1. Introduction
This manual provides essential information for the safe and effective use, maintenance, and care of your Alpinestars Supertech M10 Fame Helmet. Please read this manual thoroughly before using your helmet and retain it for future reference.
The Alpinestars Supertech M10 helmet is engineered to provide advanced protection and performance for riders. Its design focuses on excellent ventilation, comfort, and lightweight construction, without compromising safety. The helmet features an aerodynamic profile designed to reduce friction upon impact, aiding in the efficient transfer of energy away from the rider's head.
2. Safety Information
WARNING: Failure to follow these instructions may result in serious injury or death.
- Always wear a helmet that fits correctly and is securely fastened.
- This helmet is designed to absorb impact energy by partial destruction of the shell and liner. Even minor impacts can compromise the helmet's protective capabilities.
- Never modify your helmet. Any modifications, including painting, attaching accessories, or altering internal components, can reduce its protective capacity.
- Do not expose the helmet to petroleum products, cleaning agents, paints, adhesives, or other solvents, as these can damage the helmet materials without visible signs.
- Legal Disclaimer: This helmet is DOT approved and FMVSS 218 certified for legal on-road motorcycle use in the United States. Ensure your helmet meets local safety standards for your region.
- The collarbone protection is an important design feature of the Supertech helmet shell base profile, designed to minimize injury risk.
3. Setup and Fitting
Proper helmet fit is crucial for safety and comfort. Follow these steps to ensure your helmet is correctly set up.
3.1 Head Measurement
To determine your correct helmet size, measure your head circumference just above your eyebrows and ears. Refer to the size guide below.
Image Description: A diagram illustrating how to measure head circumference for helmet sizing. It shows a measuring tape placed around the head, just above the eyebrows and ears. A table provides corresponding head circumference measurements in centimeters and inches for various helmet sizes (XS, S, M, L, XL, XXL).
3.2 Visor Installation and Adjustment
The Supertech M10 features a unique, patented visor release system for easy installation and adjustment. Consult the detailed instructions provided with your helmet for specific steps on attaching and positioning the visor securely.
3.3 A-Head Fitting System
The patented A-Head fitting system allows for height and angle adjustment, ensuring a personalized and secure fit. Adjust the internal padding and straps to achieve a snug fit that does not cause pressure points but prevents excessive movement.
Image Description: An interior view of the Alpinestars Supertech M10 helmet, showcasing the red internal padding and the chin strap mechanism. This view highlights the comfort and safety features within the helmet.
4. Operating Instructions
Once properly fitted, ensure the chin strap is securely fastened before each ride. The helmet should not move freely on your head when shaken. The aerodynamic shape and ventilation system are designed for optimal performance during use.
Image Description: A side profile view of the Alpinestars Supertech M10 Fame Helmet in black and carbon finish. The image highlights the helmet's sleek design, visor, and ventilation ports.
5. Maintenance and Care
Proper maintenance extends the life and effectiveness of your helmet.
- Cleaning the Shell: Use a soft cloth dampened with mild soap and water. Avoid harsh chemicals or abrasive cleaners.
- Cleaning the Interior: Removable liners can often be hand-washed with mild soap and air-dried. Refer to specific care labels if available.
- Storage: Store your helmet in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store it near heat sources or chemicals.
- Inspection: Regularly inspect the helmet for any signs of damage, such as cracks in the shell, frayed straps, or worn padding. Replace the helmet if any damage is found or after any significant impact.
6. Troubleshooting
If you encounter issues with your helmet, consider the following:
- Poor Fit: Re-check your head measurement against the size guide. Ensure the A-Head fitting system is adjusted correctly. If the helmet is too loose or too tight, it may be the wrong size.
- Discomfort/Pressure Points: Adjust the internal padding. If discomfort persists, the helmet shape may not be compatible with your head shape, or the size may be incorrect.
- Visor Issues: Ensure the visor is correctly seated in its mechanism. Refer to the visor installation instructions.
- Unusual Noise: Check for loose components or improperly sealed vents.
For issues not resolved by these steps, contact Alpinestars customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | Alpinestars Supertech M10 Fame Helmet |
| Part Number | 8300423-1902-XL |
| Shell Type | Hard, Carbon Fiber Multi-composite |
| Outer Material | Carbon Fiber |
| Inner Material | Expanded Polystyrene (EPS) |
| Safety Certifications | DOT FMVSS 218 |
| Shape | Aerodynamic |
| Weight | Approximately 3.08 Kilograms (Package Weight) |
| Key Features | Patented Visor Release System, Patented A-Head Fitting System, Collarbone Protection Profile |
8. Warranty and Support
Warranty: This Alpinestars helmet comes with a 30-day warranty for exchanges and returns. Please retain your proof of purchase for warranty claims.
Customer Support: For further assistance, technical support, or warranty inquiries, please visit the official Alpinestars store or contact their customer service department.
