Introduction
Thank you for choosing the VASAGLE EKHO Collection Bar Stools. These stools are designed to blend synthetic leather with refined stitching, offering a mid-century modern aesthetic. They feature a comfortable, high-density foam seat and robust steel legs with concealed adjustable feet for stability. This manual provides detailed instructions for assembly, usage, maintenance, and troubleshooting to ensure a long-lasting and satisfying experience with your product.
Safety Information
- Maximum Weight Capacity: Do not exceed the maximum static load of 265 lb (120 kg) per seat. Overloading can cause damage or injury.
- Assembly: Ensure all parts are correctly assembled and fasteners are tightened securely before use. Periodically check and re-tighten fasteners as needed.
- Placement: Place the stools on a flat, stable surface. Avoid placing them on uneven floors without adjusting the feet, as this can lead to instability.
- Children: Keep children away from small parts during assembly. Do not allow children to climb or play on the stools unsupervised.
- Movement: Do not drag the stools across the floor, as this may damage the floor or the stool legs. Lift and move them carefully.
- Heat Sources: Keep the stools away from direct heat sources, such as radiators or fireplaces, to prevent material damage.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 2 x Bar Stool
- 1 x Accessory Kit (includes necessary screws and tools)
- 1 x Instructions Manual (this document)
Setup and Assembly
Assembly of these bar stools is designed to be straightforward. Follow the steps below carefully.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Seat to Frame: Align the pre-drilled holes on the underside of the seat cushion with the holes on the top of the metal frame. Secure using the provided screws and Allen wrench. Do not overtighten initially.
- Install Footrests: Attach the horizontal footrest bars to the vertical frame legs using the designated screws. Ensure they are oriented correctly for proper support.
- Final Tightening: Once all components are loosely assembled, place the stool on a flat surface. Apply gentle pressure to ensure it sits evenly, then fully tighten all screws.
- Adjust Feet: If the stool wobbles, use the concealed adjustable feet at the bottom of the legs to level it on uneven floors.
Operating and Usage
The VASAGLE EKHO Bar Stools are designed for comfortable seating at counter height. The roomy 15"D x 17.7"W seat surface, filled with 3.9" thick high-density foam, provides excellent support. The attached footrests allow for a relaxed seating posture. Ensure the stools are stable before sitting. The concealed adjustable feet can be used to compensate for minor floor irregularities, providing a stable and secure seating experience.
Maintenance and Care
Proper care will help maintain the appearance and longevity of your bar stools.
- Cleaning: The water-resistant synthetic leather cover can be wiped clean with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, which may damage the material.
- Spills: Promptly wipe up any spills to prevent staining.
- Frame Care: The matte steel legs are designed to resist scratches. Wipe with a soft, dry cloth to remove dust.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool wobbles after assembly. | Uneven floor or loose connections. | Adjust the concealed feet at the bottom of the legs. Ensure all screws are fully tightened. |
| Difficulty assembling parts. | Incorrect orientation or misaligned holes. | Refer to the assembly diagram and ensure parts are oriented correctly. Do not force parts together. Loosen all screws, align, then re-tighten. |
| Seat cushion feels less supportive over time. | Normal wear and tear. | The high-density foam is designed for durability, but all materials experience some compression over extended use. Ensure weight limits are not exceeded. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (D x W x H) | 15" x 17.7" x 26" (38 x 45 x 66 cm) |
| Seat Height | 26 Inches (66 cm) |
| Seat Material | High-Density Foam, PU (Polyurethane) Leather |
| Frame Material | Metal (Steel) |
| Color | Caramel Brown |
| Item Weight | 24.6 Pounds (11.16 kg) |
| Maximum Weight Recommendation | 265 Pounds (120 kg) per seat |
| Number of Pieces | 2 |
| Model Number | ULBC086K01 |
| UPC | 194343057323 |
Warranty and Support
For warranty information or if you encounter any issues not covered in this manual, please contact VASAGLE customer support. Keep your purchase receipt for any warranty claims. Our team is dedicated to providing assistance and ensuring your satisfaction with our products.
For further assistance, please visit the official VASAGLE website or contact your retailer.