PHI VILLA Patio Furniture Chair Set (2 PCS) Instruction Manual

Introduction

Thank you for choosing the PHI VILLA Patio Furniture Chair Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor conversation set. Please read these instructions thoroughly before assembly and retain them for future reference.

The PHI VILLA Patio Furniture Chair Set, featuring two comfortable swivel chairs.

Safety Information

Please observe the following safety precautions to prevent injury and damage to the product:

• Some assembly is required. Be cautious when handling heavy metal parts.
• Always follow the assembly instructions carefully to avoid injury.
• Keep children and pets away from the assembly area. Small parts can be a choking hazard.
• Do not overload the chairs. Each chair has a maximum weight capacity of 400 lbs.
• Regularly inspect all bolts and connections to ensure they remain tight.
• Do not use the chairs on uneven surfaces, which could lead to instability.

Package Contents

Before beginning assembly, ensure all parts are present and accounted for. If any parts are missing or damaged, please contact customer support.

• 2 x Swivel Padded Sofa Chairs (Frame)
• 2 x Seat Cushions (5.75" thick)
• 2 x Back Cushions
• Assembly Hardware (bolts, washers, nuts)
• Assembly Tool (e.g., Hex Key)

The complete PHI VILLA Patio Furniture Chair Set as packaged.

Assembly Instructions

Follow these steps to assemble your PHI VILLA Swivel Padded Sofa Chairs. It is recommended to have two people for assembly.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Identify each part using the included parts list.
2. Attach Chair Base to Seat Frame: Align the swivel base with the pre-drilled holes on the underside of the chair's seat frame. Insert the appropriate bolts and washers. Do not fully tighten the bolts yet.
3. Attach Backrest to Seat Frame: Connect the backrest to the seat frame, aligning the holes. Insert bolts and washers. Again, do not fully tighten.
4. Secure All Connections: Once all parts are loosely assembled, gently place the chair on a level surface. Gradually tighten all bolts using the provided tool, ensuring the chair is stable and level. Over-tightening one bolt before others can cause misalignment.
5. Place Cushions: Position the seat and back cushions onto the assembled chair. The cushions are designed for a snug fit and optimal comfort.

Side view of the swivel chair, illustrating the frame structure.

Front view of the swivel chair, showing the padded seat and back.

Operating Instructions

Your PHI VILLA Swivel Padded Sofa Chairs are designed for comfort and versatility in outdoor settings.

• Swivel Function: The chairs feature a 360-degree swivel mechanism. To rotate, simply apply gentle pressure with your feet or body in the desired direction. Ensure there are no obstructions around the chair before swiveling.
• Comfortable Seating: The 5.75-inch thick seat cushions and soft back cushions provide ample support. Adjust your seating position as needed for maximum comfort.
• Weight Capacity: Each chair is designed to support up to 400 lbs. Do not exceed this weight limit to ensure safety and product longevity.

The back design of the swivel chair, providing comfortable support.

Maintenance

Proper care and maintenance will extend the life and appearance of your patio furniture.

• Frame Care: The full metal steel frame is treated with a rust-proof coating. To clean, simply wipe with a damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Cushion Care: The cushions are made with 230g Olefin fabric, which is water-proof, oil-proof, and stain-proof. For spills, wipe clean immediately with a soft cloth and mild soap solution. Allow to air dry completely.
• Seasonal Storage: During prolonged periods of non-use or inclement weather, it is recommended to store cushions indoors or cover the furniture with a protective cover to prevent wear and tear.
• Regular Inspection: Periodically check all bolts and connections for tightness and re-tighten as necessary.

The 5.75-inch thick cushions are designed for comfort and durability.

Cushion Pro Technology ensures water, oil, and stain resistance for easy cleaning.

Troubleshooting

If you encounter any issues, refer to the following common problems and solutions:

• Difficulty during Assembly: If holes do not align perfectly, ensure all bolts are only finger-tightened initially. Once all bolts are in place, then gradually tighten them in a crisscross pattern. Avoid forcing parts together.
• Unstable Chair: Check that all bolts are securely tightened. Ensure the chair is on a flat, level surface. If the issue persists, disassemble and reassemble, paying close attention to bolt alignment.
• Cushion Stains: For stubborn stains, use a mild detergent mixed with water and gently scrub the affected area with a soft brush. Rinse thoroughly and allow to air dry. Do not machine wash or tumble dry.
• Swivel Mechanism Sticking: Ensure the swivel base is clean and free of debris. A small amount of silicone-based lubricant can be applied to the moving parts if necessary, avoiding contact with fabric.

Specifications

Detailed dimensions of the PHI VILLA Swivel Sofa Patio Armchair.

Warranty and Support

For warranty information, please refer to the documentation included with your purchase or contact PHI VILLA customer support directly. If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please reach out to the manufacturer's customer service team.

Contact information can typically be found on the product packaging or the official PHI VILLA website.