: User interface showing options for Wireless Apple CarPlay, Wireless/Wired Android Auto, and Wired/Wireless Mirror Link for iOS/Android devices.

To Connect Wireless CarPlay:

1. Ensure your phone's Bluetooth is enabled.
2. On the head unit, navigate to the 'Apps' menu and select 'Zlink'.
3. The Zlink app will initiate the connection process.
4. If prompted, enter the device PIN (usually '0000').
5. A pairing request will appear on your phone; tap 'Pair' and 'Allow'.
6. Once Bluetooth is paired, the Zlink app will auto-launch and start the wireless CarPlay setup.
7. If the connection takes more than 40 seconds, open your iPhone's Wi-Fi settings and tap on the car radio's hotspot name to connect.
8. To enable auto-connect for CarPlay, go to 'Settings' > 'Factory' > 'Config info' and turn on the option for "Background Connection".

2. Mirror Link

Mirror Link allows you to display your phone's screen directly on the head unit. This is useful for apps not natively supported by CarPlay or Android Auto, or for passengers to view content while the vehicle is parked.

To use Mirror Link, open the 'Kalos' app on the head unit, follow the on-screen instructions, and connect your phone. This typically involves downloading a companion app on your smartphone and enabling screen mirroring.

3. Steering Wheel Control

The head unit supports seamless integration with your vehicle's steering wheel controls. This allows you to adjust volume, switch songs/channels, and answer calls without taking your hands off the wheel, enhancing safety and convenience.

4. Digital Sound Processor (DSP) and Equalizer (EQ)

The built-in DSP with 36-band EQ and TDA7851 4*50W Amplifier output provides extensive control over frequency response. You can customize sound profiles (Rock, Pop, Jazz, etc.) and fine-tune audio settings for optimal sound quality across various music genres. The 48-EQ graphic equalizer ensures precise audio adjustment.

Figure 6: Head unit interface showing detailed DSP and 48-band EQ settings for audio customization, alongside options for Wi-Fi and 4G internet connectivity.

5. Connectivity and Multimedia

• Wi-Fi / 4G Internet: Enjoy online entertainment and communication by connecting to Wi-Fi or inserting a 4G SIM card.
• Bluetooth 5.0: For hands-free calling and audio streaming.
• USB: Multiple USB ports for media playback and Android Auto connection.
• Microphone: Ultra-clear noise-cancelling built-in MIC and 3.5mm external MIC jack for clear call sound.
• Split-screen Multitasking: The split-screen function allows you to switch between apps with ease, enhancing the driving experience.

Figure 7: Illustration of the ultra-clear microphone feature, highlighting its noise-cancelling capabilities for improved call quality.

Maintenance

1. Software Updates (Tlink5)

Regularly updating the Tlink5 app ensures optimal performance and resolves potential issues. Updates can be performed online or via USB.

Online Update Method:

1. Ensure the car stereo is connected to Wi-Fi or a mobile hotspot.
2. Open the 'Dofun Play' app.
3. Navigate to the 'Class' or 'Manage' section and tap 'Update' next to 'T-Link5'.
4. Once downloaded, tap 'Install' and wait for the installation to finish.

USB Installation Method:

1. Download the Tlink5 installer file to your computer and save it to a USB stick.
2. Plug the USB stick into your car radio's USB port.
3. Open the 'File Manager' on your head unit, find the installer file in the USB folder, and tap it to begin installation.
4. Once installed, launch Tlink5 and connect to wireless CarPlay.

Troubleshooting

1. Wireless CarPlay Connection Problems

If you experience issues with wireless CarPlay, particularly with call audio (e.g., others cannot hear you), updating the Tlink5 app to the latest version can resolve these problems. Refer to the 'Maintenance' section for update instructions.

2. Dofun Play App Not Visible

If the 'Dofun Play' app is not visible on your screen, you may need to enable it through the factory settings:

1. Go to 'Settings' > 'Factory'.
2. Enter the password '123456'.
3. Navigate to 'Config info'.
4. Turn on the option for "Dofunplay".

3. Wiring Harness Incompatibility

If the provided wiring harness is not compatible with your car, contact the manufacturer for the correct replacement. Do not attempt to force connections or modify the harness, as this may damage the unit or your vehicle's electrical system.

Specifications

Warranty and Support

The product comes with a return policy allowing for refund/replacement for 2026 days from the date of purchase. Protection plans are also available for extended coverage.

• 2-Year Protection Plan: $43.99
• 3-Year Protection Plan: $57.99
• Complete Protect: $16.99/month (covers all eligible past and future purchases)

For any questions or support, please contact the seller, Kasa Official Store, directly through the Amazon platform.

Figure 8: Visual guide on how to locate and contact the seller, Kasa Official Store, for product support via Amazon.