YMOO B06T1 Bluetooth Transmitter Receiver & Y7 Bluetooth Headphones User Manual

Introduction

The YMOO B06T1 is a versatile Bluetooth transmitter and receiver, designed to enhance your audio experience by enabling wireless connectivity for a wide range of devices. Paired with the YMOO Y7 Bluetooth Headphones, this system delivers high-fidelity sound with advanced features like Active Noise Cancellation. This manual provides comprehensive instructions for setting up, operating, and maintaining your device.

Key Features

• High-Resolution Audio: 40mm dynamic speaker with bio-diaphragm for clear audio reproduction up to 40kHz.
• Active Noise Cancellation (ANC): Features 3 built-in microphones and a fine-tuned digital algorithm to effectively reduce low and mid-frequency ambient noise. Note: ANC is not supported in wired mode.
• Bluetooth 5.2 Technology: Provides a stable wireless connection up to 50 feet, ensuring consistent and clear sound.
• Dual Functionality: The B06T1 unit operates as both a Bluetooth transmitter (TX) and a receiver (RX).
• Wired and Wireless Connectivity: Offers flexible listening options for various audio devices.

Package Contents

• YMOO B06T1 Bluetooth Transmitter Receiver Unit
• YMOO Y7 Wireless Headphones
• USB-C Charging Cable
• 3.5mm Audio Cable
• Airplane Adapter

Product Overview

The complete YMOO B06T1 and Y7 headphone package, including the transmitter/receiver, headphones, and various cables/adapters.

Detailed view of the compact YMOO B06T1 Bluetooth Transmitter Receiver unit with its M/U button and indicator light.

The YMOO Y7 Bluetooth Headphones, showcasing the earcups and control buttons.

Setup Guide

Charging

Before first use, fully charge both the YMOO B06T1 unit and the Y7 headphones using the provided USB-C charging cable. Connect the cable to a standard USB power adapter (not included). The indicator lights will show charging status and turn off when fully charged.

Power On/Off

• To Power On: Press and hold the Power/Multi-function button on both devices until the indicator light illuminates.
• To Power Off: Press and hold the Power/Multi-function button on both devices until the indicator light turns off.

Bluetooth Pairing (Headphones)

1. Ensure the Y7 headphones are powered off.
2. Press and hold the Power button for approximately 5 seconds until the indicator light flashes blue and red alternately, indicating pairing mode.
3. On your Bluetooth-enabled device (e.g., smartphone, tablet), search for "YMOO Y7" in the Bluetooth settings.
4. Select "YMOO Y7" to connect. The indicator light will turn solid blue when successfully paired.

Bluetooth Pairing (Transmitter/Receiver Unit)

1. Ensure the B06T1 unit is powered on.
2. Toggle the switch to select either TX (Transmitter) or RX (Receiver) mode.
3. In TX mode, connect the B06T1 to your audio source (e.g., TV, PC) via the 3.5mm audio cable. The unit will automatically enter pairing mode.
4. In RX mode, connect the B06T1 to your non-Bluetooth audio device (e.g., wired headphones, speaker) via the 3.5mm audio cable. The unit will automatically enter pairing mode.
5. On your Bluetooth device (for RX mode) or Bluetooth headphones (for TX mode), initiate pairing. The B06T1's indicator light will confirm connection.

Operating Instructions

Using as Transmitter (TX Mode)

In TX mode, the B06T1 transmits audio from a non-Bluetooth source to your Bluetooth headphones or speaker.

1. Set the B06T1 to TX mode.
2. Connect the B06T1 to your audio source (e.g., TV, game console, in-flight entertainment system) using the 3.5mm audio cable or airplane adapter.
3. Ensure your Bluetooth headphones (e.g., Y7 headphones) are in pairing mode.
4. The B06T1 will automatically search for and connect to nearby Bluetooth audio devices.

The B06T1 in TX mode, connected to a TV, enabling wireless audio for two users with aptX-Low Latency support.

Enjoying wireless audio from an in-flight entertainment system by connecting the B06T1 in TX mode.

Using as Receiver (RX Mode)

In RX mode, the B06T1 receives Bluetooth audio from your smartphone or other Bluetooth device and outputs it to a non-Bluetooth audio system.

1. Set the B06T1 to RX mode.
2. Connect the B06T1 to your wired headphones, car stereo, or home audio system using the 3.5mm audio cable.
3. On your smartphone or other Bluetooth device, search for and connect to the B06T1.
4. Once connected, audio from your Bluetooth device will play through the connected wired system.

Active Noise Cancellation (ANC) - Y7 Headphones

To activate or deactivate ANC on the Y7 headphones, locate the dedicated ANC button on the earcup and press it. An audible prompt or indicator light will confirm the ANC status. Remember, ANC functionality is not available when the headphones are used in wired mode.

Media Controls - Y7 Headphones

• Play/Pause: Press the Multi-function button once.
• Volume Up: Press the '+' button.
• Volume Down: Press the '-' button.
• Next Track: Press and hold the '+' button.
• Previous Track: Press and hold the '-' button.
• Answer/End Call: Press the Multi-function button once.
• Reject Call: Press and hold the Multi-function button.

Care and Maintenance

• Keep the devices dry. Do not expose them to rain or moisture.
• Clean with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Store in a cool, dry place away from extreme temperatures.
• Avoid dropping or subjecting the devices to strong impacts.
• Do not attempt to disassemble or modify the devices, as this will void the warranty.

Troubleshooting

Technical Specifications

Warranty and Support

YMOO products typically come with a standard manufacturer's warranty. For specific warranty details, return policies, or technical support, please refer to the product's official listing page on Amazon or visit the official YMOO brand store. Keep your purchase receipt for warranty claims.

YMOO Brand Store: Visit YMOO Store on Amazon