Introduction
The HammerHead Showers Solid Metal Shower Head Filter is designed to improve your shower water quality by reducing chlorine and heavy metals. This filter features a durable lead-free brass housing and utilizes KDF 55 and Calcium Sulfite filtration media for effective contaminant neutralization. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your shower filter.
Key features include:
- Effective Filtration: Contains 450 grams of KDF and Calcium Sulfite to neutralize chlorine and heavy metals.
- Durable Construction: Made with lead-free brass housing for enhanced durability and longevity.
- High Output Cartridge: Rated for 6 months or 10,000 gallons of use.
- Universal Compatibility: Features ½” NPT standard thread sizing, compatible with various shower head types (fixed, handheld, rain, dual).
Setup: Installation Guide
Follow these steps for a quick and easy installation of your HammerHead Showers Solid Metal Shower Head Filter. No special tools are required, and thread seal tape is included.
- Remove Existing Shower Head: Carefully unscrew your current shower head from the shower arm.
- Apply Thread Seal Tape: Wrap the threads of the shower arm with the included thread seal tape (Teflon tape). Apply 3-5 wraps clockwise to ensure a watertight seal.
- Attach Filter to Shower Arm: Screw the HammerHead Showers filter onto the shower arm. Hand-tighten first, then use a wrench to tighten an additional quarter to half turn. Do not overtighten.
- Attach Shower Head to Filter: Screw your shower head onto the bottom of the HammerHead Showers filter. Hand-tighten first, then use a wrench to tighten an additional quarter to half turn. Do not overtighten.
- Check for Leaks: Turn on the water and check for any leaks at the connections. If leaks occur, tighten slightly more or reapply thread seal tape.
Operating Instructions
Once installed, the HammerHead Showers filter operates automatically with your shower. No special actions are required for its function.
- The filter works by passing water through its KDF and Calcium Sulfite media, which react with and neutralize chlorine and heavy metals.
- You may notice an immediate improvement in water quality, including reduced chlorine odor and a softer feel to the water.
- The filter is designed to maintain optimal water pressure. If you experience a significant drop in pressure, refer to the troubleshooting section.
Video: Official demonstration of the HammerHead Showers filter's effectiveness in removing chlorine from water.
Video: Official product demonstration showcasing the all-metal construction and features of the HammerHead Showers filter.
Maintenance: Filter Replacement
To maintain optimal filtration performance, the filter cartridge should be replaced every 6 months or after 10,000 gallons of use, whichever comes first.
- Turn Off Water Supply: Ensure the water supply to your shower is completely turned off before proceeding.
- Unscrew Filter Housing: Carefully unscrew the two halves of the filter housing. Water may drip out, so have a towel ready.
- Remove Old Cartridge: Remove the used filter cartridge from the housing.
- Insert New Cartridge: Place a new HammerHead Showers replacement filter cartridge into the housing. Ensure it is seated correctly.
- Reassemble Housing: Screw the two halves of the filter housing back together. Hand-tighten firmly.
- Turn On Water Supply: Slowly turn the water supply back on and check for leaks.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Improperly tightened connections or insufficient thread seal tape. | Ensure connections are hand-tightened, then use a wrench for an additional quarter to half turn. Reapply thread seal tape if necessary. Check that rubber washers are properly seated. |
| Reduced Water Pressure | Clogged filter cartridge or improper installation. | Check if the filter cartridge is due for replacement. Ensure the filter is installed correctly and not overtightened, which could restrict flow. |
| No Improvement in Water Quality | Expired filter cartridge or specific water contaminants not addressed by this filter type. | Replace the filter cartridge if it has exceeded its lifespan (6 months or 10,000 gallons). Note that this filter primarily targets chlorine and heavy metals, not water hardness or other specific contaminants. |
Specifications
- Brand: HammerHead Showers
- Model Name: HammerHead Showers Inline Shower Filter CH
- Model Number: HH-CH450-B
- Material: Brass
- Product Dimensions (L x W x H): 6" x 4.33" x 3.5"
- Item Weight: 450 g
- Capacity (Filtration Media): 450 g
- Installation Type: Wall Mount (Inline)
- Purification Method: Oxidation Reduction Potential (KDF 55, Calcium Sulfite)
- Filter Life Cycle: 6 months or 10,000 gallons
- Supported Water TDS Level Maximum: 500 PPM
- Included Components: 1 Shower Filter Housing, 1 Filter Cartridge
- UPC: 850052598075
Warranty and Support
HammerHead Showers products are designed for durability and performance. This shower filter features a solid metal construction built to last.
- Warranty: HammerHead Showers products are backed by a lifetime commitment to quality. For specific warranty details, please refer to the official HammerHead Showers website or contact customer support.
- Customer Support: For any questions, technical assistance, or to purchase replacement cartridges, please visit the HammerHead Showers official website or contact their customer service department.